From: Alexander Stein <alexander.stein@systec-electronic.com>
To: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Cc: "Rostislav Lisový" <lisovy@gmail.com>,
"Michal Sojka" <sojkam1@fel.cvut.cz>,
"Oliver Hartkopp" <oliver.hartkopp@volkswagen.de>,
linux-can@vger.kernel.org,
"Alexander Stein" <alexander.stein@systec-electronic.com>
Subject: [PATCH 06/11] sllin: dlc in cache > 0 is the expected LIN frame length
Date: Mon, 16 Dec 2013 08:54:09 +0100 [thread overview]
Message-ID: <1387180454-1738-7-git-send-email-alexander.stein@systec-electronic.com> (raw)
In-Reply-To: <1387180454-1738-1-git-send-email-alexander.stein@systec-electronic.com>
A cache entry should not be set to LIN_CACHE_RESPONSE if there is nothing
to reply from this node. A dlc set > 0 configures the expected length.
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
---
sllin/sllin.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sllin/sllin.c b/sllin/sllin.c
index 487b72a..c5e1749 100644
--- a/sllin/sllin.c
+++ b/sllin/sllin.c
@@ -768,7 +768,7 @@ static void sllin_slave_receive_buf(struct tty_struct *tty,
sl->lin_state = SLSTATE_ID_RECEIVED;
/* Is the length of data set in frame cache? */
- if (sce->frame_fl & LIN_CACHE_RESPONSE) {
+ if (sce->dlc > 0) {
sl->rx_expect += sce->dlc + 1; /* + checksum */
sl->rx_len_unknown = false;
set_bit(SLF_MSGEVENT, &sl->flags);
--
1.8.3.2
next prev parent reply other threads:[~2013-12-16 7:55 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-10 17:16 [RFC] WIP-patches on sllin Alexander Stein
2013-12-10 17:16 ` [PATCH 1/6] sllin: Replace pr_* with netdev_* where approriate Alexander Stein
2013-12-10 17:16 ` [PATCH 2/6] sllin: Make local functions static Alexander Stein
2013-12-10 17:16 ` [PATCH 3/6] sllin: slave: don't forget to wait for the checksum Alexander Stein
2013-12-10 17:16 ` [PATCH 4/6] sllin: reorder functions Alexander Stein
2013-12-10 17:16 ` [PATCH 5/6] sllin: If length is unknown read until timer occurs or break is received Alexander Stein
2013-12-10 17:16 ` [PATCH 6/6] sllin: Add first support for LIN slave task on slave node Alexander Stein
2013-12-13 1:00 ` [RFC] WIP-patches on sllin Pavel Pisa
2013-12-16 7:46 ` Alexander Stein
2013-12-16 7:54 ` [RFC v2] " Alexander Stein
2013-12-16 7:54 ` [PATCH 01/11] sllin: reorder functions Alexander Stein
2013-12-16 7:54 ` [PATCH 02/11] sllin: If length is unknown read until timer occurs or break is received Alexander Stein
2013-12-16 7:54 ` [PATCH 03/11] sllin: Add first support for LIN slave task on slave node Alexander Stein
2013-12-16 7:54 ` [PATCH 04/11] sllin: Add version dependent access to termios in tty_struct Alexander Stein
2013-12-16 7:54 ` [PATCH 05/11] sllin: Fix checksum mode decision Alexander Stein
2013-12-16 7:54 ` Alexander Stein [this message]
2013-12-16 7:54 ` [PATCH 07/11] sllin: Do not set SLF_MSGEVENT flag Alexander Stein
2013-12-16 7:54 ` [PATCH 08/11] sllin: signal timeout if there are less than configured characters Alexander Stein
2013-12-16 7:54 ` [PATCH 09/11] sllin: Don't fiddle with netdev queue and skb in slave receive mode Alexander Stein
2013-12-16 7:54 ` [PATCH 10/11] sllin: Add LIN ID to timeout frame Alexander Stein
2013-12-16 7:54 ` [PATCH 11/11] sllin: Evaluate message upon break only if received at least a LIN ID Alexander Stein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1387180454-1738-7-git-send-email-alexander.stein@systec-electronic.com \
--to=alexander.stein@systec-electronic.com \
--cc=linux-can@vger.kernel.org \
--cc=lisovy@gmail.com \
--cc=oliver.hartkopp@volkswagen.de \
--cc=pisa@cmp.felk.cvut.cz \
--cc=sojkam1@fel.cvut.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox