Re: [PATCH v7] can: kvaser_usb: Add support for Kvaser CAN/USB devices

[Olivier Sobrie <olivier@sobrie.be>]

On Thu, Nov 22, 2012 at 12:05:35PM +0100, Marc Kleine-Budde wrote:
> On 11/22/2012 12:04 PM, Marc Kleine-Budde wrote:
> > From: Olivier Sobrie <olivier@sobrie.be>
> > 
> > This driver provides support for several Kvaser CAN/USB devices.
> > Such kind of devices supports up to three CAN network interfaces.
> > 
> > It has been tested with a Kvaser USB Leaf Light (one network interface)
> > connected to a pch_can interface.
> > The firmware version of the Kvaser device was 2.5.205.
> > 
> > List of Kvaser devices supported by the driver:
> >   - Kvaser Leaf Light
> >   - Kvaser Leaf Professional HS
> >   - Kvaser Leaf SemiPro HS
> >   - Kvaser Leaf Professional LS
> >   - Kvaser Leaf Professional SWC
> >   - Kvaser Leaf Professional LIN
> >   - Kvaser Leaf SemiPro LS
> >   - Kvaser Leaf SemiPro SWC
> >   - Kvaser Memorator II HS/HS
> >   - Kvaser USBcan Professional HS/HS
> >   - Kvaser Leaf Light GI
> >   - Kvaser Leaf Professional HS (OBD-II connector)
> >   - Kvaser Memorator Professional HS/LS
> >   - Kvaser Leaf Light "China"
> >   - Kvaser BlackBird SemiPro
> >   - Kvaser USBcan R
> > 
> > Signed-off-by: Daniel Berglund <db@kvaser.com>
> > Signed-off-by: Olivier Sobrie <olivier@sobrie.be>
> > Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> > ---
> > Changes since v6:
> > - added 'const' to kvaser_usb_table and kvaser_usb_bittiming_const
> 
> Olivier, I'm applying this patch to linux-can/next, if you don't have
> any objections.

I don't see any problem :-)
Thanks a lot for the support!

Olivier

> 
> Marc
> 
> -- 
> Pengutronix e.K.                  | Marc Kleine-Budde           |
> Industrial Linux Solutions        | Phone: +49-231-2826-924     |
> Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
> Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |
>