From: Jimmy Assarsson <extja@kvaser.com>
To: linux-can@vger.kernel.org
Cc: Jimmy Assarsson <jimmyassarsson@gmail.com>,
Marc Kleine-Budde <mkl@pengutronix.de>,
Vincent Mailhol <mailhol.vincent@wanadoo.fr>,
netdev@vger.kernel.org
Subject: [PATCH v2 09/11] can: kvaser_usb: Expose device information via devlink info_get()
Date: Thu, 24 Jul 2025 11:25:03 +0200 [thread overview]
Message-ID: <20250724092505.8-10-extja@kvaser.com> (raw)
In-Reply-To: <20250724092505.8-1-extja@kvaser.com>
Expose device information via devlink info_get():
* Serial number
* Firmware version
* Hardware revision
* EAN (product number)
Example output:
$ devlink dev
usb/1-1.2:1.0
$ devlink dev info
usb/1-1.2:1.0:
driver kvaser_usb
serial_number 1020
versions:
fixed:
board.rev 1
board.id 7330130009653
running:
fw 3.22.527
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
---
Changes in v2:
- Add two space indentation to terminal output.
Suggested by Vincent Mailhol [1]
[1] https://lore.kernel.org/linux-can/20250723083236.9-1-extja@kvaser.com/T/#m31ee4aad13ee29d5559b56fdce842609ae4f67c5
.../can/usb/kvaser_usb/kvaser_usb_devlink.c | 53 +++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_devlink.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_devlink.c
index 9a3a8966a0a1..3568485a3e84 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_devlink.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_devlink.c
@@ -6,5 +6,58 @@
#include <net/devlink.h>
+#include "kvaser_usb.h"
+
+#define KVASER_USB_EAN_MSB 0x00073301
+
+static int kvaser_usb_devlink_info_get(struct devlink *devlink,
+ struct devlink_info_req *req,
+ struct netlink_ext_ack *extack)
+{
+ struct kvaser_usb *dev = devlink_priv(devlink);
+ char buf[] = "73301XXXXXXXXXX";
+ int ret;
+
+ if (dev->serial_number) {
+ snprintf(buf, sizeof(buf), "%u", dev->serial_number);
+ ret = devlink_info_serial_number_put(req, buf);
+ if (ret)
+ return ret;
+ }
+
+ if (dev->fw_version.major) {
+ snprintf(buf, sizeof(buf), "%u.%u.%u",
+ dev->fw_version.major,
+ dev->fw_version.minor,
+ dev->fw_version.build);
+ ret = devlink_info_version_running_put(req,
+ DEVLINK_INFO_VERSION_GENERIC_FW,
+ buf);
+ if (ret)
+ return ret;
+ }
+
+ if (dev->hw_revision) {
+ snprintf(buf, sizeof(buf), "%u", dev->hw_revision);
+ ret = devlink_info_version_fixed_put(req,
+ DEVLINK_INFO_VERSION_GENERIC_BOARD_REV,
+ buf);
+ if (ret)
+ return ret;
+ }
+
+ if (dev->ean[1] == KVASER_USB_EAN_MSB) {
+ snprintf(buf, sizeof(buf), "%x%08x", dev->ean[1], dev->ean[0]);
+ ret = devlink_info_version_fixed_put(req,
+ DEVLINK_INFO_VERSION_GENERIC_BOARD_ID,
+ buf);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
const struct devlink_ops kvaser_usb_devlink_ops = {
+ .info_get = kvaser_usb_devlink_info_get,
};
--
2.49.0
next prev parent reply other threads:[~2025-07-24 9:25 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-24 9:24 [PATCH v2 00/11] can: kvaser_usb: Simplify identification of physical CAN interfaces Jimmy Assarsson
2025-07-24 9:24 ` [PATCH v2 01/11] can: kvaser_usb: Add support to control CAN LEDs on device Jimmy Assarsson
2025-07-24 18:26 ` Simon Horman
2025-07-25 12:44 ` Jimmy Assarsson
2025-07-26 19:48 ` Simon Horman
2025-07-24 9:24 ` [PATCH v2 02/11] can: kvaser_usb: Add support for ethtool set_phys_id() Jimmy Assarsson
2025-07-24 9:24 ` [PATCH v2 03/11] can: kvaser_usb: Assign netdev.dev_port based on device channel index Jimmy Assarsson
2025-07-24 9:24 ` [PATCH v2 04/11] can: kvaser_usb: Add intermediate variables Jimmy Assarsson
2025-07-24 9:24 ` [PATCH v2 05/11] can: kvaser_usb: Move comment regarding max_tx_urbs Jimmy Assarsson
2025-07-24 9:25 ` [PATCH v2 06/11] can: kvaser_usb: Store the different firmware version components in a struct Jimmy Assarsson
2025-07-24 9:25 ` [PATCH v2 07/11] can: kvaser_usb: Store additional device information Jimmy Assarsson
2025-07-24 9:25 ` [PATCH v2 08/11] can: kvaser_usb: Add devlink support Jimmy Assarsson
2025-07-24 9:25 ` Jimmy Assarsson [this message]
2025-07-25 3:23 ` [PATCH v2 09/11] can: kvaser_usb: Expose device information via devlink info_get() Vincent Mailhol
2025-07-24 9:25 ` [PATCH v2 10/11] can: kvaser_usb: Add devlink port support Jimmy Assarsson
2025-07-24 9:25 ` [PATCH v2 11/11] Documentation: devlink: add devlink documentation for the kvaser_usb driver Jimmy Assarsson
2025-07-25 3:27 ` Vincent Mailhol
2025-07-25 3:29 ` [PATCH v2 00/11] can: kvaser_usb: Simplify identification of physical CAN interfaces Vincent Mailhol
2025-07-25 12:45 ` Jimmy Assarsson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250724092505.8-10-extja@kvaser.com \
--to=extja@kvaser.com \
--cc=jimmyassarsson@gmail.com \
--cc=linux-can@vger.kernel.org \
--cc=mailhol.vincent@wanadoo.fr \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox