public inbox for linux-can@vger.kernel.org
 help / color / mirror / Atom feed
From: Jimmy Assarsson <extja@kvaser.com>
To: linux-can@vger.kernel.org
Cc: Jimmy Assarsson <jimmyassarsson@gmail.com>,
	Marc Kleine-Budde <mkl@pengutronix.de>,
	Vincent Mailhol <mailhol.vincent@wanadoo.fr>,
	Simon Horman <horms@kernel.org>,
	netdev@vger.kernel.org
Subject: [PATCH v3 10/11] can: kvaser_usb: Add devlink port support
Date: Fri, 25 Jul 2025 14:34:51 +0200	[thread overview]
Message-ID: <20250725123452.41-11-extja@kvaser.com> (raw)
In-Reply-To: <20250725123452.41-1-extja@kvaser.com>

Register each CAN channel of the device as an devlink physical port.
This makes it easier to get device information for a given network
interface (i.e. can2).

Example output:
  $ devlink dev
  usb/1-1.3:1.0

  $ devlink port
  usb/1-1.3:1.0/0: type eth netdev can0 flavour physical port 0 splittable false
  usb/1-1.3:1.0/1: type eth netdev can1 flavour physical port 1 splittable false

  $ devlink port show can1
  usb/1-1.3:1.0/1: type eth netdev can1 flavour physical port 0 splittable false

  $ devlink dev info
  usb/1-1.3:1.0:
    driver kvaser_usb
    serial_number 1020
    versions:
        fixed:
          board.rev 1
          board.id 7330130009653
        running:
          fw 3.22.527

  $ ethtool -i can1
  driver: kvaser_usb
  version: 6.12.10-arch1-1
  firmware-version: 3.22.527
  expansion-rom-version:
  bus-info: 1-1.3:1.0
  supports-statistics: no
  supports-test: no
  supports-eeprom-access: no
  supports-register-dump: no
  supports-priv-flags: no

Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
---
Changes in v3:
  - Add tag Reviewed-by Vincent Mailhol

Changes in v2:
  - Add two space indentation to terminal output.
    Suggested by Vincent Mailhol [1]

[1] https://lore.kernel.org/linux-can/20250723083236.9-1-extja@kvaser.com/T/#m31ee4aad13ee29d5559b56fdce842609ae4f67c5

 drivers/net/can/usb/kvaser_usb/kvaser_usb.h   |  4 +++
 .../net/can/usb/kvaser_usb/kvaser_usb_core.c  | 15 ++++++++---
 .../can/usb/kvaser_usb/kvaser_usb_devlink.c   | 25 +++++++++++++++++++
 3 files changed, 41 insertions(+), 3 deletions(-)

diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
index d5f913ac9b44..46a1b6907a50 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
@@ -131,6 +131,7 @@ struct kvaser_usb {
 
 struct kvaser_usb_net_priv {
 	struct can_priv can;
+	struct devlink_port devlink_port;
 	struct can_berr_counter bec;
 
 	/* subdriver-specific data */
@@ -229,6 +230,9 @@ extern const struct kvaser_usb_dev_ops kvaser_usb_leaf_dev_ops;
 
 extern const struct devlink_ops kvaser_usb_devlink_ops;
 
+int kvaser_usb_devlink_port_register(struct kvaser_usb_net_priv *priv);
+void kvaser_usb_devlink_port_unregister(struct kvaser_usb_net_priv *priv);
+
 void kvaser_usb_unlink_tx_urbs(struct kvaser_usb_net_priv *priv);
 
 int kvaser_usb_recv_cmd(const struct kvaser_usb *dev, void *cmd, int len,
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
index b9b2e120a5cd..90e77fa0ff4a 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
@@ -818,6 +818,7 @@ static void kvaser_usb_remove_interfaces(struct kvaser_usb *dev)
 		if (ops->dev_remove_channel)
 			ops->dev_remove_channel(priv);
 
+		kvaser_usb_devlink_port_unregister(priv);
 		free_candev(priv->netdev);
 	}
 }
@@ -891,20 +892,28 @@ static int kvaser_usb_init_one(struct kvaser_usb *dev, int channel)
 	if (ops->dev_init_channel) {
 		err = ops->dev_init_channel(priv);
 		if (err)
-			goto err;
+			goto candev_free;
+	}
+
+	err = kvaser_usb_devlink_port_register(priv);
+	if (err) {
+		dev_err(&dev->intf->dev, "Failed to register devlink port\n");
+		goto candev_free;
 	}
 
 	err = register_candev(netdev);
 	if (err) {
 		dev_err(&dev->intf->dev, "Failed to register CAN device\n");
-		goto err;
+		goto unregister_devlink_port;
 	}
 
 	netdev_dbg(netdev, "device registered\n");
 
 	return 0;
 
-err:
+unregister_devlink_port:
+	kvaser_usb_devlink_port_unregister(priv);
+candev_free:
 	free_candev(netdev);
 	dev->nets[channel] = NULL;
 	return err;
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_devlink.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_devlink.c
index aa06bd1fa125..e838b82298ae 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_devlink.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_devlink.c
@@ -5,6 +5,7 @@
  */
 #include "kvaser_usb.h"
 
+#include <linux/netdevice.h>
 #include <net/devlink.h>
 
 #define KVASER_USB_EAN_MSB 0x00073301
@@ -60,3 +61,27 @@ static int kvaser_usb_devlink_info_get(struct devlink *devlink,
 const struct devlink_ops kvaser_usb_devlink_ops = {
 	.info_get = kvaser_usb_devlink_info_get,
 };
+
+int kvaser_usb_devlink_port_register(struct kvaser_usb_net_priv *priv)
+{
+	int ret;
+	struct devlink_port_attrs attrs = {
+		.flavour = DEVLINK_PORT_FLAVOUR_PHYSICAL,
+		.phys.port_number = priv->channel,
+	};
+	devlink_port_attrs_set(&priv->devlink_port, &attrs);
+
+	ret = devlink_port_register(priv_to_devlink(priv->dev),
+				    &priv->devlink_port, priv->channel);
+	if (ret)
+		return ret;
+
+	SET_NETDEV_DEVLINK_PORT(priv->netdev, &priv->devlink_port);
+
+	return 0;
+}
+
+void kvaser_usb_devlink_port_unregister(struct kvaser_usb_net_priv *priv)
+{
+	devlink_port_unregister(&priv->devlink_port);
+}
-- 
2.49.0


  parent reply	other threads:[~2025-07-25 12:35 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-25 12:34 [PATCH v3 00/11] can: kvaser_usb: Simplify identification of physical CAN interfaces Jimmy Assarsson
2025-07-25 12:34 ` [PATCH v3 01/11] can: kvaser_usb: Add support to control CAN LEDs on device Jimmy Assarsson
2025-07-25 12:34 ` [PATCH v3 02/11] can: kvaser_usb: Add support for ethtool set_phys_id() Jimmy Assarsson
2025-07-25 12:34 ` [PATCH v3 03/11] can: kvaser_usb: Assign netdev.dev_port based on device channel index Jimmy Assarsson
2025-07-25 12:34 ` [PATCH v3 04/11] can: kvaser_usb: Add intermediate variables Jimmy Assarsson
2025-07-25 12:34 ` [PATCH v3 05/11] can: kvaser_usb: Move comment regarding max_tx_urbs Jimmy Assarsson
2025-07-25 12:34 ` [PATCH v3 06/11] can: kvaser_usb: Store the different firmware version components in a struct Jimmy Assarsson
2025-07-25 12:34 ` [PATCH v3 07/11] can: kvaser_usb: Store additional device information Jimmy Assarsson
2025-07-25 12:34 ` [PATCH v3 08/11] can: kvaser_usb: Add devlink support Jimmy Assarsson
2025-07-25 12:34 ` [PATCH v3 09/11] can: kvaser_usb: Expose device information via devlink info_get() Jimmy Assarsson
2025-07-25 12:34 ` Jimmy Assarsson [this message]
2025-07-25 12:34 ` [PATCH v3 11/11] Documentation: devlink: add devlink documentation for the kvaser_usb driver Jimmy Assarsson
2025-07-25 16:14 ` [PATCH v3 00/11] can: kvaser_usb: Simplify identification of physical CAN interfaces Marc Kleine-Budde
2025-07-26 20:53 ` Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250725123452.41-11-extja@kvaser.com \
    --to=extja@kvaser.com \
    --cc=horms@kernel.org \
    --cc=jimmyassarsson@gmail.com \
    --cc=linux-can@vger.kernel.org \
    --cc=mailhol.vincent@wanadoo.fr \
    --cc=mkl@pengutronix.de \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox