linux-can.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Fabio Baltieri <fabio.baltieri@gmail.com>
To: Marc Kleine-Budde <mkl@pengutronix.de>, linux-can@vger.kernel.org
Cc: Kurt Van Dijck <kurt.van.dijck@eia.be>,
	Wolfgang Grandegger <wg@grandegger.com>,
	Oliver Hartkopp <socketcan@hartkopp.net>,
	linux-kernel@vger.kernel.org,
	Fabio Baltieri <fabio.baltieri@gmail.com>
Subject: [PATCH 2/9] can: flexcan: add LED trigger support
Date: Sun, 16 Dec 2012 12:08:26 +0100	[thread overview]
Message-ID: <1355656113-9562-3-git-send-email-fabio.baltieri@gmail.com> (raw)
In-Reply-To: <1355656113-9562-1-git-send-email-fabio.baltieri@gmail.com>

Add support for canbus activity led indicators on flexcan devices by
calling appropriate can_led_* functions.

These are only enabled when CONFIG_CAN_LEDS is Y, becomes no-op
otherwise.

Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
---
 drivers/net/can/flexcan.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 0289a6d..769d29e 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -23,6 +23,7 @@
 #include <linux/can.h>
 #include <linux/can/dev.h>
 #include <linux/can/error.h>
+#include <linux/can/led.h>
 #include <linux/can/platform/flexcan.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
@@ -564,6 +565,8 @@ static int flexcan_read_frame(struct net_device *dev)
 	stats->rx_packets++;
 	stats->rx_bytes += cf->can_dlc;
 
+	can_led_event(dev, CAN_LED_EVENT_RX);
+
 	return 1;
 }
 
@@ -652,6 +655,7 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
 	if (reg_iflag1 & (1 << FLEXCAN_TX_BUF_ID)) {
 		stats->tx_bytes += can_get_echo_skb(dev, 0);
 		stats->tx_packets++;
+		can_led_event(dev, CAN_LED_EVENT_TX);
 		flexcan_write((1 << FLEXCAN_TX_BUF_ID), &regs->iflag1);
 		netif_wake_queue(dev);
 	}
@@ -865,6 +869,9 @@ static int flexcan_open(struct net_device *dev)
 	err = flexcan_chip_start(dev);
 	if (err)
 		goto out_close;
+
+	can_led_event(dev, CAN_LED_EVENT_OPEN);
+
 	napi_enable(&priv->napi);
 	netif_start_queue(dev);
 
@@ -893,6 +900,8 @@ static int flexcan_close(struct net_device *dev)
 
 	close_candev(dev);
 
+	can_led_event(dev, CAN_LED_EVENT_STOP);
+
 	return 0;
 }
 
@@ -1092,6 +1101,8 @@ static int flexcan_probe(struct platform_device *pdev)
 		goto failed_register;
 	}
 
+	devm_can_led_init(dev);
+
 	dev_info(&pdev->dev, "device registered (reg_base=%p, irq=%d)\n",
 		 priv->base, dev->irq);
 
-- 
1.7.12.1

  parent reply	other threads:[~2012-12-16 11:08 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-12-16 11:08 [PATCH 0/9] tx/rx LED trigger support Fabio Baltieri
2012-12-16 11:08 ` [PATCH 1/9] can: add " Fabio Baltieri
2012-12-17  7:28   ` Bernd Krumboeck
2012-12-17  9:34     ` Kurt Van Dijck
2012-12-17 17:41     ` Fabio Baltieri
2012-12-17 20:20       ` "Bernd Krumböck"
2012-12-17 21:42         ` Fabio Baltieri
2012-12-18  6:02           ` "Bernd Krumböck"
2012-12-16 11:08 ` Fabio Baltieri [this message]
2012-12-16 11:08 ` [PATCH 3/9] can: at91_can: add " Fabio Baltieri
2012-12-16 11:08 ` [PATCH 4/9] can: ti_hecc: " Fabio Baltieri
2012-12-16 11:08 ` [PATCH 5/9] can: c_can: " Fabio Baltieri
2012-12-16 11:08 ` [PATCH 6/9] can: mcp251x: " Fabio Baltieri
2012-12-16 11:08 ` [PATCH 7/9] can: sja1000: " Fabio Baltieri
2012-12-16 11:08 ` [PATCH 8/9] can: export a safe netdev_priv wrapper for candev Fabio Baltieri
2012-12-16 11:08 ` [PATCH 9/9] can: rename LED trigger name on netdev renames Fabio Baltieri
2012-12-16 22:37 ` [PATCH 0/9] tx/rx LED trigger support Marc Kleine-Budde
2012-12-16 22:51   ` Fabio Baltieri

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1355656113-9562-3-git-send-email-fabio.baltieri@gmail.com \
    --to=fabio.baltieri@gmail.com \
    --cc=kurt.van.dijck@eia.be \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mkl@pengutronix.de \
    --cc=socketcan@hartkopp.net \
    --cc=wg@grandegger.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).