From: Marc Kleine-Budde <mkl@pengutronix.de>
To: "Eric Bénard" <eric@eukrea.com>
Cc: linux-can@vger.kernel.org, Sascha Hauer <kernel@pengutronix.de>,
Wolfgang Grandegger <wg@grandegger.com>
Subject: Re: [PATCH] can: flexcan: add PM support
Date: Tue, 08 May 2012 17:18:34 +0200 [thread overview]
Message-ID: <4FA9394A.90303@pengutronix.de> (raw)
In-Reply-To: <1336489937-29645-1-git-send-email-eric@eukrea.com>
[-- Attachment #1: Type: text/plain, Size: 2169 bytes --]
On 05/08/2012 05:12 PM, Eric Bénard wrote:
> tested on an i.MX257
What about the transceiver? Does is make sense to switch it off, too?
Marc
> Signed-off-by: Eric Bénard <eric@eukrea.com>
> ---
> drivers/net/can/flexcan.c | 38 ++++++++++++++++++++++++++++++++++++++
> 1 files changed, 38 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
> index 1efb083..0d058b0 100644
> --- a/drivers/net/can/flexcan.c
> +++ b/drivers/net/can/flexcan.c
> @@ -1050,6 +1050,42 @@ static struct of_device_id flexcan_of_match[] = {
> {},
> };
>
> +#ifdef CONFIG_PM
> +static int flexcan_suspend(struct platform_device *pdev, pm_message_t state)
> +{
> + struct net_device *dev = platform_get_drvdata(pdev);
> + struct flexcan_priv *priv = netdev_priv(dev);
> +
> + flexcan_chip_disable(priv);
> +
> + if (netif_running(dev)) {
> + netif_stop_queue(dev);
> + netif_device_detach(dev);
> + }
> + priv->can.state = CAN_STATE_SLEEPING;
> +
> + return 0;
> +}
> +
> +static int flexcan_resume(struct platform_device *pdev)
> +{
> + struct net_device *dev = platform_get_drvdata(pdev);
> + struct flexcan_priv *priv = netdev_priv(dev);
> +
> + priv->can.state = CAN_STATE_ERROR_ACTIVE;
> + if (netif_running(dev)) {
> + netif_device_attach(dev);
> + netif_start_queue(dev);
> + }
> + flexcan_chip_enable(priv);
> +
> + return 0;
> +}
> +#else
> +#define flexcan_suspend NULL
> +#define flexcan_resume NULL
> +#endif
> +
> static struct platform_driver flexcan_driver = {
> .driver = {
> .name = DRV_NAME,
> @@ -1058,6 +1094,8 @@ static struct platform_driver flexcan_driver = {
> },
> .probe = flexcan_probe,
> .remove = __devexit_p(flexcan_remove),
> + .suspend = flexcan_suspend,
> + .resume = flexcan_resume,
> };
>
> module_platform_driver(flexcan_driver);
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]
next prev parent reply other threads:[~2012-05-08 15:18 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-08 15:12 [PATCH] can: flexcan: add PM support Eric Bénard
2012-05-08 15:18 ` Marc Kleine-Budde [this message]
2012-05-08 15:30 ` Eric Bénard
2012-05-08 15:46 ` Marc Kleine-Budde
2012-05-08 17:14 ` Eric Bénard
2012-05-08 17:38 ` Oliver Hartkopp
2012-05-08 18:02 ` Eric Bénard
2012-05-08 18:34 ` Marc Kleine-Budde
2012-05-09 8:16 ` Kurt Van Dijck
2012-05-09 14:35 ` Oliver Hartkopp
2012-05-09 14:53 ` [PATCH] can: trx support Kurt Van Dijck
2012-05-08 19:09 ` [PATCH] can: flexcan: add PM support Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FA9394A.90303@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=eric@eukrea.com \
--cc=kernel@pengutronix.de \
--cc=linux-can@vger.kernel.org \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox