Linux CAN drivers development
 help / color / mirror / Atom feed
From: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
To: Jesse James <jjames-V/Cy32gump9BDgjK7y7TUQ@public.gmane.org>
Cc: "linux-can-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
	<linux-can-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	"linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
	<linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: PROBLEM: Attempt to Enable CAN Network with MCP251x SPI Interface Results in Kernel Panics at Boot
Date: Tue, 26 May 2015 12:25:34 -0500	[thread overview]
Message-ID: <20150526172534.GS26599@saruman.tx.rr.com> (raw)
In-Reply-To: <388824CB4174CA41B696BDD3405FBE6459CFEE9C-lm7LCZzvWt/H8pOAoaTGmBpNBvFTKpGeZkel5v8DVj8@public.gmane.org>

[-- Attachment #1: Type: text/plain, Size: 1836 bytes --]

On Tue, May 26, 2015 at 05:21:23PM +0000, Jesse James wrote:
> Hello,
> 
> I recently purchased a A10-OLinuXino-LIME from
> https://www.olimex.com/.  This board uses the Allwinner A10 Cortex-8
> chipset.  Using the kernel from https://github.com/linux-sunxi and
> commit e37d760b363888f3a65cd6455c99a75cac70a7b8, I was able to

this commit is not upstream, you need to ask for support from whoever
maintains linux-sunxi

> successfully build and run kernel 3.4.90+ on the above mentioned

yeah, this kernel is pretty old, you really need to contact linux-sunxi
maintainers.

> board.
> 
> I attempted to enable the CAN Network with the MCP251x SPI interface
> enabled, config file is attached, and now the kernel "panics" at
> boot.  The short hand looks like the following: (Full boot log is
> attached)
> 
> ///////////////////////////////////////////////////////////////////////////////////////////////
> <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [    1.272001] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> <1>Unable to handle kernel paging request at virtual address 71c007b4
> [    1.284403] Unable to handle kernel paging request at virtual address 71c007b4
> <1>pgd = c0004000
> [    1.293294] pgd = c0004000
> <1>[71c007b4] *pgd=00000000[    1.298345] [71c007b4] *pgd=00000000
> 
> <0>Internal error: Oops: 5 [#1] PREEMPT ARM
> [    1.306038] Internal error: Oops: 5 [#1] PREEMPT ARM
> <d>Modules linked in:[    1.312825] Modules linked in:
> 
> CPU: 0    Not tainted  (3.4.90+ #8)
> [    1.319284] CPU: 0    Not tainted  (3.4.90+ #8)
> PC is at sunxi_gpio_request_array.part.4+0xdc/0x4c4

this isn't even a USB bug. Unless you can reproduce this problem with
v4.0 or v4.1-rc5, then there's nothing this forum can do to help you
out, sorry.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

  parent reply	other threads:[~2015-05-26 17:25 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-26 17:21 PROBLEM: Attempt to Enable CAN Network with MCP251x SPI Interface Results in Kernel Panics at Boot Jesse James
     [not found] ` <388824CB4174CA41B696BDD3405FBE6459CFEE9C-lm7LCZzvWt/H8pOAoaTGmBpNBvFTKpGeZkel5v8DVj8@public.gmane.org>
2015-05-26 17:25   ` Felipe Balbi [this message]
2015-05-26 17:41     ` Jesse James
     [not found]       ` <388824CB4174CA41B696BDD3405FBE6459CFEEBE-lm7LCZzvWt/H8pOAoaTGmBpNBvFTKpGeZkel5v8DVj8@public.gmane.org>
2015-05-26 17:52         ` Felipe Balbi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150526172534.GS26599@saruman.tx.rr.com \
    --to=balbi-l0cymroini0@public.gmane.org \
    --cc=jjames-V/Cy32gump9BDgjK7y7TUQ@public.gmane.org \
    --cc=linux-can-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox