Linux CAN drivers development
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kuba@kernel.org, linux-can@vger.kernel.org,
	kernel@pengutronix.de, Marc Kleine-Budde <mkl@pengutronix.de>,
	Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Subject: [PATCH net 3/3] can: gs_usb: gs_usb_set_phys_id(): return with error if identify is not supported
Date: Wed, 21 Sep 2022 10:36:09 +0200	[thread overview]
Message-ID: <20220921083609.419768-4-mkl@pengutronix.de> (raw)
In-Reply-To: <20220921083609.419768-1-mkl@pengutronix.de>

Until commit 409c188c57cd ("can: tree-wide: advertise software
timestamping capabilities") the ethtool_ops was only assigned for
devices which support the GS_CAN_FEATURE_IDENTIFY feature. That commit
assigns ethtool_ops unconditionally.

This results on controllers without GS_CAN_FEATURE_IDENTIFY support
for the following ethtool error:

| $ ethtool -p can0 1
| Cannot identify NIC: Broken pipe

Restore the correct error value by checking for
GS_CAN_FEATURE_IDENTIFY in the gs_usb_set_phys_id() function.

| $ ethtool -p can0 1
| Cannot identify NIC: Operation not supported

While there use the variable "netdev" for the "struct net_device"
pointer and "dev" for the "struct gs_can" pointer as in the rest of
the driver.

Fixes: 409c188c57cd ("can: tree-wide: advertise software timestamping capabilities")
Link: http://lore.kernel.org/all/20220818143853.2671854-1-mkl@pengutronix.de
Cc: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/usb/gs_usb.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c
index 553e2c7b0b12..c1ff3c046d62 100644
--- a/drivers/net/can/usb/gs_usb.c
+++ b/drivers/net/can/usb/gs_usb.c
@@ -925,17 +925,21 @@ static int gs_usb_set_identify(struct net_device *netdev, bool do_identify)
 }
 
 /* blink LED's for finding the this interface */
-static int gs_usb_set_phys_id(struct net_device *dev,
+static int gs_usb_set_phys_id(struct net_device *netdev,
 			      enum ethtool_phys_id_state state)
 {
+	const struct gs_can *dev = netdev_priv(netdev);
 	int rc = 0;
 
+	if (!(dev->feature & GS_CAN_FEATURE_IDENTIFY))
+		return -EOPNOTSUPP;
+
 	switch (state) {
 	case ETHTOOL_ID_ACTIVE:
-		rc = gs_usb_set_identify(dev, GS_CAN_IDENTIFY_ON);
+		rc = gs_usb_set_identify(netdev, GS_CAN_IDENTIFY_ON);
 		break;
 	case ETHTOOL_ID_INACTIVE:
-		rc = gs_usb_set_identify(dev, GS_CAN_IDENTIFY_OFF);
+		rc = gs_usb_set_identify(netdev, GS_CAN_IDENTIFY_OFF);
 		break;
 	default:
 		break;
@@ -1072,9 +1076,10 @@ static struct gs_can *gs_make_candev(unsigned int channel,
 		dev->feature |= GS_CAN_FEATURE_REQ_USB_QUIRK_LPC546XX |
 			GS_CAN_FEATURE_QUIRK_BREQ_CANTACT_PRO;
 
-	if (le32_to_cpu(dconf->sw_version) > 1)
-		if (feature & GS_CAN_FEATURE_IDENTIFY)
-			netdev->ethtool_ops = &gs_usb_ethtool_ops;
+	/* GS_CAN_FEATURE_IDENTIFY is only supported for sw_version > 1 */
+	if (!(le32_to_cpu(dconf->sw_version) > 1 &&
+	      feature & GS_CAN_FEATURE_IDENTIFY))
+		dev->feature &= ~GS_CAN_FEATURE_IDENTIFY;
 
 	kfree(bt_const);
 
-- 
2.35.1



      parent reply	other threads:[~2022-09-21  8:36 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-21  8:36 [PATCH net 0/3] pull-request: can 2022-09-21 Marc Kleine-Budde
2022-09-21  8:36 ` [PATCH net 1/3] can: flexcan: flexcan_mailbox_read() fix return value for drop = true Marc Kleine-Budde
2022-09-21 14:20   ` patchwork-bot+netdevbpf
2022-09-21  8:36 ` [PATCH net 2/3] can: gs_usb: gs_can_open(): fix race dev->can.state condition Marc Kleine-Budde
2022-09-22  8:04   ` Matthieu Baerts
2022-09-22  8:23     ` Marc Kleine-Budde
2022-09-22 20:05       ` Jakub Kicinski
2022-09-23  9:24         ` Matthieu Baerts
2022-09-21  8:36 ` Marc Kleine-Budde [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220921083609.419768-4-mkl@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=davem@davemloft.net \
    --cc=kernel@pengutronix.de \
    --cc=kuba@kernel.org \
    --cc=linux-can@vger.kernel.org \
    --cc=mailhol.vincent@wanadoo.fr \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox