Linux CAN drivers development
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: linux-can@vger.kernel.org
Cc: manivannan.sadhasivam@linaro.org,
	dev.kurt@vandijck-laurijssen.be,
	Oleksij Rempel <o.rempel@pengutronix.de>,
	Marc Kleine-Budde <mkl@pengutronix.de>
Subject: [PATCH v41 2/3] dt-binding: can: mcp25xxfd: document device tree bindings
Date: Mon, 22 Jun 2020 13:46:02 +0200	[thread overview]
Message-ID: <20200622114603.965371-3-mkl@pengutronix.de> (raw)
In-Reply-To: <20200622114603.965371-1-mkl@pengutronix.de>

From: Oleksij Rempel <o.rempel@pengutronix.de>

This patch adds the device-tree binding documentation for the Microchip
MCP25xxFD SPI CAN controller family.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 .../bindings/net/can/microchip,mcp25xxfd.yaml | 77 +++++++++++++++++++
 1 file changed, 77 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/can/microchip,mcp25xxfd.yaml

diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp25xxfd.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp25xxfd.yaml
new file mode 100644
index 000000000000..4993dd49181c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp25xxfd.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/microchip,mcp25xxfd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP2517/18FD stand-alone CAN controller device tree bindings
+
+maintainers:
+  - Marc Kleine-Budde <mkl@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: microchip,mcp2517fd
+        description: for MCP2517FD
+      - const: microchip,mcp2518fd
+        description: for MCP2518FD
+      - const: microchip,mcp25xxfd
+        description: to autodetect chip variant
+
+  reg:
+    maxItems: 1
+
+  interrupts-extended:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that powers the CAN controller.
+    maxItems: 1
+
+  xceiver-supply:
+    description: Regulator that powers the CAN transceiver.
+    maxItems: 1
+
+  rx-int-gpios:
+    description:
+      GPIO phandle of GPIO connected to to INT1 pin of the MCP25XXFD, which
+      signals a pending RX interrupt.
+    maxItems: 1
+
+  spi-max-frequency:
+    description:
+      Must be half or less of "clocks" frequency.
+    maximum: 20000000
+
+required:
+  - compatible
+  - reg
+  - interrupts-extended
+  - clocks
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        can@0 {
+            compatible = "microchip,mcp25xxfd";
+            reg = <0>;
+            clocks = <&can0_osc>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&can0_pins>;
+            spi-max-frequency = <20000000>;
+            interrupts-extended = <&gpio 13 IRQ_TYPE_LEVEL_LOW>;
+            rx-int-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&reg5v0>;
+            xceiver-supply = <&reg5v0>;
+        };
+    };
-- 
2.27.0

  parent reply	other threads:[~2020-06-22 11:46 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-22 11:46 [PATCH v41 0/3] can: add mcp25xxfd support Marc Kleine-Budde
2020-06-22 11:46 ` [PATCH v41 1/3] can: rx-offload: can_rx_offload_add_manual(): add new initialization function Marc Kleine-Budde
2020-06-22 11:46 ` Marc Kleine-Budde [this message]
2020-06-22 16:53   ` [PATCH v41 2/3] dt-binding: can: mcp25xxfd: document device tree bindings Manivannan Sadhasivam
2020-06-22 18:12     ` Marc Kleine-Budde
2020-06-23  3:26       ` Manivannan Sadhasivam
2020-06-23  6:02         ` Oleksij Rempel
2020-06-23  6:12           ` Manivannan Sadhasivam
2020-06-23  7:27         ` Marc Kleine-Budde
2020-06-23 12:46 ` [PATCH v41 0/3] can: add mcp25xxfd support Manivannan Sadhasivam
2020-06-23 12:49   ` Marc Kleine-Budde
     [not found] ` <20200622114603.965371-4-mkl@pengutronix.de>
     [not found]   ` <20200626133243.GA8333@Mani-XPS-13-9360>
2020-06-26 14:41     ` [PATCH v41 3/3] can: mcp25xxfd: initial commit Marc Kleine-Budde
2020-07-16 13:28       ` Manivannan Sadhasivam
2020-08-17 15:51         ` Manivannan Sadhasivam
2020-06-27 19:56     ` Kurt Van Dijck
2020-06-28  6:48       ` Manivannan Sadhasivam
2020-08-31 10:10 ` [PATCH v41 0/3] can: add mcp25xxfd support Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200622114603.965371-3-mkl@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=dev.kurt@vandijck-laurijssen.be \
    --cc=linux-can@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=o.rempel@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox