From: Marc Kleine-Budde <mkl@pengutronix.de>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kuba@kernel.org, linux-can@vger.kernel.org,
kernel@pengutronix.de, Marc Kleine-Budde <mkl@pengutronix.de>
Subject: [PATCH net-next 07/13] can: m_can: m_can_init_ram(): make static
Date: Fri, 17 Oct 2025 17:04:15 +0200 [thread overview]
Message-ID: <20251017150819.1415685-8-mkl@pengutronix.de> (raw)
In-Reply-To: <20251017150819.1415685-1-mkl@pengutronix.de>
Since commit eaacfeaca7ad ("can: m_can: Call the RAM init directly from
m_can_chip_config") m_can_init_ram() is not used outside of m_can.c.
Mark as static and remove the EXPORT_SYMBOL_GPL().
Link: https://patch.msgid.link/20251008-m_can-cleanups-v1-1-1784a18eaa84@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
drivers/net/can/m_can/m_can.c | 43 +++++++++++++++++------------------
drivers/net/can/m_can/m_can.h | 1 -
2 files changed, 21 insertions(+), 23 deletions(-)
diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 8569596ae830..9f4002f3481e 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1380,6 +1380,27 @@ static const struct can_bittiming_const m_can_data_bittiming_const_31X = {
.brp_inc = 1,
};
+static int m_can_init_ram(struct m_can_classdev *cdev)
+{
+ int end, i, start;
+ int err = 0;
+
+ /* initialize the entire Message RAM in use to avoid possible
+ * ECC/parity checksum errors when reading an uninitialized buffer
+ */
+ start = cdev->mcfg[MRAM_SIDF].off;
+ end = cdev->mcfg[MRAM_TXB].off +
+ cdev->mcfg[MRAM_TXB].num * TXB_ELEMENT_SIZE;
+
+ for (i = start; i < end; i += 4) {
+ err = m_can_fifo_write_no_off(cdev, i, 0x0);
+ if (err)
+ break;
+ }
+
+ return err;
+}
+
static int m_can_set_bittiming(struct net_device *dev)
{
struct m_can_classdev *cdev = netdev_priv(dev);
@@ -2374,28 +2395,6 @@ static void m_can_of_parse_mram(struct m_can_classdev *cdev,
cdev->mcfg[MRAM_TXB].off, cdev->mcfg[MRAM_TXB].num);
}
-int m_can_init_ram(struct m_can_classdev *cdev)
-{
- int end, i, start;
- int err = 0;
-
- /* initialize the entire Message RAM in use to avoid possible
- * ECC/parity checksum errors when reading an uninitialized buffer
- */
- start = cdev->mcfg[MRAM_SIDF].off;
- end = cdev->mcfg[MRAM_TXB].off +
- cdev->mcfg[MRAM_TXB].num * TXB_ELEMENT_SIZE;
-
- for (i = start; i < end; i += 4) {
- err = m_can_fifo_write_no_off(cdev, i, 0x0);
- if (err)
- break;
- }
-
- return err;
-}
-EXPORT_SYMBOL_GPL(m_can_init_ram);
-
int m_can_class_get_clocks(struct m_can_classdev *cdev)
{
int ret = 0;
diff --git a/drivers/net/can/m_can/m_can.h b/drivers/net/can/m_can/m_can.h
index f2f89687bbd2..4743342b2fba 100644
--- a/drivers/net/can/m_can/m_can.h
+++ b/drivers/net/can/m_can/m_can.h
@@ -139,7 +139,6 @@ void m_can_class_free_dev(struct net_device *net);
int m_can_class_register(struct m_can_classdev *cdev);
void m_can_class_unregister(struct m_can_classdev *cdev);
int m_can_class_get_clocks(struct m_can_classdev *cdev);
-int m_can_init_ram(struct m_can_classdev *priv);
int m_can_check_mram_cfg(struct m_can_classdev *cdev, u32 mram_max_size);
int m_can_class_suspend(struct device *dev);
--
2.51.0
next prev parent reply other threads:[~2025-10-17 15:08 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-17 15:04 [PATCH net-next 0/13] pull-request: can-next 2025-10-17 Marc Kleine-Budde
2025-10-17 15:04 ` [PATCH net-next 01/13] can: m_can: add support for optional reset Marc Kleine-Budde
2025-10-21 1:50 ` patchwork-bot+netdevbpf
2025-10-17 15:04 ` [PATCH net-next 02/13] can: treewide: remove can_change_mtu() Marc Kleine-Budde
2025-10-17 15:04 ` [PATCH net-next 03/13] dt-bindings: can: m_can: Add wakeup properties Marc Kleine-Budde
2025-10-17 15:04 ` [PATCH net-next 04/13] can: m_can: Map WoL to device_set_wakeup_enable Marc Kleine-Budde
2025-10-17 15:04 ` [PATCH net-next 05/13] can: m_can: Return ERR_PTR on error in allocation Marc Kleine-Budde
2025-10-17 15:04 ` [PATCH net-next 06/13] can: m_can: Support pinctrl wakeup state Marc Kleine-Budde
2025-10-17 15:04 ` Marc Kleine-Budde [this message]
2025-10-17 15:04 ` [PATCH net-next 08/13] can: m_can: hrtimer_callback(): rename to m_can_polling_timer() Marc Kleine-Budde
2025-10-17 15:04 ` [PATCH net-next 09/13] net: m_can: convert dev_{dbg,info,err} -> netdev_{dbg,info,err} Marc Kleine-Budde
2025-10-17 15:04 ` [PATCH net-next 10/13] can: m_can: m_can_interrupt_enable(): use m_can_write() instead of open coding it Marc Kleine-Budde
2025-10-17 15:04 ` [PATCH net-next 11/13] can: m_can: m_can_class_register(): remove error message in case devm_kzalloc() fails Marc Kleine-Budde
2025-10-17 15:04 ` [PATCH net-next 12/13] can: m_can: m_can_tx_submit(): remove unneeded sanity checks Marc Kleine-Budde
2025-10-17 15:04 ` [PATCH net-next 13/13] can: m_can: m_can_get_berr_counter(): don't wake up controller if interface is down Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251017150819.1415685-8-mkl@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=davem@davemloft.net \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).