* Re: [PATCH] CAN: sja1000: Add support for Connect Tech Inc's Canpro/104-Plus Opto CAN board [not found] <02ac01cdabe1$b5403e10$1fc0ba30$@connecttech.com> @ 2012-10-17 10:13 ` Marc Kleine-Budde 2012-10-17 18:42 ` Muhammad Ghias 0 siblings, 1 reply; 2+ messages in thread From: Marc Kleine-Budde @ 2012-10-17 10:13 UTC (permalink / raw) To: Muhammad Ghias Cc: 'Wolfgang Grandegger', linux-kernel, linux-can@vger.kernel.org [-- Attachment #1: Type: text/plain, Size: 909 bytes --] On 10/16/2012 11:03 PM, Muhammad Ghias wrote: > Patch adds support for CANpro/104-Plus Opto CAN board. Board uses PLX9030 > bridge and two NXP SJA1000 CAN controllers. Patch is generated and tested > with kernel 3.6.1. > > If you have any questions or any feedback please let me know. Thanks, the code looks good. Please try, if possible, to send your patches via git send-email, as outlooks messed up the patch. I've fixed all line wrapping problems by hand, applied the patch and send a v2, please test. regards, Marc P.S.: Please use the linux-can@vger.kernel.org mailing list for CAN related patches/topics. -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de | [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 259 bytes --] ^ permalink raw reply [flat|nested] 2+ messages in thread
* RE: [PATCH] CAN: sja1000: Add support for Connect Tech Inc's Canpro/104-Plus Opto CAN board 2012-10-17 10:13 ` [PATCH] CAN: sja1000: Add support for Connect Tech Inc's Canpro/104-Plus Opto CAN board Marc Kleine-Budde @ 2012-10-17 18:42 ` Muhammad Ghias 0 siblings, 0 replies; 2+ messages in thread From: Muhammad Ghias @ 2012-10-17 18:42 UTC (permalink / raw) To: 'Marc Kleine-Budde' Cc: 'Wolfgang Grandegger', linux-kernel, linux-can Hi Marc, I tested the patch v2 with kernel 3.6.1 and 3.7-rc1. Clean compile and works with hardware. Regards, Muhammad -----Original Message----- From: Marc Kleine-Budde [mailto:mkl@pengutronix.de] Sent: October-17-12 6:13 AM To: Muhammad Ghias Cc: 'Wolfgang Grandegger'; linux-kernel@vger.kernel.org; linux-can@vger.kernel.org Subject: Re: [PATCH] CAN: sja1000: Add support for Connect Tech Inc's Canpro/104-Plus Opto CAN board On 10/16/2012 11:03 PM, Muhammad Ghias wrote: > Patch adds support for CANpro/104-Plus Opto CAN board. Board uses PLX9030 > bridge and two NXP SJA1000 CAN controllers. Patch is generated and tested > with kernel 3.6.1. > > If you have any questions or any feedback please let me know. Thanks, the code looks good. Please try, if possible, to send your patches via git send-email, as outlooks messed up the patch. I've fixed all line wrapping problems by hand, applied the patch and send a v2, please test. regards, Marc P.S.: Please use the linux-can@vger.kernel.org mailing list for CAN related patches/topics. -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de | ^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-10-17 18:42 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <02ac01cdabe1$b5403e10$1fc0ba30$@connecttech.com>
2012-10-17 10:13 ` [PATCH] CAN: sja1000: Add support for Connect Tech Inc's Canpro/104-Plus Opto CAN board Marc Kleine-Budde
2012-10-17 18:42 ` Muhammad Ghias
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).