From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Fabio Baltieri <fabio.baltieri@gmail.com>,
linux-can@vger.kernel.org, linux-kernel@vger.kernel.org,
Oliver Hartkopp <socketcan@hartkopp.net>,
Wolfgang Grandegger <wg@grandegger.com>
Subject: Re: [PATCH can-next v6] can: add tx/rx LED trigger support
Date: Fri, 24 Aug 2012 13:28:16 +0200 [thread overview]
Message-ID: <50376550.4020501@pengutronix.de> (raw)
In-Reply-To: <20120824051016.GB1718@vandijck-laurijssen.be>
[-- Attachment #1: Type: text/plain, Size: 1349 bytes --]
On 08/24/2012 07:10 AM, Kurt Van Dijck wrote:
> Hello,
>
> I find the CAN led triggers an interesting thing.
>
> And then, this scenario fell crossed my mind:
> Imagine I do:
> [insert CAN device: can0]
> $ ip link set can0 name helga
> [insert another CAN device: again 'can0']
>
> Registering 'can0-tx' led trigger will fail for the second CAN device,
> since that led trigger name is already reserved for CAN device 'helga'.
Good point.
> I'm not sure how to fix such.
> If 'rx' & 'tx' may be combined, reusing the netdev name may be possible?
> Just wild thinking ...
I think the device's name (not netdev) is unique in the system and
cannot be changed.
On my device tree enabled mx28 I'm talking about the "80032000.can" in:
> dmesg |grep flexcan
> flexcan 80032000.can: device registered (reg_base=f5032000, irq=8)
> flexcan 80034000.can: device registered (reg_base=f5034000, irq=9)
> $ ls /sys/bus/platform/devices/*can* -d
> /sys/bus/platform/devices/80032000.can
> /sys/bus/platform/devices/80034000.can
regards, Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]
next prev parent reply other threads:[~2012-08-24 11:28 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-30 19:20 [PATCH can-next v3 1/2] can: add tx/rx LED trigger support Fabio Baltieri
2012-07-30 19:20 ` [PATCH can-next v3 2/2] can: flexcan: add " Fabio Baltieri
2012-07-30 21:17 ` [PATCH can-next v3 1/2] can: add tx/rx " Marc Kleine-Budde
2012-07-31 6:57 ` Fabio Baltieri
2012-07-31 7:10 ` Marc Kleine-Budde
2012-07-31 11:57 ` Fabio Baltieri
2012-07-31 12:00 ` Marc Kleine-Budde
2012-07-31 22:05 ` [PATCH can-next v4] " Fabio Baltieri
2012-08-01 9:36 ` Marc Kleine-Budde
2012-08-01 10:07 ` Marc Kleine-Budde
2012-08-01 10:30 ` Fabio Baltieri
2012-08-01 11:37 ` Marc Kleine-Budde
2012-08-01 11:49 ` [PATCH can-next v5 1/2] " Fabio Baltieri
2012-08-01 11:49 ` [PATCH can-next v5 2/2] can: flexcan: add " Fabio Baltieri
2012-08-01 11:53 ` Marc Kleine-Budde
2012-08-01 12:24 ` Fabio Baltieri
2012-08-01 12:30 ` Marc Kleine-Budde
2012-08-01 21:02 ` Marc Kleine-Budde
2012-08-01 11:59 ` [PATCH can-next v5 1/2] can: add tx/rx " Marc Kleine-Budde
2012-08-01 12:06 ` Oliver Hartkopp
2012-08-01 12:18 ` Marc Kleine-Budde
2012-08-01 18:21 ` [PATCH can-next v6] " Fabio Baltieri
2012-08-01 21:00 ` Marc Kleine-Budde
2012-08-01 22:38 ` Fabio Baltieri
2012-08-01 21:05 ` Oliver Hartkopp
2012-08-24 5:10 ` Kurt Van Dijck
2012-08-24 11:28 ` Marc Kleine-Budde [this message]
2012-08-24 12:42 ` Kurt Van Dijck
2012-08-24 22:01 ` Fabio Baltieri
2012-08-25 20:25 ` Kurt Van Dijck
2012-09-03 12:40 ` Marc Kleine-Budde
2012-09-03 18:13 ` Kurt Van Dijck
2012-09-03 18:29 ` Fabio Baltieri
2012-09-03 20:54 ` Oliver Hartkopp
2012-09-04 7:11 ` Kurt Van Dijck
2012-09-04 9:29 ` [PATCH] can: rename LED trigger name on netdev renames Kurt Van Dijck
2012-09-06 18:59 ` Fabio Baltieri
2012-09-06 19:31 ` Oliver Hartkopp
2012-09-06 20:46 ` Fabio Baltieri
2012-09-07 7:19 ` Kurt Van Dijck
2012-09-09 16:17 ` [PATCH v2] " Fabio Baltieri
2012-09-10 14:25 ` [PATCH] can: export a safe netdev_priv wrapper for candev Kurt Van Dijck
2012-09-10 18:22 ` Oliver Hartkopp
2012-09-10 18:29 ` Fabio Baltieri
2012-09-10 19:55 ` [PATCH v2] " Kurt Van Dijck
2012-09-10 14:28 ` [PATCH v3] can: rename LED trigger name on netdev renames Kurt Van Dijck
2012-09-10 18:25 ` Oliver Hartkopp
2012-09-10 18:40 ` Fabio Baltieri
2012-09-10 19:01 ` Oliver Hartkopp
2012-09-10 20:08 ` Kurt Van Dijck
2012-09-11 5:42 ` Oliver Hartkopp
2012-09-11 7:13 ` Fabio Baltieri
2012-09-12 7:22 ` Kurt Van Dijck
2012-09-11 8:05 ` Kurt Van Dijck
2012-09-10 20:06 ` [PATCH v4] " Kurt Van Dijck
2012-09-11 21:04 ` Fabio Baltieri
2012-09-04 20:15 ` [PATCH can-next v6] can: add tx/rx LED trigger support Fabio Baltieri
2012-09-06 10:33 ` Kurt Van Dijck
2012-09-06 11:17 ` Fabio Baltieri
2012-09-06 15:11 ` Kurt Van Dijck
2012-09-06 20:57 ` Fabio Baltieri
2012-09-07 7:04 ` Kurt Van Dijck
2012-09-07 18:59 ` Fabio Baltieri
2012-07-31 8:46 ` [PATCH can-next v3 1/2] " Wolfgang Grandegger
2012-07-31 10:12 ` Marc Kleine-Budde
2012-07-31 11:55 ` Fabio Baltieri
2012-07-31 12:14 ` Fabio Baltieri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50376550.4020501@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=fabio.baltieri@gmail.com \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=socketcan@hartkopp.net \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).