[PATCH v2 08/12] can: hi311x: fix {rx,tx}_errors statistics

[Dario Binacchi <dario.binacchi@amarulasolutions.com>]

The hi3110_can_ist() function was incorrectly incrementing only the
receive error counter, even in cases of bit or acknowledgment errors that
occur during transmission. The patch fixes the issue by incrementing the
appropriate counter based on the type of error.

Fixes: 57e83fb9b746 ("can: hi311x: Add Holt HI-311x CAN driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

---

Changes in v2:
- Update statistics even if skb allocation fails

 drivers/net/can/spi/hi311x.c | 47 ++++++++++++++++++++++--------------
 1 file changed, 29 insertions(+), 18 deletions(-)

diff --git a/drivers/net/can/spi/hi311x.c b/drivers/net/can/spi/hi311x.c
index 25d9b32f5701..09ae218315d7 100644
--- a/drivers/net/can/spi/hi311x.c
+++ b/drivers/net/can/spi/hi311x.c
@@ -696,27 +696,38 @@ static irqreturn_t hi3110_can_ist(int irq, void *dev_id)
 			/* Check for protocol errors */
 			if (eflag & HI3110_ERR_PROTOCOL_MASK) {
 				skb = alloc_can_err_skb(net, &cf);
-				if (!skb)
-					break;
+				if (skb)
+					cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
 
-				cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
 				priv->can.can_stats.bus_error++;
-				priv->net->stats.rx_errors++;
-				if (eflag & HI3110_ERR_BITERR)
-					cf->data[2] |= CAN_ERR_PROT_BIT;
-				else if (eflag & HI3110_ERR_FRMERR)
-					cf->data[2] |= CAN_ERR_PROT_FORM;
-				else if (eflag & HI3110_ERR_STUFERR)
-					cf->data[2] |= CAN_ERR_PROT_STUFF;
-				else if (eflag & HI3110_ERR_CRCERR)
-					cf->data[3] |= CAN_ERR_PROT_LOC_CRC_SEQ;
-				else if (eflag & HI3110_ERR_ACKERR)
-					cf->data[3] |= CAN_ERR_PROT_LOC_ACK;
-
-				cf->data[6] = hi3110_read(spi, HI3110_READ_TEC);
-				cf->data[7] = hi3110_read(spi, HI3110_READ_REC);
+				if (eflag & HI3110_ERR_BITERR) {
+					priv->net->stats.tx_errors++;
+					if (skb)
+						cf->data[2] |= CAN_ERR_PROT_BIT;
+				} else if (eflag & HI3110_ERR_FRMERR) {
+					priv->net->stats.rx_errors++;
+					if (skb)
+						cf->data[2] |= CAN_ERR_PROT_FORM;
+				} else if (eflag & HI3110_ERR_STUFERR) {
+					priv->net->stats.rx_errors++;
+					if (skb)
+						cf->data[2] |= CAN_ERR_PROT_STUFF;
+				} else if (eflag & HI3110_ERR_CRCERR) {
+					priv->net->stats.rx_errors++;
+					if (skb)
+						cf->data[3] |= CAN_ERR_PROT_LOC_CRC_SEQ;
+				} else if (eflag & HI3110_ERR_ACKERR) {
+					priv->net->stats.tx_errors++;
+					if (skb)
+						cf->data[3] |= CAN_ERR_PROT_LOC_ACK;
+				}
+
 				netdev_dbg(priv->net, "Bus Error\n");
-				netif_rx(skb);
+				if (skb) {
+					cf->data[6] = hi3110_read(spi, HI3110_READ_TEC);
+					cf->data[7] = hi3110_read(spi, HI3110_READ_REC);
+					netif_rx(skb);
+				}
 			}
 		}
 
-- 
2.43.0