From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Sven Schuchmann" Subject: flexcan: use hardware timestamp Date: Mon, 29 Apr 2013 19:33:39 +0200 Message-ID: <517ECB130200000100098502@mail.schleissheimer.de> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: Received: from mail.schleissheimer.de ([62.153.209.162]:51577 "EHLO mail.schleissheimer.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757275Ab3D2RmB (ORCPT ); Mon, 29 Apr 2013 13:42:01 -0400 Received: from berlix.schleissheimer.de ([192.168.1.187]:51799 helo=mail.schleissheimer.de) by mail.schleissheimer.de with esmtp (Exim 4.76) (envelope-from ) id 1UWrxO-0001Sf-1Z for linux-can@vger.kernel.org; Mon, 29 Apr 2013 19:33:42 +0200 Content-Disposition: inline Sender: linux-can-owner@vger.kernel.org List-ID: To: linux-can@vger.kernel.org Hello, I was wondering if the flexcan driver uses the hardware timestamp and by looking at the code under drivers/net/can/flexcan.c and did not find any access to those registers. is there a special reason for this? If not, I would try implementing to use skb_shared_hwtstamps... Best Regards, Sven