[PATCH v2 00/11] can: kvaser_usb: Simplify identification of physical CAN interfaces

[Jimmy Assarsson <extja@kvaser.com>]

This patch series simplifies the process of identifying which network
interface (can0..canX) corresponds to which physical CAN channel on
Kvaser USB based CAN interfaces.

Changes in v2:
  - New patch with devlink documentation
  - New patch assigning netdev.dev_port
  - Formatting and refactoring

Jimmy Assarsson (11):
  can: kvaser_usb: Add support to control CAN LEDs on device
  can: kvaser_usb: Add support for ethtool set_phys_id()
  can: kvaser_usb: Assign netdev.dev_port based on device channel index
  can: kvaser_usb: Add intermediate variables
  can: kvaser_usb: Move comment regarding max_tx_urbs
  can: kvaser_usb: Store the different firmware version components in a
    struct
  can: kvaser_usb: Store additional device information
  can: kvaser_usb: Add devlink support
  can: kvaser_usb: Expose device information via devlink info_get()
  can: kvaser_usb: Add devlink port support
  Documentation: devlink: add devlink documentation for the kvaser_usb
    driver

 Documentation/networking/devlink/index.rst    |   1 +
 .../networking/devlink/kvaser_usb.rst         |  33 +++++
 drivers/net/can/usb/Kconfig                   |   1 +
 drivers/net/can/usb/kvaser_usb/Makefile       |   2 +-
 drivers/net/can/usb/kvaser_usb/kvaser_usb.h   |  33 ++++-
 .../net/can/usb/kvaser_usb/kvaser_usb_core.c  | 139 +++++++++++++-----
 .../can/usb/kvaser_usb/kvaser_usb_devlink.c   |  88 +++++++++++
 .../net/can/usb/kvaser_usb/kvaser_usb_hydra.c |  63 +++++++-
 .../net/can/usb/kvaser_usb/kvaser_usb_leaf.c  |  75 +++++++++-
 9 files changed, 387 insertions(+), 48 deletions(-)
 create mode 100644 Documentation/networking/devlink/kvaser_usb.rst
 create mode 100644 drivers/net/can/usb/kvaser_usb/kvaser_usb_devlink.c

-- 
2.49.0