From: AnilKumar Ch <anilkumar@ti.com>
To: wg@grandegger.com, mkl@pengutronix.de, linux-can@vger.kernel.org
Cc: anantgole@ti.com, nsekhar@ti.com, AnilKumar Ch <anilkumar@ti.com>
Subject: [RESEND PATCH v3 2/5] can: c_can: fix an interrupt thrash issue with c_can driver
Date: Wed, 23 May 2012 15:06:25 +0530 [thread overview]
Message-ID: <1337765788-1169-3-git-send-email-anilkumar@ti.com> (raw)
In-Reply-To: <1337765788-1169-1-git-send-email-anilkumar@ti.com>
This patch fixes an interrupt thrash issue with c_can driver.
In c_can_isr() function interrupts are disabled and enabled only in
c_can_poll() function. c_can_isr() & c_can_poll() both read the
irqstatus flag. However, irqstatus is always read as 0 in c_can_poll()
because all C_CAN interrupts are disabled in c_can_isr(). This causes
all interrupts to be re-enabled in c_can_poll() which in turn causes
another interrupt since the event is not really handled. This keeps
happening causing a flood of interrupts.
To fix this, read the irqstatus register in isr and use the same cached
value in the poll function.
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
---
Link to previous submission
http://marc.info/?t=133664994000003&r=1&w=2
drivers/net/can/c_can/c_can.c | 7 +++----
drivers/net/can/c_can/c_can.h | 1 +
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 9ac28df..fa01621 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -952,7 +952,7 @@ static int c_can_poll(struct napi_struct *napi, int quota)
struct net_device *dev = napi->dev;
struct c_can_priv *priv = netdev_priv(dev);
- irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
+ irqstatus = priv->irqstatus;
if (!irqstatus)
goto end;
@@ -1030,12 +1030,11 @@ end:
static irqreturn_t c_can_isr(int irq, void *dev_id)
{
- u16 irqstatus;
struct net_device *dev = (struct net_device *)dev_id;
struct c_can_priv *priv = netdev_priv(dev);
- irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
- if (!irqstatus)
+ priv->irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
+ if (!priv->irqstatus)
return IRQ_NONE;
/* disable all interrupts and schedule the NAPI */
diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
index 9b7fbef..5f32d34 100644
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -76,6 +76,7 @@ struct c_can_priv {
unsigned int tx_next;
unsigned int tx_echo;
void *priv; /* for board-specific data */
+ u16 irqstatus;
};
struct net_device *alloc_c_can_dev(void);
--
1.7.0.4
next prev parent reply other threads:[~2012-05-23 9:37 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-23 9:36 [RESEND PATCH v3 0/5] can: c_can: Add support for Bosch D_CAN controller AnilKumar Ch
2012-05-23 9:36 ` [RESEND PATCH v3 1/5] can: c_can: fix "BUG! echo_skb is occupied!" during transmit AnilKumar Ch
2012-05-23 9:36 ` AnilKumar Ch [this message]
2012-05-23 9:36 ` [RESEND PATCH v3 3/5] can: c_can: fix race condition in c_can_open() AnilKumar Ch
2012-05-23 9:36 ` [RESEND PATCH v3 4/5] can: c_can: Move overlay structure to array with offset as index AnilKumar Ch
2012-05-23 9:56 ` Marc Kleine-Budde
2012-05-23 11:13 ` Oliver Hartkopp
2012-05-23 9:36 ` [RESEND PATCH v3 5/5] can: c_can: Add support for Bosch D_CAN controller AnilKumar Ch
2012-05-23 9:46 ` [RESEND PATCH v3 0/5] " AnilKumar, Chimata
-- strict thread matches above, loose matches on Subject: below --
2012-05-23 12:15 [PATCH v4 " AnilKumar Ch
2012-05-23 12:15 ` [RESEND PATCH v3 2/5] can: c_can: fix an interrupt thrash issue with c_can driver AnilKumar Ch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1337765788-1169-3-git-send-email-anilkumar@ti.com \
--to=anilkumar@ti.com \
--cc=anantgole@ti.com \
--cc=linux-can@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=nsekhar@ti.com \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).