From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Muhammad Ghias" Subject: RE: [PATCH] CAN: sja1000: Add support for Connect Tech Inc's Canpro/104-Plus Opto CAN board Date: Wed, 17 Oct 2012 14:42:12 -0400 Message-ID: <036301cdac97$1ee892d0$5cb9b870$@connecttech.com> References: <02ac01cdabe1$b5403e10$1fc0ba30$@connecttech.com> <507E84C5.2040600@pengutronix.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <507E84C5.2040600@pengutronix.de> Content-Language: en-ca Sender: linux-kernel-owner@vger.kernel.org To: 'Marc Kleine-Budde' Cc: 'Wolfgang Grandegger' , linux-kernel@vger.kernel.org, linux-can@vger.kernel.org List-Id: linux-can.vger.kernel.org Hi Marc, I tested the patch v2 with kernel 3.6.1 and 3.7-rc1. Clean compile and works with hardware. Regards, Muhammad -----Original Message----- From: Marc Kleine-Budde [mailto:mkl@pengutronix.de] Sent: October-17-12 6:13 AM To: Muhammad Ghias Cc: 'Wolfgang Grandegger'; linux-kernel@vger.kernel.org; linux-can@vger.kernel.org Subject: Re: [PATCH] CAN: sja1000: Add support for Connect Tech Inc's Canpro/104-Plus Opto CAN board On 10/16/2012 11:03 PM, Muhammad Ghias wrote: > Patch adds support for CANpro/104-Plus Opto CAN board. Board uses PLX9030 > bridge and two NXP SJA1000 CAN controllers. Patch is generated and tested > with kernel 3.6.1. > > If you have any questions or any feedback please let me know. Thanks, the code looks good. Please try, if possible, to send your patches via git send-email, as outlooks messed up the patch. I've fixed all line wrapping problems by hand, applied the patch and send a v2, please test. regards, Marc P.S.: Please use the linux-can@vger.kernel.org mailing list for CAN related patches/topics. -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |