From: Patrick Menschel <menschel.p@posteo.de>
To: Drew Fustini <drew@beagleboard.org>,
Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>,
linux-can@vger.kernel.org, Josh S <josh@macchina.cc>
Subject: Re: mcp251xfd on RPi 5.4 downstream
Date: Sat, 31 Oct 2020 16:35:43 +0100 [thread overview]
Message-ID: <3a5f81d6-13ba-71b8-67a7-fe6e8a13f84a@posteo.de> (raw)
In-Reply-To: <e955f39f-2417-4dca-ee3c-70b328c1014d@posteo.de>
> I believe Waveshare did choose other interrupt pins.
> Marc used 24 25 which I also chose for a pHat I'm currently making
> schematics for.
>
> Try these lines in /boot/config.txt
>
> dtoverlay=mcp251xfd-spi0-0,interrupt=25
> dtoverlay=mcp251xfd-spi1-0,interrupt=16
>
> The waveshare overlay is strange in one point. It uses Pin 26 (instead
> of 18) for Chip selection but that is no chip select pin. This can work
> if the pin is output and luckily pulls the CE line in the right direction.
>
> https://gist.github.com/pdp7/784d0ba8b9648d20ab055747ec945225#file-2xmcp2517fd-overlay-dts-L40
>
> https://pinout.xyz/pinout/pin37_gpio26#
>
> Maybe this has something to do with Nvidia Jetson Platform.
>
> --
> Patrick
>
Apparently Pin 26 is CE1 for SPI5, only available on Pi 4.
https://github.com/raspberrypi/firmware/blob/master/boot/overlays/README#L2674
--
Patrick
next prev parent reply other threads:[~2020-10-31 15:35 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-22 3:10 mcp251xfd on RPi 5.4 downstream Drew Fustini
2020-10-22 6:00 ` Drew Fustini
2020-10-22 6:33 ` Marc Kleine-Budde
2020-10-22 18:42 ` Drew Fustini
2020-10-25 4:30 ` Drew Fustini
2020-10-25 8:49 ` Oliver Hartkopp
2020-10-25 10:58 ` Marc Kleine-Budde
2020-10-25 17:43 ` Patrick Menschel
2020-10-25 18:14 ` Marc Kleine-Budde
2020-10-25 18:42 ` Patrick Menschel
2020-10-26 1:59 ` Drew Fustini
2020-10-26 2:50 ` Drew Fustini
2020-10-26 5:16 ` Patrick Menschel
2020-10-26 7:45 ` Marc Kleine-Budde
2020-10-26 9:40 ` Marc Kleine-Budde
2020-10-26 16:51 ` Patrick Menschel
2020-10-26 17:00 ` Marc Kleine-Budde
2020-10-27 2:22 ` Drew Fustini
2020-10-27 6:35 ` Drew Fustini
2020-10-27 7:06 ` Marc Kleine-Budde
2020-10-27 18:18 ` Patrick Menschel
2020-10-27 18:22 ` Marc Kleine-Budde
2020-10-28 1:57 ` Drew Fustini
2020-10-28 3:47 ` Drew Fustini
2020-10-28 7:57 ` Marc Kleine-Budde
2020-10-31 12:27 ` Drew Fustini
2020-10-31 15:14 ` Patrick Menschel
2020-10-31 15:35 ` Patrick Menschel [this message]
2020-10-31 21:57 ` Drew Fustini
2020-11-01 22:49 ` Drew Fustini
2020-11-02 7:25 ` Marc Kleine-Budde
2020-11-02 8:18 ` Marc Kleine-Budde
[not found] ` <CAPgEAj7LcX3cb+syhtR1i3Uo1XkYYFQ_wDPV8GniaA-YwPk2Hg@mail.gmail.com>
2020-11-02 11:00 ` Marc Kleine-Budde
[not found] ` <CAPgEAj7BTJyiBg4QkKuekYH0zyrA-10dby3Lgb5qj2uiD4ZOYQ@mail.gmail.com>
2020-11-02 14:22 ` mcp251xfd: loopback test on waveshare canfd hat Marc Kleine-Budde
2020-11-02 14:35 ` Drew Fustini
2020-11-02 14:38 ` Marc Kleine-Budde
2020-11-02 17:34 ` mcp251xfd on RPi 5.4 downstream Patrick Menschel
2020-11-02 18:47 ` Patrick Menschel
2020-11-02 18:57 ` Thomas.Kopp
2020-11-02 19:32 ` Patrick Menschel
2020-11-04 18:48 ` Patrick Menschel
2020-11-05 7:15 ` Marc Kleine-Budde
2020-11-05 18:11 ` Patrick Menschel
2020-11-06 9:00 ` Marc Kleine-Budde
2020-11-06 11:31 ` Patrick Menschel
2020-11-06 11:36 ` Marc Kleine-Budde
2020-11-06 11:46 ` Patrick Menschel
2020-11-05 8:08 ` Marc Kleine-Budde
2020-11-05 8:07 ` Marc Kleine-Budde
2020-11-02 7:55 ` Marc Kleine-Budde
2020-11-02 7:26 ` Marc Kleine-Budde
2020-10-26 7:43 ` Marc Kleine-Budde
2020-11-20 12:32 ` Marc Kleine-Budde
[not found] ` <CAEf4M_B68X2T0rkaq0tqahBFPc+Gbvac7-+G0j5jd-g4j+j01g@mail.gmail.com>
2020-11-20 13:16 ` Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3a5f81d6-13ba-71b8-67a7-fe6e8a13f84a@posteo.de \
--to=menschel.p@posteo.de \
--cc=drew@beagleboard.org \
--cc=josh@macchina.cc \
--cc=linux-can@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=socketcan@hartkopp.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox