From: Jean Delvare <jdelvare@suse.de>
To: linux-can@vger.kernel.org
Cc: Wolfgang Grandegger <wg@grandegger.com>,
Marc Kleine-Budde <mkl@pengutronix.de>
Subject: [PATCH] can: at91_can: Fix Kconfig dependencies
Date: Tue, 6 May 2014 10:19:15 +0200 [thread overview]
Message-ID: <20140506101915.649e86ce@endymion.delvare> (raw)
The at91_can driver is AT91-specific so it should depend on ARCH_AT91
rather than just ARM. Add COMPILE_TEST as an alternative, so that the
driver can still be build-tested elsewhere.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
---
Note: the COMPILE_TEST might need additional dependencies, I'm not
sure... Builds fine on x86_64.
drivers/net/can/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- linux-3.15-rc4.orig/drivers/net/can/Kconfig 2014-03-31 05:40:15.000000000 +0200
+++ linux-3.15-rc4/drivers/net/can/Kconfig 2014-05-06 09:27:49.552401940 +0200
@@ -65,7 +65,7 @@ config CAN_LEDS
config CAN_AT91
tristate "Atmel AT91 onchip CAN controller"
- depends on ARM
+ depends on ARCH_AT91 || COMPILE_TEST
---help---
This is a driver for the SoC CAN controller in Atmel's AT91SAM9263
and AT91SAM9X5 processors.
--
Jean Delvare
SUSE L3 Support
reply other threads:[~2014-05-06 8:19 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140506101915.649e86ce@endymion.delvare \
--to=jdelvare@suse.de \
--cc=linux-can@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox