[PATCH v2 13/17] dt-bindings: atmel-usart: remove wildcard

Claudiu Beznea
2020-01-10T16:20:44Z

Remove chip whildcard and introduce the list of compatibles instead.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
Documentation/devicetree/bindings/mfd/atmel-usart.txt | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
index 699fd3c9ace8..09013c49f6cc 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
@@ -1,10 +1,11 @@
* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)

Required properties for USART:
-- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu"
- The compatible <chip> indicated will be the first SoC to support an
- additional mode or an USART new feature.
- For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart"
+- compatible: Should be one of the following:
+ - "atmel,at91rm9200-usart"
+ - "atmel,at91sam9260-usart"
+ - "atmel,at91rm9200-dbgu"
+ - "atmel,at91sam9260-dbgu"
- reg: Should contain registers location and length
- interrupts: Should contain interrupt
- clock-names: tuple listing input clock names.
--
2.7.4