From: patchwork-bot+netdevbpf@kernel.org
To: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: netdev@vger.kernel.org, davem@davemloft.net, kuba@kernel.org,
linux-can@vger.kernel.org, kernel@pengutronix.de,
penguin-kernel@I-love.SAKURA.ne.jp, o.rempel@pengutronix.de,
stable@kernel.org
Subject: Re: [PATCH net 01/20] can: j1939: use netdevice_tracker for j1939_{priv,session,ecu} tracking
Date: Thu, 30 Jul 2026 13:20:38 +0000 [thread overview]
Message-ID: <178541763890.3566031.18223366649826424515.git-patchwork-notify@kernel.org> (raw)
In-Reply-To: <20260729102802.505168-2-mkl@pengutronix.de>
Hello:
This series was applied to netdev/net.git (main)
by Marc Kleine-Budde <mkl@pengutronix.de>:
On Wed, 29 Jul 2026 12:12:41 +0200 you wrote:
> From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
>
> syzbot is still reporting
>
> unregister_netdevice: waiting for vcan0 to become free. Usage count = 2
>
> problem. A debug printk() patch in linux-next-20260508 identified that
> there is dev_hold()/dev_put() imbalance in j1939_priv management.
>
> [...]
Here is the summary with links:
- [net,01/20] can: j1939: use netdevice_tracker for j1939_{priv,session,ecu} tracking
https://git.kernel.org/netdev/net/c/d2fb981384b3
- [net,02/20] can: j1939: transport: j1939_session_fresh_new(): initialize receive buffer
https://git.kernel.org/netdev/net/c/eb96c5890792
- [net,03/20] can: isotp: fix timer drain order, wakeup handling and tx_gen ordering
https://git.kernel.org/netdev/net/c/050f010f920d
- [net,04/20] can: isotp: check register_netdevice_notifier() error in module init
https://git.kernel.org/netdev/net/c/ef09a13c5afa
- [net,05/20] can: ctucanfd: unmap BAR0 using base address
https://git.kernel.org/netdev/net/c/a6873910f983
- [net,06/20] can: ctucanfd: mark error-active controller status valid
https://git.kernel.org/netdev/net/c/4e735cbe3aff
- [net,07/20] can: ctucanfd: handle bus error interrupts
https://git.kernel.org/netdev/net/c/e74bae899529
- [net,08/20] can: ctucanfd: use self-test mode for PRESUME_ACK
https://git.kernel.org/netdev/net/c/c31a435933f1
- [net,09/20] can: ctucanfd: add missing MODULE_DEVICE_TABLE()
https://git.kernel.org/netdev/net/c/d937bdb244a7
- [net,10/20] can: peak_usb: add bounds check for USB channel index
https://git.kernel.org/netdev/net/c/39132f166ca8
- [net,11/20] can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error
https://git.kernel.org/netdev/net/c/9b3d5a6d952c
- [net,12/20] can: peak_usb: validate uCAN receive record lengths
https://git.kernel.org/netdev/net/c/93fcab2c6968
- [net,13/20] can: kvaser_usb: kvaser_usb_hydra_get_busparams(): fix memory leak in kvaser_usb_hydra_get_busparams()
https://git.kernel.org/netdev/net/c/941eaf9a6d3b
- [net,14/20] can: kvaser_usb_leaf: kvaser_usb_leaf_wait_cmd(): validate received command extents
https://git.kernel.org/netdev/net/c/0293dd153f9d
- [net,15/20] can: rcar_canfd: change the initializing flow for clocks and resets
https://git.kernel.org/netdev/net/c/bef9004c5b91
- [net,16/20] can: softing: fw_parse(): validate firmware record spans
https://git.kernel.org/netdev/net/c/856d6cb04e54
- [net,17/20] can: c_can: c_can_chip_config(): keep controller in init mode until bittiming is configured
https://git.kernel.org/netdev/net/c/26504844613f
- [net,18/20] can: gs_usb: gs_usb_receive_bulk_callback(): resubmit URB on skb allocation failure
https://git.kernel.org/netdev/net/c/68c5724ecd15
- [net,19/20] can: etas_es58x: es58x_read_bulk_callback(): fix RX buffer leak on URB resubmit failure
https://git.kernel.org/netdev/net/c/7a0cf2b2497c
- [net,20/20] can: ems_usb: validate CPC message lengths
https://git.kernel.org/netdev/net/c/02925f51377f
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
next prev parent reply other threads:[~2026-07-30 13:21 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-29 10:12 [PATCH net 0/20] pull-request: can 2026-07-29 Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 01/20] can: j1939: use netdevice_tracker for j1939_{priv,session,ecu} tracking Marc Kleine-Budde
2026-07-30 10:29 ` sashiko-bot
2026-07-30 13:20 ` patchwork-bot+netdevbpf [this message]
2026-07-29 10:12 ` [PATCH net 02/20] can: j1939: transport: j1939_session_fresh_new(): initialize receive buffer Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 03/20] can: isotp: fix timer drain order, wakeup handling and tx_gen ordering Marc Kleine-Budde
2026-07-30 10:29 ` sashiko-bot
2026-07-30 12:28 ` Oliver Hartkopp
2026-07-29 10:12 ` [PATCH net 04/20] can: isotp: check register_netdevice_notifier() error in module init Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 05/20] can: ctucanfd: unmap BAR0 using base address Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 06/20] can: ctucanfd: mark error-active controller status valid Marc Kleine-Budde
2026-07-30 10:29 ` sashiko-bot
2026-07-30 11:14 ` Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 07/20] can: ctucanfd: handle bus error interrupts Marc Kleine-Budde
2026-07-30 10:29 ` sashiko-bot
2026-07-30 11:18 ` Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 08/20] can: ctucanfd: use self-test mode for PRESUME_ACK Marc Kleine-Budde
2026-07-30 10:29 ` sashiko-bot
2026-07-30 11:25 ` Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 09/20] can: ctucanfd: add missing MODULE_DEVICE_TABLE() Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 10/20] can: peak_usb: add bounds check for USB channel index Marc Kleine-Budde
2026-07-30 10:29 ` sashiko-bot
2026-07-29 10:12 ` [PATCH net 11/20] can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error Marc Kleine-Budde
2026-07-30 10:29 ` sashiko-bot
2026-07-29 10:12 ` [PATCH net 12/20] can: peak_usb: validate uCAN receive record lengths Marc Kleine-Budde
2026-07-30 10:29 ` sashiko-bot
2026-07-29 10:12 ` [PATCH net 13/20] can: kvaser_usb: kvaser_usb_hydra_get_busparams(): fix memory leak in kvaser_usb_hydra_get_busparams() Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 14/20] can: kvaser_usb_leaf: kvaser_usb_leaf_wait_cmd(): validate received command extents Marc Kleine-Budde
2026-07-30 10:29 ` sashiko-bot
2026-07-29 10:12 ` [PATCH net 15/20] can: rcar_canfd: change the initializing flow for clocks and resets Marc Kleine-Budde
2026-07-30 10:29 ` sashiko-bot
2026-07-29 10:12 ` [PATCH net 16/20] can: softing: fw_parse(): validate firmware record spans Marc Kleine-Budde
2026-07-30 10:29 ` sashiko-bot
2026-07-29 10:12 ` [PATCH net 17/20] can: c_can: c_can_chip_config(): keep controller in init mode until bittiming is configured Marc Kleine-Budde
2026-07-30 10:30 ` sashiko-bot
2026-07-29 10:12 ` [PATCH net 18/20] can: gs_usb: gs_usb_receive_bulk_callback(): resubmit URB on skb allocation failure Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 19/20] can: etas_es58x: es58x_read_bulk_callback(): fix RX buffer leak on URB resubmit failure Marc Kleine-Budde
2026-07-29 10:13 ` [PATCH net 20/20] can: ems_usb: validate CPC message lengths Marc Kleine-Budde
2026-07-30 10:30 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=178541763890.3566031.18223366649826424515.git-patchwork-notify@kernel.org \
--to=patchwork-bot+netdevbpf@kernel.org \
--cc=davem@davemloft.net \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=o.rempel@pengutronix.de \
--cc=penguin-kernel@I-love.SAKURA.ne.jp \
--cc=stable@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox