From: Vincent Mailhol <mailhol@kernel.org>
To: Marc Kleine-Budde <mkl@pengutronix.de>,
Oliver Hartkopp <socketcan@hartkopp.net>
Cc: "Vincent Mailhol" <mailhol@kernel.org>,
"Stéphane Grosjean" <stephane.grosjean@hms-networks.com>,
"Robert Nawrath" <mbro1689@gmail.com>,
"Minh Le" <minh.le.aj@renesas.com>,
"Duy Nguyen" <duy.nguyen.rh@renesas.com>,
linux-can@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 02/20] can: dev: make can_get_relative_tdco() FD agnostic and move it to bittiming.h
Date: Wed, 10 Sep 2025 15:03:27 +0900 [thread overview]
Message-ID: <20250910-canxl-netlink-prep-v2-2-f128d4083721@kernel.org> (raw)
In-Reply-To: <20250910-canxl-netlink-prep-v2-0-f128d4083721@kernel.org>
can_get_relative_tdco() needs to access can_priv->fd making it
specific to CAN FD. Change the function parameter from struct can_priv
to struct data_bittiming_params. This way, the function becomes CAN FD
agnostic and can be reused later on for the CAN XL TDC.
Now that we dropped the dependency on struct can_priv, also move
can_get_relative_tdco() back to bittiming.h where it was meant to
belong to.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
---
Changelog:
RFC -> v1:
- Just pass the IFLA index instead of passing each argument
individually. Instead, derive these as local variables depending
on whethe the IFLA index is IFLA_CAN_TDC or IFLA_CAN_XL_TDC.
---
include/linux/can/bittiming.h | 29 +++++++++++++++++++++++++++++
include/linux/can/dev.h | 29 -----------------------------
2 files changed, 29 insertions(+), 29 deletions(-)
diff --git a/include/linux/can/bittiming.h b/include/linux/can/bittiming.h
index 6572ec1712ca2df8db7fe1453ae5a4d5699712b1..4d5f7794194ab13641c7854c2d66625c4e942f6c 100644
--- a/include/linux/can/bittiming.h
+++ b/include/linux/can/bittiming.h
@@ -160,6 +160,35 @@ int can_get_bittiming(const struct net_device *dev, struct can_bittiming *bt,
const unsigned int bitrate_const_cnt,
struct netlink_ext_ack *extack);
+/*
+ * can_get_relative_tdco() - TDCO relative to the sample point
+ *
+ * struct can_tdc::tdco represents the absolute offset from TDCV. Some
+ * controllers use instead an offset relative to the Sample Point (SP)
+ * such that:
+ *
+ * SSP = TDCV + absolute TDCO
+ * = TDCV + SP + relative TDCO
+ *
+ * -+----------- one bit ----------+-- TX pin
+ * |<--- Sample Point --->|
+ *
+ * --+----------- one bit ----------+-- RX pin
+ * |<-------- TDCV -------->|
+ * |<------------------------>| absolute TDCO
+ * |<--- Sample Point --->|
+ * | |<->| relative TDCO
+ * |<------------- Secondary Sample Point ------------>|
+ */
+static inline s32 can_get_relative_tdco(const struct data_bittiming_params *dbt_params)
+{
+ const struct can_bittiming *dbt = &dbt_params->data_bittiming;
+ s32 sample_point_in_tc = (CAN_SYNC_SEG + dbt->prop_seg +
+ dbt->phase_seg1) * dbt->brp;
+
+ return (s32)dbt_params->tdc.tdco - sample_point_in_tc;
+}
+
/*
* can_bit_time() - Duration of one bit
*
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index 76022f48a97673d81676c39c697eadc6d7063ff7..55aaadaacf68f940fa1b71f7c438e68b84080292 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -85,35 +85,6 @@ static inline bool can_fd_tdc_is_enabled(const struct can_priv *priv)
return !!(priv->ctrlmode & CAN_CTRLMODE_FD_TDC_MASK);
}
-/*
- * can_get_relative_tdco() - TDCO relative to the sample point
- *
- * struct can_tdc::tdco represents the absolute offset from TDCV. Some
- * controllers use instead an offset relative to the Sample Point (SP)
- * such that:
- *
- * SSP = TDCV + absolute TDCO
- * = TDCV + SP + relative TDCO
- *
- * -+----------- one bit ----------+-- TX pin
- * |<--- Sample Point --->|
- *
- * --+----------- one bit ----------+-- RX pin
- * |<-------- TDCV -------->|
- * |<------------------------>| absolute TDCO
- * |<--- Sample Point --->|
- * | |<->| relative TDCO
- * |<------------- Secondary Sample Point ------------>|
- */
-static inline s32 can_get_relative_tdco(const struct can_priv *priv)
-{
- const struct can_bittiming *dbt = &priv->fd.data_bittiming;
- s32 sample_point_in_tc = (CAN_SYNC_SEG + dbt->prop_seg +
- dbt->phase_seg1) * dbt->brp;
-
- return (s32)priv->fd.tdc.tdco - sample_point_in_tc;
-}
-
/* helper to define static CAN controller features at device creation time */
static inline int __must_check can_set_static_ctrlmode(struct net_device *dev,
u32 static_mode)
--
2.49.1
next prev parent reply other threads:[~2025-09-10 6:04 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-10 6:03 [PATCH v2 00/20] can: netlink: preparation before introduction of CAN XL step 2/2 Vincent Mailhol
2025-09-10 6:03 ` [PATCH v2 01/20] can: dev: move struct data_bittiming_params to linux/can/bittiming.h Vincent Mailhol
2025-09-10 6:03 ` Vincent Mailhol [this message]
2025-09-10 6:03 ` [PATCH v2 03/20] can: netlink: document which symbols are FD specific Vincent Mailhol
2025-09-10 6:03 ` [PATCH v2 04/20] can: netlink: refactor can_validate_bittiming() Vincent Mailhol
2025-09-10 6:13 ` Marc Kleine-Budde
2025-09-10 6:43 ` Vincent Mailhol
2025-09-10 10:55 ` Marc Kleine-Budde
2025-09-10 11:12 ` Vincent Mailhol
2025-09-10 6:03 ` [PATCH v2 05/20] can: netlink: add can_validate_tdc() Vincent Mailhol
2025-09-10 6:03 ` [PATCH v2 06/20] can: netlink: add can_validate_databittiming() Vincent Mailhol
2025-09-10 6:03 ` [PATCH v2 07/20] can: netlink: refactor CAN_CTRLMODE_TDC_{AUTO,MANUAL} flag reset logic Vincent Mailhol
2025-09-20 7:24 ` Vincent Mailhol
2025-09-22 9:43 ` Marc Kleine-Budde
2025-09-22 11:14 ` Vincent Mailhol
2025-09-22 13:06 ` Marc Kleine-Budde
2025-09-23 7:04 ` Vincent Mailhol
2025-09-23 9:08 ` Marc Kleine-Budde
2025-09-23 9:36 ` Vincent Mailhol
2025-09-10 6:03 ` [PATCH v2 08/20] can: netlink: remove useless check in can_tdc_changelink() Vincent Mailhol
2025-09-10 6:03 ` [PATCH v2 09/20] can: netlink: make can_tdc_changelink() FD agnostic Vincent Mailhol
2025-09-10 6:03 ` [PATCH v2 10/20] can: netlink: add can_dtb_changelink() Vincent Mailhol
2025-09-10 6:03 ` [PATCH v2 11/20] can: netlink: add can_ctrlmode_changelink() Vincent Mailhol
2025-09-10 6:03 ` [PATCH v2 12/20] can: netlink: make can_tdc_get_size() FD agnostic Vincent Mailhol
2025-09-10 6:03 ` [PATCH v2 13/20] can: netlink: add can_data_bittiming_get_size() Vincent Mailhol
2025-09-10 6:03 ` [PATCH v2 14/20] can: netlink: add can_bittiming_fill_info() Vincent Mailhol
2025-09-10 6:03 ` [PATCH v2 15/20] can: netlink: add can_bittiming_const_fill_info() Vincent Mailhol
2025-09-10 6:03 ` [PATCH v2 16/20] can: netlink: add can_bitrate_const_fill_info() Vincent Mailhol
2025-09-10 6:03 ` [PATCH v2 17/20] can: netlink: make can_tdc_fill_info() FD agnostic Vincent Mailhol
2025-09-10 6:03 ` [PATCH v2 18/20] can: calc_bittiming: make can_calc_tdco() " Vincent Mailhol
2025-09-10 6:03 ` [PATCH v2 19/20] can: dev: add can_get_ctrlmode_str() Vincent Mailhol
2025-09-10 6:03 ` [PATCH v2 20/20] can: netlink: add userland error messages Vincent Mailhol
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250910-canxl-netlink-prep-v2-2-f128d4083721@kernel.org \
--to=mailhol@kernel.org \
--cc=duy.nguyen.rh@renesas.com \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mbro1689@gmail.com \
--cc=minh.le.aj@renesas.com \
--cc=mkl@pengutronix.de \
--cc=socketcan@hartkopp.net \
--cc=stephane.grosjean@hms-networks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).