From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marc Kleine-Budde Subject: Re: [PATCH] can: janz-ican3: fix support for CAN_RAW_RECV_OWN_MSGS Date: Wed, 18 Jul 2012 01:09:57 +0200 Message-ID: <5005F0C5.7010109@pengutronix.de> References: <4FFFE3AF.4020907@pengutronix.de> <1342192830-31538-1-git-send-email-iws@ovro.caltech.edu> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="------------enig2278EA3BBFC8D78CE67C02CE" Return-path: Received: from metis.ext.pengutronix.de ([92.198.50.35]:51984 "EHLO metis.ext.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750962Ab2GQXKH (ORCPT ); Tue, 17 Jul 2012 19:10:07 -0400 In-Reply-To: <1342192830-31538-1-git-send-email-iws@ovro.caltech.edu> Sender: linux-can-owner@vger.kernel.org List-ID: To: "Ira W. Snyder" Cc: linux-can@vger.kernel.org This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig2278EA3BBFC8D78CE67C02CE Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable On 07/13/2012 05:20 PM, Ira W. Snyder wrote: > From: "Ira W. Snyder" >=20 > The Janz VMOD-ICAN3 firmware does not support any sort of TX-done > notification or interrupt. The driver previously used the hardware > loopback to attempt to work around this deficiency, but this caused all= > sockets to receive all messages, even if CAN_RAW_RECV_OWN_MSGS is off. >=20 > Using the new function ican3_cmp_echo_skb(), we can drop the loopback > messages and return the original skbs. This fixes the issues with > CAN_RAW_RECV_OWN_MSGS. >=20 > A private skb queue is used to store the echo skbs. This avoids the nee= d > for any index management. >=20 > Signed-off-by: Ira W. Snyder > --- >=20 > This is a squashed together version of the first two patches in the ser= ies. >=20 > drivers/net/can/janz-ican3.c | 156 ++++++++++++++++++++++++++++++++++= +------- > 1 files changed, 130 insertions(+), 26 deletions(-) >=20 > diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.= c > index 08c893c..5fff829 100644 > --- a/drivers/net/can/janz-ican3.c > +++ b/drivers/net/can/janz-ican3.c > @@ -220,6 +220,9 @@ struct ican3_dev { > /* old and new style host interface */ > unsigned int iftype; > =20 > + /* queue for echo packets */ > + struct sk_buff_head echoq; > + > /* > * Any function which changes the current DPM page must hold this > * lock while it is performing data accesses. This ensures that the > @@ -235,7 +238,6 @@ struct ican3_dev { > =20 > /* fast host interface */ > unsigned int fastrx_start; > - unsigned int fastrx_int; > unsigned int fastrx_num; > unsigned int fasttx_start; > unsigned int fasttx_num; > @@ -454,7 +456,6 @@ static void __devinit ican3_init_fast_host_interfac= e(struct ican3_dev *mod) > /* save the start recv page */ > mod->fastrx_start =3D mod->free_page; > mod->fastrx_num =3D 0; > - mod->fastrx_int =3D 0; > =20 > /* build a single fast tohost queue descriptor */ > memset(&desc, 0, sizeof(desc)); > @@ -1091,6 +1092,87 @@ static void ican3_handle_message(struct ican3_de= v *mod, struct ican3_msg *msg) > } > =20 > /* > + * The ican3 needs to store all echo skbs, and therefore cannot > + * use the generic infrastructure for this. > + */ > +static void ican3_put_echo_skb(struct ican3_dev *mod, struct sk_buff *= skb) > +{ > + struct sock *srcsk =3D skb->sk; > + > + if (atomic_read(&skb->users) !=3D 1) { > + struct sk_buff *old_skb =3D skb; > + > + skb =3D skb_clone(old_skb, GFP_ATOMIC); > + kfree_skb(old_skb); > + if (!skb) > + return; > + } else > + skb_orphan(skb); Please use { } on else, too > + > + skb->sk =3D srcsk; > + > + /* save this skb for tx interrupt echo handling */ > + skb_queue_tail(&mod->echoq, skb); > +} > + > +static unsigned int ican3_get_echo_skb(struct ican3_dev *mod) > +{ > + struct sk_buff *skb =3D skb_dequeue(&mod->echoq); > + struct can_frame *cf; > + u8 dlc; > + > + if (!skb) > + return 0; > + > + /* check flag whether this packet has to be looped back */ > + if (!(mod->ndev->flags & IFF_ECHO) || skb->pkt_type !=3D PACKET_LOOPB= ACK) { ^^^^^^^^^^^^^^^^^^^^^^^^^^^ Your flags have a IFF_ECHO, don't they? > + kfree_skb(skb); > + return 0; please return here the dlc here, too. > + } > + > + /* make settings for echo to reduce code in irq context */ > + skb->protocol =3D htons(ETH_P_CAN); > + skb->pkt_type =3D PACKET_BROADCAST; > + skb->ip_summed =3D CHECKSUM_UNNECESSARY; > + skb->dev =3D mod->ndev; > + > + cf =3D (struct can_frame *)skb->data; > + dlc =3D cf->can_dlc; > + netif_receive_skb(skb); > + > + return dlc; > +} > + > +/* > + * Compare an skb with an existing echo skb > + * > + * This function will be used on devices which have a hardware loopbac= k. > + * On these devices, this function can be used to compare a received s= kb > + * with the saved echo skbs so that the hardware echo skb can be dropp= ed. > + * > + * Returns true if the skb's are identical, false otherwise. > + */ > +static bool ican3_cmp_echo_skb(struct ican3_dev *mod, struct sk_buff *= skb) > +{ > + struct can_frame *cf =3D (struct can_frame *)skb->data; > + struct sk_buff *echo_skb =3D skb_peek(&mod->echoq); > + > + if (echo_skb) { > + struct can_frame *echo_cf =3D (struct can_frame *)echo_skb->data; > + > + if (cf->can_id !=3D echo_cf->can_id) > + return false; > + > + if (cf->can_dlc !=3D echo_cf->can_dlc) > + return false; > + > + return memcmp(cf->data, echo_cf->data, cf->can_dlc) =3D=3D 0; > + } Please restructure like this (more common coding style): if (!echo_skb) return false ... > + > + return false; > +} > + > +/* > * Check that there is room in the TX ring to transmit another skb > * > * LOCKING: must hold mod->lock > @@ -1100,6 +1182,10 @@ static bool ican3_txok(struct ican3_dev *mod) > struct ican3_fast_desc __iomem *desc; > u8 control; > =20 > + /* check that we have echo queue space */ > + if (skb_queue_len(&mod->echoq) >=3D ICAN3_TX_BUFFERS) > + return false; > + > /* copy the control bits of the descriptor */ > ican3_set_page(mod, mod->fasttx_start + (mod->fasttx_num / 16)); > desc =3D mod->dpm + ((mod->fasttx_num % 16) * sizeof(*desc)); > @@ -1150,10 +1236,27 @@ static int ican3_recv_skb(struct ican3_dev *mod= ) > /* convert the ICAN3 frame into Linux CAN format */ > ican3_to_can_frame(mod, &desc, cf); > =20 > - /* receive the skb, update statistics */ > - netif_receive_skb(skb); > + /* > + * If this is an ECHO frame received from the hardware loopback > + * feature, use the skb saved in the ECHO stack instead. This allows > + * the Linux CAN core to support CAN_RAW_RECV_OWN_MSGS correctly. > + * > + * Since this is a confirmation of a successfully transmitted packet > + * sent from this host, update the transmit statistics. > + * > + * Also, the netdevice queue needs to be allowed to send packets agai= n. > + */ > + if (ican3_cmp_echo_skb(mod, skb)) { > + stats->tx_packets++; > + stats->tx_bytes +=3D ican3_get_echo_skb(mod); > + kfree_skb(skb); > + goto err_noalloc; > + } > + > + /* update statistics, receive the skb */ > stats->rx_packets++; > stats->rx_bytes +=3D cf->can_dlc; > + netif_receive_skb(skb); > =20 > err_noalloc: > /* toggle the valid bit and return the descriptor to the ring */ > @@ -1176,13 +1279,13 @@ err_noalloc: > static int ican3_napi(struct napi_struct *napi, int budget) > { > struct ican3_dev *mod =3D container_of(napi, struct ican3_dev, napi);= > - struct ican3_msg msg; > unsigned long flags; > int received =3D 0; > int ret; > =20 > /* process all communication messages */ > while (true) { > + struct ican3_msg msg; > ret =3D ican3_recv_msg(mod, &msg); > if (ret) > break; > @@ -1199,11 +1302,6 @@ static int ican3_napi(struct napi_struct *napi, = int budget) > received++; > } > =20 > - /* We have processed all packets that the adapter had, but it > - * was less than our budget, stop polling */ > - if (received < budget) > - napi_complete(napi); > - > spin_lock_irqsave(&mod->lock, flags); > =20 > /* Wake up the transmit queue if necessary */ > @@ -1212,6 +1310,11 @@ static int ican3_napi(struct napi_struct *napi, = int budget) > =20 > spin_unlock_irqrestore(&mod->lock, flags); > =20 > + /* We have processed all packets that the adapter had, but it > + * was less than our budget, stop polling */ Nitpick: preferred multi line commenting style is: /* * comments... * ..more */ > + if (received < budget) > + napi_complete(napi); > + Why are you moving the napi_complete? > /* re-enable interrupt generation */ > iowrite8(1 << mod->num, &mod->ctrl->int_enable); > return received; > @@ -1408,6 +1511,9 @@ static int ican3_stop(struct net_device *ndev) > return ret; > } > =20 > + /* drop all outstanding echo skbs */ > + skb_queue_purge(&mod->echoq); > + > /* close the CAN layer */ > close_candev(ndev); > return 0; > @@ -1416,18 +1522,19 @@ static int ican3_stop(struct net_device *ndev) > static int ican3_xmit(struct sk_buff *skb, struct net_device *ndev) > { > struct ican3_dev *mod =3D netdev_priv(ndev); > - struct net_device_stats *stats =3D &ndev->stats; > struct can_frame *cf =3D (struct can_frame *)skb->data; > struct ican3_fast_desc desc; > void __iomem *desc_addr; > unsigned long flags; > =20 > + if (can_dropped_invalid_skb(ndev, skb)) > + return NETDEV_TX_OK; > + > spin_lock_irqsave(&mod->lock, flags); > =20 > /* check that we can actually transmit */ > if (!ican3_txok(mod)) { > - dev_err(mod->dev, "no free descriptors, stopping queue\n"); > - netif_stop_queue(ndev); > + dev_err(mod->dev, "BUG: no free descriptors\n"); > spin_unlock_irqrestore(&mod->lock, flags); > return NETDEV_TX_BUSY; > } > @@ -1442,6 +1549,14 @@ static int ican3_xmit(struct sk_buff *skb, struc= t net_device *ndev) > can_frame_to_ican3(mod, cf, &desc); > =20 > /* > + * This hardware doesn't have TX-done notifications, so we'll try and= > + * emulate it the best we can using ECHO skbs. Add the skb to the ECH= O > + * stack. Upon packet reception, check if the ECHO skb and received > + * skb match, and use that to wake the queue. > + */ > + ican3_put_echo_skb(mod, skb); > + > + /* > * the programming manual says that you must set the IVALID bit, then= > * interrupt, then set the valid bit. Quite weird, but it seems to be= > * required for this to work > @@ -1459,19 +1574,7 @@ static int ican3_xmit(struct sk_buff *skb, struc= t net_device *ndev) > mod->fasttx_num =3D (desc.control & DESC_WRAP) ? 0 > : (mod->fasttx_num + 1); > =20 > - /* update statistics */ > - stats->tx_packets++; > - stats->tx_bytes +=3D cf->can_dlc; > - kfree_skb(skb); > - > - /* > - * This hardware doesn't have TX-done notifications, so we'll try and= > - * emulate it the best we can using ECHO skbs. Get the next TX > - * descriptor, and see if we have room to send. If not, stop the queu= e. > - * It will be woken when the ECHO skb for the current packet is recv'= d. > - */ > - > - /* copy the control bits of the descriptor */ > + /* if there is no free descriptor space, stop the transmit queue */ > if (!ican3_txok(mod)) > netif_stop_queue(ndev); > =20 > @@ -1667,6 +1770,7 @@ static int __devinit ican3_probe(struct platform_= device *pdev) > mod->dev =3D &pdev->dev; > mod->num =3D pdata->modno; > netif_napi_add(ndev, &mod->napi, ican3_napi, ICAN3_RX_BUFFERS); > + skb_queue_head_init(&mod->echoq); > spin_lock_init(&mod->lock); > init_completion(&mod->termination_comp); > init_completion(&mod->buserror_comp); Marc --=20 Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de | --------------enig2278EA3BBFC8D78CE67C02CE Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAlAF8MoACgkQjTAFq1RaXHO9ZQCcC+Uk9H1Jqwj3ww5+OVS4Vx94 w0MAoJX0Ax4xB6BujZpmT6vezLvoe9gT =chEX -----END PGP SIGNATURE----- --------------enig2278EA3BBFC8D78CE67C02CE--