From: Vincent Mailhol <mailhol@kernel.org>
To: Marc Kleine-Budde <mkl@pengutronix.de>,
Oliver Hartkopp <socketcan@hartkopp.net>
Cc: "Vincent Mailhol" <mailhol@kernel.org>,
"Stéphane Grosjean" <stephane.grosjean@hms-networks.com>,
"Robert Nawrath" <mbro1689@gmail.com>,
"Minh Le" <minh.le.aj@renesas.com>,
"Duy Nguyen" <duy.nguyen.rh@renesas.com>,
linux-can@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 12/21] can: netlink: add can_ctrlmode_changelink()
Date: Wed, 03 Sep 2025 17:50:11 +0900 [thread overview]
Message-ID: <20250903-canxl-netlink-prep-v1-12-904bd6037cd9@kernel.org> (raw)
In-Reply-To: <20250903-canxl-netlink-prep-v1-0-904bd6037cd9@kernel.org>
Split the control mode change link logic into a new function:
can_ctrlmode_changelink(). The purpose is to increase code readability
by preventing can_changelink() from becoming too big.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
---
drivers/net/can/dev/netlink.c | 98 ++++++++++++++++++++++++-------------------
1 file changed, 55 insertions(+), 43 deletions(-)
diff --git a/drivers/net/can/dev/netlink.c b/drivers/net/can/dev/netlink.c
index 47c0b88ab2b3b1f6a2b006760124fe0ba4767e42..2f6192fc439bc3a7528aea2ad17efd18fce91c2c 100644
--- a/drivers/net/can/dev/netlink.c
+++ b/drivers/net/can/dev/netlink.c
@@ -164,6 +164,60 @@ static int can_validate(struct nlattr *tb[], struct nlattr *data[],
return 0;
}
+static int can_ctrlmode_changelink(struct net_device *dev,
+ struct nlattr *data[],
+ struct netlink_ext_ack *extack)
+{
+ struct can_priv *priv = netdev_priv(dev);
+ struct can_ctrlmode *cm;
+ u32 maskedflags;
+ u32 ctrlstatic;
+
+ if (!data[IFLA_CAN_CTRLMODE])
+ return 0;
+
+ /* Do not allow changing controller mode while running */
+ if (dev->flags & IFF_UP)
+ return -EBUSY;
+
+ cm = nla_data(data[IFLA_CAN_CTRLMODE]);
+ maskedflags = cm->flags & cm->mask;
+ ctrlstatic = can_get_static_ctrlmode(priv);
+
+ /* check whether provided bits are allowed to be passed */
+ if (maskedflags & ~(priv->ctrlmode_supported | ctrlstatic))
+ return -EOPNOTSUPP;
+
+ /* do not check for static fd-non-iso if 'fd' is disabled */
+ if (!(maskedflags & CAN_CTRLMODE_FD))
+ ctrlstatic &= ~CAN_CTRLMODE_FD_NON_ISO;
+
+ /* make sure static options are provided by configuration */
+ if ((maskedflags & ctrlstatic) != ctrlstatic)
+ return -EOPNOTSUPP;
+
+ /* If a top dependency flag is provided, reset all its dependencies */
+ if (cm->mask & CAN_CTRLMODE_FD)
+ priv->ctrlmode &= !CAN_CTRLMODE_FD_TDC_MASK;
+
+ /* clear bits to be modified and copy the flag values */
+ priv->ctrlmode &= ~cm->mask;
+ priv->ctrlmode |= maskedflags;
+
+ /* CAN_CTRLMODE_FD can only be set when driver supports FD */
+ if (priv->ctrlmode & CAN_CTRLMODE_FD) {
+ dev->mtu = CANFD_MTU;
+ } else {
+ dev->mtu = CAN_MTU;
+ memset(&priv->fd.data_bittiming, 0,
+ sizeof(priv->fd.data_bittiming));
+ priv->ctrlmode &= ~CAN_CTRLMODE_FD_TDC_MASK;
+ memset(&priv->fd.tdc, 0, sizeof(priv->fd.tdc));
+ }
+
+ return 0;
+}
+
static int can_tdc_changelink(struct data_bittiming_params *dbt_params,
const struct nlattr *nla,
struct netlink_ext_ack *extack)
@@ -307,49 +361,7 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
/* We need synchronization with dev->stop() */
ASSERT_RTNL();
- if (data[IFLA_CAN_CTRLMODE]) {
- struct can_ctrlmode *cm;
- u32 ctrlstatic;
- u32 maskedflags;
-
- /* Do not allow changing controller mode while running */
- if (dev->flags & IFF_UP)
- return -EBUSY;
- cm = nla_data(data[IFLA_CAN_CTRLMODE]);
- ctrlstatic = can_get_static_ctrlmode(priv);
- maskedflags = cm->flags & cm->mask;
-
- /* check whether provided bits are allowed to be passed */
- if (maskedflags & ~(priv->ctrlmode_supported | ctrlstatic))
- return -EOPNOTSUPP;
-
- /* do not check for static fd-non-iso if 'fd' is disabled */
- if (!(maskedflags & CAN_CTRLMODE_FD))
- ctrlstatic &= ~CAN_CTRLMODE_FD_NON_ISO;
-
- /* make sure static options are provided by configuration */
- if ((maskedflags & ctrlstatic) != ctrlstatic)
- return -EOPNOTSUPP;
-
- /* If a top dependency flag is provided, reset all its dependencies */
- if (cm->mask & CAN_CTRLMODE_FD)
- priv->ctrlmode &= !CAN_CTRLMODE_FD_TDC_MASK;
-
- /* clear bits to be modified and copy the flag values */
- priv->ctrlmode &= ~cm->mask;
- priv->ctrlmode |= maskedflags;
-
- /* CAN_CTRLMODE_FD can only be set when driver supports FD */
- if (priv->ctrlmode & CAN_CTRLMODE_FD) {
- dev->mtu = CANFD_MTU;
- } else {
- dev->mtu = CAN_MTU;
- memset(&priv->fd.data_bittiming, 0,
- sizeof(priv->fd.data_bittiming));
- priv->ctrlmode &= ~CAN_CTRLMODE_FD_TDC_MASK;
- memset(&priv->fd.tdc, 0, sizeof(priv->fd.tdc));
- }
- }
+ can_ctrlmode_changelink(dev, data, extack);
if (data[IFLA_CAN_BITTIMING]) {
struct can_bittiming bt;
--
2.49.1
next prev parent reply other threads:[~2025-09-03 8:52 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-03 8:49 [PATCH 00/21] can: netlink: preparation before introduction of CAN XL step 2/2 Vincent Mailhol
2025-09-03 8:50 ` [PATCH 01/21] can: dev: move struct data_bittiming_params to linux/can/bittiming.h Vincent Mailhol
2025-09-03 8:50 ` [PATCH 02/21] can: dev: make can_get_relative_tdco() FD agnostic and move it to bittiming.h Vincent Mailhol
2025-09-03 8:50 ` [PATCH 03/21] can: netlink: document which symbols are FD specific Vincent Mailhol
2025-09-03 8:50 ` [PATCH 04/21] can: netlink: refactor can_validate_bittiming() Vincent Mailhol
2025-09-03 8:50 ` [PATCH 05/21] can: netlink: add can_validate_tdc() Vincent Mailhol
2025-09-03 8:50 ` [PATCH 06/21] can: netlink: add can_validate_databittiming() Vincent Mailhol
2025-09-04 18:46 ` kernel test robot
2025-09-05 14:55 ` Vincent Mailhol
2025-09-03 8:50 ` [PATCH 07/21] can: netlink: remove comment in can_validate() Vincent Mailhol
2025-09-04 6:51 ` Oliver Hartkopp
2025-09-04 9:48 ` Vincent Mailhol
2025-09-05 10:55 ` Oliver Hartkopp
2025-09-05 15:12 ` Vincent Mailhol
2025-09-03 8:50 ` [PATCH 08/21] can: netlink: refactor CAN_CTRLMODE_TDC_{AUTO,MANUAL} flag reset logic Vincent Mailhol
2025-09-03 8:50 ` [PATCH 09/21] can: netlink: remove useless check in can_tdc_changelink() Vincent Mailhol
2025-09-03 8:50 ` [PATCH 10/21] can: netlink: make can_tdc_changelink() FD agnostic Vincent Mailhol
2025-09-03 8:50 ` [PATCH 11/21] can: netlink: add can_dtb_changelink() Vincent Mailhol
2025-09-04 20:29 ` kernel test robot
2025-09-03 8:50 ` Vincent Mailhol [this message]
2025-09-03 8:50 ` [PATCH 13/21] can: netlink: make can_tdc_get_size() FD agnostic Vincent Mailhol
2025-09-03 8:50 ` [PATCH 14/21] can: netlink: add can_data_bittiming_get_size() Vincent Mailhol
2025-09-03 8:50 ` [PATCH 15/21] can: netlink: add can_bittiming_fill_info() Vincent Mailhol
2025-09-03 8:50 ` [PATCH 16/21] can: netlink: add can_bittiming_const_fill_info() Vincent Mailhol
2025-09-03 8:50 ` [PATCH 17/21] can: netlink: add can_bitrate_const_fill_info() Vincent Mailhol
2025-09-03 8:50 ` [PATCH 18/21] can: netlink: make can_tdc_fill_info() FD agnostic Vincent Mailhol
2025-09-04 22:01 ` kernel test robot
2025-09-03 8:50 ` [PATCH 19/21] can: calc_bittiming: make can_calc_tdco() " Vincent Mailhol
2025-09-03 8:50 ` [PATCH 20/21] can: dev: add can_get_ctrlmode_str() Vincent Mailhol
2025-09-03 8:50 ` [PATCH 21/21] can: netlink: add userland error messages Vincent Mailhol
2025-09-03 9:26 ` [PATCH 00/21] can: netlink: preparation before introduction of CAN XL step 2/2 Vincent Mailhol
2025-09-04 6:36 ` Oliver Hartkopp
2025-09-04 9:18 ` Vincent Mailhol
2025-09-05 11:11 ` Oliver Hartkopp
2025-09-05 14:58 ` Vincent Mailhol
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250903-canxl-netlink-prep-v1-12-904bd6037cd9@kernel.org \
--to=mailhol@kernel.org \
--cc=duy.nguyen.rh@renesas.com \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mbro1689@gmail.com \
--cc=minh.le.aj@renesas.com \
--cc=mkl@pengutronix.de \
--cc=socketcan@hartkopp.net \
--cc=stephane.grosjean@hms-networks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox