From: Celeste Liu <uwu@coelacanthus.name>
To: Marc Kleine-Budde <mkl@pengutronix.de>,
Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Cc: Maximilian Schneider <max@schneidersoft.net>,
Henrik Brix Andersen <henrik@brixandersen.dk>,
Wolfgang Grandegger <wg@grandegger.com>,
Kees Cook <kees@kernel.org>,
"Gustavo A. R. Silva" <gustavoars@kernel.org>,
linux-can@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org, Runcheng Lu <runcheng.lu@hpmicro.com>,
Celeste Liu <uwu@coelacanthus.name>
Subject: [PATCH v2] net/can/gs_usb: increase max interface to U8_MAX
Date: Tue, 30 Sep 2025 11:00:06 +0800 [thread overview]
Message-ID: <20250930-gs-usb-max-if-v2-1-2cf9a44e6861@coelacanthus.name> (raw)
This issue was found by Runcheng Lu when develop HSCanT USB to CAN FD
converter[1]. The original developers may have only 3 intefaces device to
test so they write 3 here and wait for future change.
During the HSCanT development, we actually used 4 interfaces, so the
limitation of 3 is not enough now. But just increase one is not
future-proofed. Since the channel type in gs_host_frame is u8, just
increase interface number limit to max size of u8 safely.
[1]: https://github.com/cherry-embedded/HSCanT-hardware
Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Reported-by: Runcheng Lu <runcheng.lu@hpmicro.com>
Signed-off-by: Celeste Liu <uwu@coelacanthus.name>
---
Changes in v2:
- Use flexible array member instead of fixed array.
- Link to v1: https://lore.kernel.org/r/20250929-gs-usb-max-if-v1-1-e41b5c09133a@coelacanthus.name
---
drivers/net/can/usb/gs_usb.c | 22 ++++++++++------------
1 file changed, 10 insertions(+), 12 deletions(-)
diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c
index c9482d6e947b0c7b033dc4f0c35f5b111e1bfd92..69b068c8fa8fbab42337e2b0a3d0860ac678c792 100644
--- a/drivers/net/can/usb/gs_usb.c
+++ b/drivers/net/can/usb/gs_usb.c
@@ -289,11 +289,6 @@ struct gs_host_frame {
#define GS_MAX_RX_URBS 30
#define GS_NAPI_WEIGHT 32
-/* Maximum number of interfaces the driver supports per device.
- * Current hardware only supports 3 interfaces. The future may vary.
- */
-#define GS_MAX_INTF 3
-
struct gs_tx_context {
struct gs_can *dev;
unsigned int echo_id;
@@ -324,7 +319,6 @@ struct gs_can {
/* usb interface struct */
struct gs_usb {
- struct gs_can *canch[GS_MAX_INTF];
struct usb_anchor rx_submitted;
struct usb_device *udev;
@@ -336,9 +330,11 @@ struct gs_usb {
unsigned int hf_size_rx;
u8 active_channels;
+ u8 channel_cnt;
unsigned int pipe_in;
unsigned int pipe_out;
+ struct gs_can *canch[] __counted_by(channel_cnt);
};
/* 'allocate' a tx context.
@@ -599,7 +595,7 @@ static void gs_usb_receive_bulk_callback(struct urb *urb)
}
/* device reports out of range channel id */
- if (hf->channel >= GS_MAX_INTF)
+ if (hf->channel >= parent->channel_cnt)
goto device_detach;
dev = parent->canch[hf->channel];
@@ -699,7 +695,7 @@ static void gs_usb_receive_bulk_callback(struct urb *urb)
/* USB failure take down all interfaces */
if (rc == -ENODEV) {
device_detach:
- for (rc = 0; rc < GS_MAX_INTF; rc++) {
+ for (rc = 0; rc < parent->channel_cnt; rc++) {
if (parent->canch[rc])
netif_device_detach(parent->canch[rc]->netdev);
}
@@ -1460,17 +1456,19 @@ static int gs_usb_probe(struct usb_interface *intf,
icount = dconf.icount + 1;
dev_info(&intf->dev, "Configuring for %u interfaces\n", icount);
- if (icount > GS_MAX_INTF) {
+ if (icount > type_max(typeof(parent->channel_cnt))) {
dev_err(&intf->dev,
"Driver cannot handle more that %u CAN interfaces\n",
- GS_MAX_INTF);
+ type_max(typeof(parent->channel_cnt)));
return -EINVAL;
}
- parent = kzalloc(sizeof(*parent), GFP_KERNEL);
+ parent = kzalloc(struct_size(parent, canch, icount), GFP_KERNEL);
if (!parent)
return -ENOMEM;
+ parent->channel_cnt = icount;
+
init_usb_anchor(&parent->rx_submitted);
usb_set_intfdata(intf, parent);
@@ -1531,7 +1529,7 @@ static void gs_usb_disconnect(struct usb_interface *intf)
return;
}
- for (i = 0; i < GS_MAX_INTF; i++)
+ for (i = 0; i < parent->channel_cnt; i++)
if (parent->canch[i])
gs_destroy_candev(parent->canch[i]);
---
base-commit: e5f0a698b34ed76002dc5cff3804a61c80233a7a
change-id: 20250929-gs-usb-max-if-a304c83243e5
Best regards,
--
Celeste Liu <uwu@coelacanthus.name>
next reply other threads:[~2025-09-30 3:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-30 3:00 Celeste Liu [this message]
2025-09-30 3:09 ` [PATCH v2] net/can/gs_usb: increase max interface to U8_MAX Celeste Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250930-gs-usb-max-if-v2-1-2cf9a44e6861@coelacanthus.name \
--to=uwu@coelacanthus.name \
--cc=gustavoars@kernel.org \
--cc=henrik@brixandersen.dk \
--cc=kees@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mailhol.vincent@wanadoo.fr \
--cc=max@schneidersoft.net \
--cc=mkl@pengutronix.de \
--cc=runcheng.lu@hpmicro.com \
--cc=stable@vger.kernel.org \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).