From: Oliver Hartkopp <socketcan@hartkopp.net>
To: linux-can@vger.kernel.org
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Subject: [PATCH v2] can: bcm: fix CAN frame rx/tx statistics
Date: Wed, 10 Jun 2026 18:37:43 +0200 [thread overview]
Message-ID: <20260610163744.51980-1-socketcan@hartkopp.net> (raw)
KCSAN detected a data race within the bcm_rx_handler() when two CAN frames
have been simultaneously received and processed in a single rx op by two
different CPUs.
Use atomic operations with (signed) long data types to access the
statistics in the hot path to fix the KCSAN complaint.
Additionally simplify the update and check of statistics overflow by
using the atomic operations in a separate bcm_update_stats() function.
Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
---
net/can/bcm.c | 38 ++++++++++++++++++++++++--------------
1 file changed, 24 insertions(+), 14 deletions(-)
diff --git a/net/can/bcm.c b/net/can/bcm.c
index 658c4a7a55df..e5db4dca8d5a 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -106,11 +106,11 @@ struct bcm_op {
struct list_head list;
struct rcu_head rcu;
int ifindex;
canid_t can_id;
u32 flags;
- unsigned long frames_abs, frames_filtered;
+ atomic_long_t frames_abs, frames_filtered;
struct bcm_timeval ival1, ival2;
struct hrtimer timer, thrtimer;
ktime_t rx_stamp, kt_ival1, kt_ival2, kt_lastmsg;
int rx_ifindex;
int cfsiz;
@@ -223,14 +223,17 @@ static int bcm_proc_show(struct seq_file *m, void *v)
rcu_read_lock();
list_for_each_entry_rcu(op, &bo->rx_ops, list) {
- unsigned long reduction;
+ long reduction, frames_filtered, frames_abs;
+
+ frames_filtered = atomic_long_read(&op->frames_filtered);
+ frames_abs = atomic_long_read(&op->frames_abs);
/* print only active entries & prevent division by zero */
- if (!op->frames_abs)
+ if (!frames_abs)
continue;
seq_printf(m, "rx_op: %03X %-5s ", op->can_id,
bcm_proc_getifname(net, ifname, op->ifindex));
@@ -248,13 +251,13 @@ static int bcm_proc_show(struct seq_file *m, void *v)
if (op->kt_ival2)
seq_printf(m, "thr=%lld ",
(long long)ktime_to_us(op->kt_ival2));
seq_printf(m, "# recv %ld (%ld) => reduction: ",
- op->frames_filtered, op->frames_abs);
+ frames_filtered, frames_abs);
- reduction = 100 - (op->frames_filtered * 100) / op->frames_abs;
+ reduction = 100 - (frames_filtered * 100) / frames_abs;
seq_printf(m, "%s%ld%%\n",
(reduction == 100) ? "near " : "", reduction);
}
@@ -274,20 +277,30 @@ static int bcm_proc_show(struct seq_file *m, void *v)
if (op->kt_ival2)
seq_printf(m, "t2=%lld ",
(long long)ktime_to_us(op->kt_ival2));
- seq_printf(m, "# sent %ld\n", op->frames_abs);
+ seq_printf(m, "# sent %ld\n",
+ atomic_long_read(&op->frames_abs));
}
seq_putc(m, '\n');
rcu_read_unlock();
return 0;
}
#endif /* CONFIG_PROC_FS */
+static void bcm_update_stats(struct bcm_op *op)
+{
+ /* prevent statistics overflow */
+ if (atomic_long_inc_return(&op->frames_abs) > LONG_MAX / 100) {
+ atomic_long_set(&op->frames_filtered, 0);
+ atomic_long_set(&op->frames_abs, 0);
+ }
+}
+
/*
* bcm_can_tx - send the (next) CAN frame to the appropriate CAN interface
* of the given bcm tx op
*/
static void bcm_can_tx(struct bcm_op *op)
@@ -334,11 +347,11 @@ static void bcm_can_tx(struct bcm_op *op)
/* update currframe and count under lock protection */
spin_lock_bh(&op->bcm_tx_lock);
if (!err)
- op->frames_abs++;
+ bcm_update_stats(op);
op->currframe++;
/* reached last frame? */
if (op->currframe >= op->nframes)
@@ -487,16 +500,13 @@ static enum hrtimer_restart bcm_tx_timeout_handler(struct hrtimer *hrtimer)
*/
static void bcm_rx_changed(struct bcm_op *op, struct canfd_frame *data)
{
struct bcm_msg_head head;
- /* update statistics */
- op->frames_filtered++;
-
- /* prevent statistics overflow */
- if (op->frames_filtered > ULONG_MAX/100)
- op->frames_filtered = op->frames_abs = 0;
+ /* update statistics (frames_filtered <= frames_abs) */
+ if (atomic_long_read(&op->frames_abs))
+ atomic_long_inc(&op->frames_filtered);
/* this element is not throttled anymore */
data->flags &= ~RX_THR;
memset(&head, 0, sizeof(head));
@@ -733,11 +743,11 @@ static void bcm_rx_handler(struct sk_buff *skb, void *data)
/* save rx timestamp */
op->rx_stamp = skb->tstamp;
/* save originator for recvfrom() */
op->rx_ifindex = skb->dev->ifindex;
/* update statistics */
- op->frames_abs++;
+ bcm_update_stats(op);
if (op->flags & RX_RTR_FRAME) {
/* send reply for RTR-request (placed in op->frames[0]) */
bcm_can_tx(op);
return;
--
2.53.0
next reply other threads:[~2026-06-10 16:40 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-10 16:37 Oliver Hartkopp [this message]
2026-06-10 16:37 ` [PATCH] can: bcm: use list_add_rcu() in bcm_[rx|tx]_setup() Oliver Hartkopp
2026-06-10 16:51 ` sashiko-bot
2026-06-10 16:53 ` [PATCH v2] can: bcm: fix CAN frame rx/tx statistics sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260610163744.51980-1-socketcan@hartkopp.net \
--to=socketcan@hartkopp.net \
--cc=linux-can@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox