Re: [PATCH v3 7/7] docs: networking: device drivers: can: add flexcan

[Marc Kleine-Budde <mkl@pengutronix.de>]

[-- Attachment #1: Type: text/plain, Size: 1201 bytes --]

On 08.01.2022 14:12:27, Dario Binacchi wrote:
> > +On/off RTR frames reception
> > +===========================
> > +
> > +For most flexcan IP cores the driver supports 2 RX modes:
> > +
> > +- FIFO
> > +- mailbox
> > +
> > +The older flexcan cores (integrated into the i.MX25, i.MX28, i.MX35
> > +and i.MX53 SOCs) only reception of RTR frames if the controller is
> > +configured for RX-FIFO mode.
> 
> only receive RTR frames
> 
> > +
> > +The RX FIFO mode uses a hardware FIFO with a depth of 6 CAN frames,
> > +while the mailbox mode uses a software FIFO with a depth of up to 62
> > +CAN frames. With the help of the bigger buffer, the mailbox mode
> > +performs better under high system load situations.
> > +
> > +As reception of RTR frames is part of the CAN standard, all flexcan
> > +core come up in a mode where RTR reception is possible.
> 
> all flexcan cores

Fixed both.

Thanks,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]