[PATCH v2 00/10] can: kvaser_pciefd: Simplify identification of physical CAN interfaces

[Jimmy Assarsson <extja@kvaser.com>]

This patch series simplifies the process of identifying which network
interface (can0..canX) corresponds to which physical CAN channel on
Kvaser PCIe based CAN interfaces.

Changes in v2:
  - Replace use of netdev.dev_id with netdev.dev_port
  - Formatting and refactoring
  - New patch with devlink documentation

Jimmy Assarsson (10):
  can: kvaser_pciefd: Add support to control CAN LEDs on device
  can: kvaser_pciefd: Add support for ethtool set_phys_id()
  can: kvaser_pciefd: Add intermediate variable for device struct in
    probe()
  can: kvaser_pciefd: Store the different firmware version components in
    a struct
  can: kvaser_pciefd: Store device channel index
  can: kvaser_pciefd: Split driver into C-file and header-file.
  can: kvaser_pciefd: Add devlink support
  can: kvaser_pciefd: Expose device firmware version via devlink
    info_get()
  can: kvaser_pciefd: Add devlink port support
  Documentation: devlink: add devlink documentation for the
    kvaser_pciefd driver

 Documentation/networking/devlink/index.rst    |   1 +
 .../networking/devlink/kvaser_pciefd.rst      |  24 +++
 drivers/net/can/Kconfig                       |   1 +
 drivers/net/can/Makefile                      |   2 +-
 drivers/net/can/kvaser_pciefd/Makefile        |   3 +
 drivers/net/can/kvaser_pciefd/kvaser_pciefd.h |  96 ++++++++++++
 .../kvaser_pciefd_core.c}                     | 144 +++++++++---------
 .../can/kvaser_pciefd/kvaser_pciefd_devlink.c |  61 ++++++++
 8 files changed, 258 insertions(+), 74 deletions(-)
 create mode 100644 Documentation/networking/devlink/kvaser_pciefd.rst
 create mode 100644 drivers/net/can/kvaser_pciefd/Makefile
 create mode 100644 drivers/net/can/kvaser_pciefd/kvaser_pciefd.h
 rename drivers/net/can/{kvaser_pciefd.c => kvaser_pciefd/kvaser_pciefd_core.c} (96%)
 create mode 100644 drivers/net/can/kvaser_pciefd/kvaser_pciefd_devlink.c

-- 
2.49.0