* pull-request: can 2021-03-20
@ 2021-03-20 19:37 Marc Kleine-Budde
2021-03-20 19:37 ` [net 1/2] can: isotp: tx-path: zero initialize outgoing CAN frames Marc Kleine-Budde
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Marc Kleine-Budde @ 2021-03-20 19:37 UTC (permalink / raw)
To: netdev; +Cc: davem, kuba, linux-can, kernel
Hello Jakub, hello David,
this is a pull request of 2 patches for net/master.
The first patch is by Oliver Hartkopp. He fixes the TX-path in the
ISO-TP protocol by properly initializing the outgoing CAN frames.
The second patch is by me and reverts a patch from my previous pull
request which added MODULE_SUPPORTED_DEVICE to the peak_usb driver. In
the mean time in Linus's tree the entirely MODULE_SUPPORTED_DEVICE was
removed. So this reverts the adding of the new MODULE_SUPPORTED_DEVICE
to avoid the merge conflict.
If you prefer to resolve the merge conflict by hand, I'll send a new
pull request without that patch.
regards,
Marc
---
The following changes since commit 5aa3c334a449bab24519c4967f5ac2b3304c8dcf:
selftests: forwarding: vxlan_bridge_1d: Fix vxlan ecn decapsulate value (2021-03-19 13:54:28 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git tags/linux-can-fixes-for-5.12-20210320
for you to fetch changes up to 5d7047ed6b7214fbabc16d8712a822e256b1aa44:
can: peak_usb: Revert "can: peak_usb: add forgotten supported devices" (2021-03-20 20:28:45 +0100)
----------------------------------------------------------------
linux-can-fixes-for-5.12-20210320
----------------------------------------------------------------
Marc Kleine-Budde (1):
can: peak_usb: Revert "can: peak_usb: add forgotten supported devices"
Oliver Hartkopp (1):
can: isotp: tx-path: zero initialize outgoing CAN frames
drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 2 --
net/can/isotp.c | 6 +++---
2 files changed, 3 insertions(+), 5 deletions(-)
^ permalink raw reply [flat|nested] 4+ messages in thread
* [net 1/2] can: isotp: tx-path: zero initialize outgoing CAN frames
2021-03-20 19:37 pull-request: can 2021-03-20 Marc Kleine-Budde
@ 2021-03-20 19:37 ` Marc Kleine-Budde
2021-03-20 19:37 ` [net 2/2] can: peak_usb: Revert "can: peak_usb: add forgotten supported devices" Marc Kleine-Budde
2021-03-21 2:10 ` pull-request: can 2021-03-20 patchwork-bot+netdevbpf
2 siblings, 0 replies; 4+ messages in thread
From: Marc Kleine-Budde @ 2021-03-20 19:37 UTC (permalink / raw)
To: netdev; +Cc: davem, kuba, linux-can, kernel, Oliver Hartkopp,
Marc Kleine-Budde
From: Oliver Hartkopp <socketcan@hartkopp.net>
Commit d4eb538e1f48 ("can: isotp: TX-path: ensure that CAN frame flags are
initialized") ensured the TX flags to be properly set for outgoing CAN
frames.
In fact the root cause of the issue results from a missing initialization
of outgoing CAN frames created by isotp. This is no problem on the CAN bus
as the CAN driver only picks the correctly defined content from the struct
can(fd)_frame. But when the outgoing frames are monitored (e.g. with
candump) we potentially leak some bytes in the unused content of
struct can(fd)_frame.
Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20210319100619.10858-1-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
net/can/isotp.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/net/can/isotp.c b/net/can/isotp.c
index 430976485d95..15ea1234d457 100644
--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -196,7 +196,7 @@ static int isotp_send_fc(struct sock *sk, int ae, u8 flowstatus)
nskb->dev = dev;
can_skb_set_owner(nskb, sk);
ncf = (struct canfd_frame *)nskb->data;
- skb_put(nskb, so->ll.mtu);
+ skb_put_zero(nskb, so->ll.mtu);
/* create & send flow control reply */
ncf->can_id = so->txid;
@@ -779,7 +779,7 @@ static enum hrtimer_restart isotp_tx_timer_handler(struct hrtimer *hrtimer)
can_skb_prv(skb)->skbcnt = 0;
cf = (struct canfd_frame *)skb->data;
- skb_put(skb, so->ll.mtu);
+ skb_put_zero(skb, so->ll.mtu);
/* create consecutive frame */
isotp_fill_dataframe(cf, so, ae, 0);
@@ -895,7 +895,7 @@ static int isotp_sendmsg(struct socket *sock, struct msghdr *msg, size_t size)
so->tx.idx = 0;
cf = (struct canfd_frame *)skb->data;
- skb_put(skb, so->ll.mtu);
+ skb_put_zero(skb, so->ll.mtu);
/* check for single frame transmission depending on TX_DL */
if (size <= so->tx.ll_dl - SF_PCI_SZ4 - ae - off) {
base-commit: 5aa3c334a449bab24519c4967f5ac2b3304c8dcf
--
2.30.2
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [net 2/2] can: peak_usb: Revert "can: peak_usb: add forgotten supported devices"
2021-03-20 19:37 pull-request: can 2021-03-20 Marc Kleine-Budde
2021-03-20 19:37 ` [net 1/2] can: isotp: tx-path: zero initialize outgoing CAN frames Marc Kleine-Budde
@ 2021-03-20 19:37 ` Marc Kleine-Budde
2021-03-21 2:10 ` pull-request: can 2021-03-20 patchwork-bot+netdevbpf
2 siblings, 0 replies; 4+ messages in thread
From: Marc Kleine-Budde @ 2021-03-20 19:37 UTC (permalink / raw)
To: netdev
Cc: davem, kuba, linux-can, kernel, Marc Kleine-Budde,
Leon Romanovsky, Stephane Grosjean
In commit 6417f03132a6 ("module: remove never implemented
MODULE_SUPPORTED_DEVICE") the MODULE_SUPPORTED_DEVICE macro was
removed from the kerne entirely. Shortly before this patch was applied
mainline the commit 59ec7b89ed3e ("can: peak_usb: add forgotten
supported devices") was added to net/master. As this would result in a
merge conflict, let's revert this patch.
Fixes: 59ec7b89ed3e ("can: peak_usb: add forgotten supported devices")
Link: https://lore.kernel.org/r/20210320192649.341832-1-mkl@pengutronix.de
Suggested-by: Leon Romanovsky <leon@kernel.org>
Cc: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
index f1d018218c93..f347ecc79aef 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
@@ -18,8 +18,6 @@
MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB FD adapter");
MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB Pro FD adapter");
-MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-Chip USB");
-MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB X6 adapter");
#define PCAN_USBPROFD_CHANNEL_COUNT 2
#define PCAN_USBFD_CHANNEL_COUNT 1
--
2.30.2
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: pull-request: can 2021-03-20
2021-03-20 19:37 pull-request: can 2021-03-20 Marc Kleine-Budde
2021-03-20 19:37 ` [net 1/2] can: isotp: tx-path: zero initialize outgoing CAN frames Marc Kleine-Budde
2021-03-20 19:37 ` [net 2/2] can: peak_usb: Revert "can: peak_usb: add forgotten supported devices" Marc Kleine-Budde
@ 2021-03-21 2:10 ` patchwork-bot+netdevbpf
2 siblings, 0 replies; 4+ messages in thread
From: patchwork-bot+netdevbpf @ 2021-03-21 2:10 UTC (permalink / raw)
To: Marc Kleine-Budde; +Cc: netdev, davem, kuba, linux-can, kernel
Hello:
This pull request was applied to netdev/net.git (refs/heads/master):
On Sat, 20 Mar 2021 20:37:06 +0100 you wrote:
> Hello Jakub, hello David,
>
> this is a pull request of 2 patches for net/master.
>
> The first patch is by Oliver Hartkopp. He fixes the TX-path in the
> ISO-TP protocol by properly initializing the outgoing CAN frames.
>
> [...]
Here is the summary with links:
- pull-request: can 2021-03-20
https://git.kernel.org/netdev/net/c/49371a8a66ac
- [net,2/2] can: peak_usb: Revert "can: peak_usb: add forgotten supported devices"
https://git.kernel.org/netdev/net/c/5d7047ed6b72
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-03-21 2:12 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-03-20 19:37 pull-request: can 2021-03-20 Marc Kleine-Budde
2021-03-20 19:37 ` [net 1/2] can: isotp: tx-path: zero initialize outgoing CAN frames Marc Kleine-Budde
2021-03-20 19:37 ` [net 2/2] can: peak_usb: Revert "can: peak_usb: add forgotten supported devices" Marc Kleine-Budde
2021-03-21 2:10 ` pull-request: can 2021-03-20 patchwork-bot+netdevbpf
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).