Linux CAN drivers development
 help / color / mirror / Atom feed
From: Oliver Hartkopp <socketcan@hartkopp.net>
To: linux-can@vger.kernel.org
Cc: Oliver Hartkopp <socketcan@hartkopp.net>,
	Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Subject: [PATCH v9 6/7] can: dev: add CAN XL support to virtual CAN
Date: Mon, 12 Sep 2022 19:07:24 +0200	[thread overview]
Message-ID: <20220912170725.120748-7-socketcan@hartkopp.net> (raw)
In-Reply-To: <20220912170725.120748-1-socketcan@hartkopp.net>

Make use of new can_skb_get_data_len() helper.
Add support for variable CANXL MTU using the new can_is_canxl_dev_mtu().

Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
---
 drivers/net/can/vcan.c  | 12 ++++++------
 drivers/net/can/vxcan.c |  8 ++++----
 include/linux/can/dev.h |  5 +++++
 3 files changed, 15 insertions(+), 10 deletions(-)

diff --git a/drivers/net/can/vcan.c b/drivers/net/can/vcan.c
index 36b6310a2e5b..285635c23443 100644
--- a/drivers/net/can/vcan.c
+++ b/drivers/net/can/vcan.c
@@ -69,33 +69,32 @@ static bool echo; /* echo testing. Default: 0 (Off) */
 module_param(echo, bool, 0444);
 MODULE_PARM_DESC(echo, "Echo sent frames (for testing). Default: 0 (Off)");
 
 static void vcan_rx(struct sk_buff *skb, struct net_device *dev)
 {
-	struct canfd_frame *cfd = (struct canfd_frame *)skb->data;
 	struct net_device_stats *stats = &dev->stats;
 
 	stats->rx_packets++;
-	stats->rx_bytes += cfd->len;
+	stats->rx_bytes += can_skb_get_data_len(skb);
 
 	skb->pkt_type  = PACKET_BROADCAST;
 	skb->dev       = dev;
 	skb->ip_summed = CHECKSUM_UNNECESSARY;
 
 	netif_rx(skb);
 }
 
 static netdev_tx_t vcan_tx(struct sk_buff *skb, struct net_device *dev)
 {
-	struct canfd_frame *cfd = (struct canfd_frame *)skb->data;
 	struct net_device_stats *stats = &dev->stats;
-	int loop, len;
+	unsigned int len;
+	int loop;
 
 	if (can_dropped_invalid_skb(dev, skb))
 		return NETDEV_TX_OK;
 
-	len = cfd->can_id & CAN_RTR_FLAG ? 0 : cfd->len;
+	len = can_skb_get_data_len(skb);
 	stats->tx_packets++;
 	stats->tx_bytes += len;
 
 	/* set flag whether this packet has to be looped back */
 	loop = skb->pkt_type == PACKET_LOOPBACK;
@@ -135,11 +134,12 @@ static int vcan_change_mtu(struct net_device *dev, int new_mtu)
 {
 	/* Do not allow changing the MTU while running */
 	if (dev->flags & IFF_UP)
 		return -EBUSY;
 
-	if (new_mtu != CAN_MTU && new_mtu != CANFD_MTU)
+	if (new_mtu != CAN_MTU && new_mtu != CANFD_MTU &&
+	    !can_is_canxl_dev_mtu(new_mtu))
 		return -EINVAL;
 
 	dev->mtu = new_mtu;
 	return 0;
 }
diff --git a/drivers/net/can/vxcan.c b/drivers/net/can/vxcan.c
index cffd107d8b28..26a472d2ea58 100644
--- a/drivers/net/can/vxcan.c
+++ b/drivers/net/can/vxcan.c
@@ -36,14 +36,13 @@ struct vxcan_priv {
 
 static netdev_tx_t vxcan_xmit(struct sk_buff *oskb, struct net_device *dev)
 {
 	struct vxcan_priv *priv = netdev_priv(dev);
 	struct net_device *peer;
-	struct canfd_frame *cfd = (struct canfd_frame *)oskb->data;
 	struct net_device_stats *peerstats, *srcstats = &dev->stats;
 	struct sk_buff *skb;
-	u8 len;
+	unsigned int len;
 
 	if (can_dropped_invalid_skb(dev, oskb))
 		return NETDEV_TX_OK;
 
 	rcu_read_lock();
@@ -68,11 +67,11 @@ static netdev_tx_t vxcan_xmit(struct sk_buff *oskb, struct net_device *dev)
 	skb->csum_start = 0;
 	skb->pkt_type   = PACKET_BROADCAST;
 	skb->dev        = peer;
 	skb->ip_summed  = CHECKSUM_UNNECESSARY;
 
-	len = cfd->can_id & CAN_RTR_FLAG ? 0 : cfd->len;
+	len = can_skb_get_data_len(skb);
 	if (netif_rx(skb) == NET_RX_SUCCESS) {
 		srcstats->tx_packets++;
 		srcstats->tx_bytes += len;
 		peerstats = &peer->stats;
 		peerstats->rx_packets++;
@@ -130,11 +129,12 @@ static int vxcan_change_mtu(struct net_device *dev, int new_mtu)
 {
 	/* Do not allow changing the MTU while running */
 	if (dev->flags & IFF_UP)
 		return -EBUSY;
 
-	if (new_mtu != CAN_MTU && new_mtu != CANFD_MTU)
+	if (new_mtu != CAN_MTU && new_mtu != CANFD_MTU &&
+	    !can_is_canxl_dev_mtu(new_mtu))
 		return -EINVAL;
 
 	dev->mtu = new_mtu;
 	return 0;
 }
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index c3e50e537e39..58f5431a5559 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -145,10 +145,15 @@ static inline int __must_check can_set_static_ctrlmode(struct net_device *dev,
 static inline u32 can_get_static_ctrlmode(struct can_priv *priv)
 {
 	return priv->ctrlmode & ~priv->ctrlmode_supported;
 }
 
+static inline bool can_is_canxl_dev_mtu(unsigned int mtu)
+{
+	return (mtu >= CANXL_MIN_MTU && mtu <= CANXL_MAX_MTU);
+}
+
 void can_setup(struct net_device *dev);
 
 struct net_device *alloc_candev_mqs(int sizeof_priv, unsigned int echo_skb_max,
 				    unsigned int txqs, unsigned int rxqs);
 #define alloc_candev(sizeof_priv, echo_skb_max) \
-- 
2.30.2


  parent reply	other threads:[~2022-09-12 17:07 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-12 17:07 [PATCH v9 0/7] can: support CAN XL Oliver Hartkopp
2022-09-12 17:07 ` [PATCH v9 1/7] can: skb: unify skb CAN frame identification helpers Oliver Hartkopp
2022-09-12 17:07 ` [PATCH v9 2/7] can: skb: add skb CAN frame data length helpers Oliver Hartkopp
2022-09-12 17:07 ` [PATCH v9 3/7] can: set CANFD_FDF flag in all CAN FD frame structures Oliver Hartkopp
2022-09-12 17:07 ` [PATCH v9 4/7] can: canxl: introduce CAN XL data structure Oliver Hartkopp
2022-09-12 17:07 ` [PATCH v9 5/7] can: canxl: update CAN infrastructure for CAN XL frames Oliver Hartkopp
2022-09-12 17:07 ` Oliver Hartkopp [this message]
2022-09-12 17:07 ` [PATCH v9 7/7] can: raw: add CAN XL support Oliver Hartkopp
2022-09-15  5:13 ` [PATCH v9 0/7] can: support CAN XL Oliver Hartkopp
2022-09-15  8:21   ` Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220912170725.120748-7-socketcan@hartkopp.net \
    --to=socketcan@hartkopp.net \
    --cc=linux-can@vger.kernel.org \
    --cc=mailhol.vincent@wanadoo.fr \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox