[can-next v3] can: Kconfig: select CAN driver infrastructure by default

[Oliver Hartkopp <socketcan@hartkopp.net>]

The CAN bus support enabled with CONFIG_CAN provides a socket-based
access to CAN interfaces. With the introduction of the latest CAN protocol
CAN XL additional configuration status information needs to be exposed to
the network layer than formerly provided by standard Linux network drivers.

This requires the CAN driver infrastructure to be selected by default.
As the CAN network layer can only operate on CAN interfaces anyway all
distributions and common default configs enable at least one CAN driver.

So selecting CONFIG_CAN_DEV when CONFIG_CAN is selected by the user has
no effect on established configurations but solves potential build issues
when CONFIG_CAN[_XXX]=y is set together with CANFIG_CAN_DEV=m

Fixes: 1a620a723853 ("can: raw: instantly reject unsupported CAN frames")
Reported-by: Vincent Mailhol <mailhol@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511282325.uVQFRTkA-lkp@intel.com/
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
---

v2: In fact CONFIG_CAN_NETLINK was missing too. Reported by kernel test robot.
v3: With the change in dev.h the compilation of the of the netlink code can be
    avoided when only virtual CAN interfaces (vcan, vxcan) are required.

---

 include/linux/can/dev.h | 7 +++++++
 net/can/Kconfig         | 1 +
 2 files changed, 8 insertions(+)

diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index 13b25b0dceeb..2514a5c942e5 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -109,11 +109,18 @@ struct net_device *alloc_candev_mqs(int sizeof_priv, unsigned int echo_skb_max,
 #define alloc_candev_mq(sizeof_priv, echo_skb_max, count) \
 	alloc_candev_mqs(sizeof_priv, echo_skb_max, count, count)
 void free_candev(struct net_device *dev);
 
 /* a candev safe wrapper around netdev_priv */
+#if IS_ENABLED(CONFIG_CAN_NETLINK)
 struct can_priv *safe_candev_priv(struct net_device *dev);
+#else
+static inline struct can_priv *safe_candev_priv(struct net_device *dev)
+{
+	return NULL;
+}
+#endif
 
 int open_candev(struct net_device *dev);
 void close_candev(struct net_device *dev);
 void can_set_default_mtu(struct net_device *dev);
 int __must_check can_set_static_ctrlmode(struct net_device *dev,
diff --git a/net/can/Kconfig b/net/can/Kconfig
index af64a6f76458..e4ccf731a24c 100644
--- a/net/can/Kconfig
+++ b/net/can/Kconfig
@@ -3,10 +3,11 @@
 # Controller Area Network (CAN) network layer core configuration
 #
 
 menuconfig CAN
 	tristate "CAN bus subsystem support"
+	select CAN_DEV
 	help
 	  Controller Area Network (CAN) is a slow (up to 1Mbit/s) serial
 	  communications protocol. Development of the CAN bus started in
 	  1983 at Robert Bosch GmbH, and the protocol was officially
 	  released in 1986. The CAN bus was originally mainly for automotive,
-- 
2.47.3