From: Oliver Hartkopp <socketcan@hartkopp.net>
To: Wolfgang Grandegger <wg@grandegger.com>
Cc: Austin Schuh <austin@peloton-tech.com>,
Pavel Pisa <pisa@cmp.felk.cvut.cz>,
linux-can@vger.kernel.org
Subject: Re: sja1000 interrupt problem
Date: Wed, 11 Dec 2013 17:59:54 +0100 [thread overview]
Message-ID: <52A89A0A.7010803@hartkopp.net> (raw)
In-Reply-To: <52A783B2.5020002@grandegger.com>
Bad news.
Unfortunately the patch did not have the wanted effect and the interrupt #19
dropped again the late evening.
I'm currently running the setup overnight with the same kernel but only
without -rt to make sure it definitely is a -rt issue.
On 10.12.2013 22:12, Wolfgang Grandegger wrote:
>>
>> for (i = 0; i < channels; i++) {
>> +
>
> Please do not add unrelated changes.
>
Was not intended. I added/removed some code here ...
>
> BTW: while browsing Austin's function trace I realized that we do access
> also the inactive device if interrupts are shared. I think we should use
> a shadow register variable for SJA1000_IR. Hope to find some time over
> the weekend to provide a patch.
??
AFAIK the interrupt is registered in sja1000_open (=> ifconfig up).
So why do we access an inactive (ifconfig down) device then?
Regards,
Oliver
next prev parent reply other threads:[~2013-12-11 16:59 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-08 0:47 sja1000 interrupt problem Austin Schuh
2013-10-08 6:32 ` Wolfgang Grandegger
2013-10-08 6:58 ` Oliver Hartkopp
2013-10-08 18:48 ` Austin Schuh
2013-10-08 19:44 ` Wolfgang Grandegger
2013-10-08 20:47 ` Austin Schuh
2013-10-09 6:21 ` Wolfgang Grandegger
2013-10-09 6:31 ` Wolfgang Grandegger
2013-10-09 6:47 ` Wolfgang Grandegger
[not found] ` <CANGgnMZpPGctUWGcg7Lp-QFPc7d6A5GeL9KQYnpeYMR8WukgdA@mail.gmail.com>
2013-11-07 8:15 ` Wolfgang Grandegger
2013-11-07 23:43 ` Austin Schuh
2013-11-09 14:21 ` Oliver Hartkopp
2013-11-12 2:59 ` Austin Schuh
2013-11-12 21:26 ` Oliver Hartkopp
2013-11-12 23:22 ` Austin Schuh
2013-11-13 3:41 ` Austin Schuh
2013-11-13 6:58 ` Oliver Hartkopp
2013-11-13 9:48 ` Kurt Van Dijck
2013-11-13 6:44 ` Oliver Hartkopp
2013-11-13 8:11 ` Wolfgang Grandegger
2013-11-13 9:08 ` Pavel Pisa
2013-11-13 9:52 ` Wolfgang Grandegger
2013-11-13 18:41 ` Oliver Hartkopp
2013-11-13 19:29 ` Wolfgang Grandegger
2013-11-13 22:00 ` Oliver Hartkopp
2013-11-13 11:02 ` Kurt Van Dijck
2013-11-16 21:42 ` Oliver Hartkopp
2013-11-17 8:18 ` Wolfgang Grandegger
2013-11-17 14:27 ` Oliver Hartkopp
2013-11-17 17:23 ` Wolfgang Grandegger
2013-11-17 20:46 ` Wolfgang Grandegger
2013-11-18 17:08 ` Austin Schuh
2013-12-09 21:54 ` Austin Schuh
2013-12-09 21:54 ` Austin Schuh
2013-12-10 7:49 ` Wolfgang Grandegger
2013-12-10 8:05 ` Austin Schuh
2013-12-10 9:32 ` Wolfgang Grandegger
2013-12-10 13:47 ` Oliver Hartkopp
2013-12-10 14:23 ` Oliver Hartkopp
2013-12-10 14:41 ` Wolfgang Grandegger
2013-12-10 16:05 ` Oliver Hartkopp
2013-12-10 21:12 ` Wolfgang Grandegger
2013-12-11 16:59 ` Oliver Hartkopp [this message]
2013-12-11 19:27 ` Wolfgang Grandegger
2013-12-12 6:13 ` Oliver Hartkopp
2013-12-12 17:38 ` Oliver Hartkopp
2013-12-12 22:56 ` Wolfgang Grandegger
2013-12-13 0:07 ` Austin Schuh
2013-12-13 16:16 ` Oliver Hartkopp
2013-12-13 9:38 ` Oliver Hartkopp
2013-12-13 10:04 ` Wolfgang Grandegger
2013-12-13 10:09 ` Wolfgang Grandegger
2013-12-13 16:25 ` Oliver Hartkopp
2013-12-13 17:33 ` Wolfgang Grandegger
2013-12-13 10:07 ` Marc Kleine-Budde
2013-12-13 16:22 ` Oliver Hartkopp
2013-12-13 17:14 ` Oliver Hartkopp
2013-12-13 21:14 ` Oliver Hartkopp
2013-12-14 9:51 ` Oliver Hartkopp
2013-12-20 23:13 ` Austin Schuh
2013-12-21 8:29 ` Wolfgang Grandegger
2013-12-21 13:12 ` Oliver Hartkopp
2013-12-21 12:55 ` Oliver Hartkopp
2013-12-23 15:58 ` Oliver Hartkopp
2013-11-09 19:42 ` Wolfgang Grandegger
[not found] ` <CANGgnMbb+VResUC6h+cK6Hfe5PLJx9R9ao6bMdJM2e5BPaDamw@mail.gmail.com>
2013-11-12 22:15 ` Wolfgang Grandegger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52A89A0A.7010803@hartkopp.net \
--to=socketcan@hartkopp.net \
--cc=austin@peloton-tech.com \
--cc=linux-can@vger.kernel.org \
--cc=pisa@cmp.felk.cvut.cz \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).