linux-can.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jimmy Assarsson <extja@kvaser.com>
To: linux-can@vger.kernel.org, Anssi Hannula <anssi.hannula@bitwise.fi>
Cc: Jimmy Assarsson <jimmyassarsson@gmail.com>,
	Jimmy Assarsson <extja@kvaser.com>
Subject: [PATCH v2 07/15] can: kvaser_usb_leaf: Set Warning state even without bus errors
Date: Fri,  8 Jul 2022 13:57:01 +0200	[thread overview]
Message-ID: <20220708115709.232815-8-extja@kvaser.com> (raw)
In-Reply-To: <20220708115709.232815-1-extja@kvaser.com>

From: Anssi Hannula <anssi.hannula@bitwise.fi>

kvaser_usb_leaf_rx_error_update_can_state() sets error state according
to error counters when the hardware does not indicate a specific state
directly.

However, this is currently gated behind a check for
M16C_STATE_BUS_ERROR which does not always seem to be set when error
counters are increasing, and may not be set when error counters are
decreasing.

This causes the CAN_STATE_ERROR_WARNING state to not be set in some
cases even when appropriate.

Change the code to set error state from counters even without
M16C_STATE_BUS_ERROR.

The Error-Passive case seems superfluous as it is already set via
M16C_STATE_BUS_PASSIVE flag above, but it is kept for now.

Tested with 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778.

Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
---
Changes in v2:
  - Rebased on b3b6df2c56d8 ("can: kvaser_usb: kvaser_usb_leaf: fix bittiming limits")

 .../net/can/usb/kvaser_usb/kvaser_usb_leaf.c  | 20 ++++++++-----------
 1 file changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
index 6488eae7f00c..8f9e2707998d 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
@@ -961,20 +961,16 @@ kvaser_usb_leaf_rx_error_update_can_state(struct kvaser_usb_net_priv *priv,
 		new_state = CAN_STATE_BUS_OFF;
 	} else if (es->status & M16C_STATE_BUS_PASSIVE) {
 		new_state = CAN_STATE_ERROR_PASSIVE;
-	} else if (es->status & M16C_STATE_BUS_ERROR) {
+	} else if ((es->status & M16C_STATE_BUS_ERROR) &&
+		   cur_state >= CAN_STATE_BUS_OFF) {
 		/* Guard against spurious error events after a busoff */
-		if (cur_state < CAN_STATE_BUS_OFF) {
-			if (es->txerr >= 128 || es->rxerr >= 128)
-				new_state = CAN_STATE_ERROR_PASSIVE;
-			else if (es->txerr >= 96 || es->rxerr >= 96)
-				new_state = CAN_STATE_ERROR_WARNING;
-			else if (cur_state > CAN_STATE_ERROR_ACTIVE)
-				new_state = CAN_STATE_ERROR_ACTIVE;
-		}
-	}
-
-	if (!es->status)
+	} else if (es->txerr >= 128 || es->rxerr >= 128) {
+		new_state = CAN_STATE_ERROR_PASSIVE;
+	} else if (es->txerr >= 96 || es->rxerr >= 96) {
+		new_state = CAN_STATE_ERROR_WARNING;
+	} else {
 		new_state = CAN_STATE_ERROR_ACTIVE;
+	}
 
 	if (new_state != cur_state) {
 		tx_state = (es->txerr >= es->rxerr) ? new_state : 0;
-- 
2.36.1


  parent reply	other threads:[~2022-07-08 11:57 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-08 11:56 [PATCH v2 00/15] can: kvaser_usb: Various fixes Jimmy Assarsson
2022-07-08 11:56 ` [PATCH v2 01/15] can: kvaser_usb_leaf: Fix overread with an invalid command Jimmy Assarsson
2022-07-08 11:56 ` [PATCH v2 02/15] can: kvaser_usb: Fix use of uninitialized completion Jimmy Assarsson
2022-07-08 11:56 ` [PATCH v2 03/15] can: kvaser_usb: Fix possible completions during init_completion Jimmy Assarsson
2022-07-08 11:56 ` [PATCH v2 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device Jimmy Assarsson
2022-08-12 15:44   ` Anssi Hannula
2022-08-18 18:33     ` Jimmy Assarsson
2022-09-01 12:34       ` Jimmy Assarsson
2022-07-08 11:56 ` [PATCH v2 05/15] can: kvaser_usb: kvaser_usb_leaf: Rename {leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event Jimmy Assarsson
2022-07-08 11:57 ` [PATCH v2 06/15] can: kvaser_usb: kvaser_usb_leaf: Handle CMD_ERROR_EVENT Jimmy Assarsson
2022-07-08 11:57 ` Jimmy Assarsson [this message]
2022-07-08 11:57 ` [PATCH v2 08/15] can: kvaser_usb_leaf: Fix TX queue out of sync after restart Jimmy Assarsson
2022-07-08 11:57 ` [PATCH v2 09/15] can: kvaser_usb_leaf: Fix CAN state " Jimmy Assarsson
2022-07-08 11:57 ` [PATCH v2 10/15] can: kvaser_usb_leaf: Fix improved state not being reported Jimmy Assarsson
2022-07-08 11:57 ` [PATCH v2 11/15] can: kvaser_usb_leaf: Fix wrong CAN state after stopping Jimmy Assarsson
2022-07-08 11:57 ` [PATCH v2 12/15] can: kvaser_usb_leaf: Ignore stale bus-off after start Jimmy Assarsson
2022-07-08 11:57 ` [PATCH v2 13/15] can: kvaser_usb_leaf: Fix bogus restart events Jimmy Assarsson
2022-07-08 11:57 ` [PATCH v2 14/15] can: kvaser_usb: Add struct kvaser_usb_busparams Jimmy Assarsson
2022-07-08 11:57 ` [PATCH v2 15/15] can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming Jimmy Assarsson
2022-07-19 18:40 ` [PATCH v2 00/15] can: kvaser_usb: Various fixes Marc Kleine-Budde
2022-07-19 18:59   ` Jimmy Assarsson
2022-08-16 14:50     ` Marc Kleine-Budde
2022-08-18 18:35       ` Jimmy Assarsson
2022-08-12 15:44 ` Anssi Hannula

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220708115709.232815-8-extja@kvaser.com \
    --to=extja@kvaser.com \
    --cc=anssi.hannula@bitwise.fi \
    --cc=jimmyassarsson@gmail.com \
    --cc=linux-can@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).