[PATCH] can: sja1000: add support for Elcus CAN200PCI

[Oleg Moroz <oleg.moroz@mcc.vniiem.ru>]

This patch adds support for Elcus CAN200PCI card.

Signed-off-by: Oleg Moroz<oleg.moroz@mcc.vniiem.ru>

---

diff -u a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c
--- a/drivers/net/can/sja1000/plx_pci.c
+++ b/drivers/net/can/sja1000/plx_pci.c
@@ -45,7 +45,8 @@ MODULE_SUPPORTED_DEVICE("Adlink PCI-7841
  			"esd CAN-PCI/PMC/266, "
  			"esd CAN-PCIe/2000, "
  			"Connect Tech Inc. CANpro/104-Plus Opto (CRG001), "
-			"IXXAT PC-I 04/PCI")
+			"IXXAT PC-I 04/PCI, "
+			"ELCUS CAN-200-PCI")
  MODULE_LICENSE("GPL v2");
  
  #define PLX_PCI_MAX_CHAN 2
@@ -123,6 +124,11 @@ struct plx_pci_card {
  #define ESD_PCI_SUB_SYS_ID_PCIE2000	0x0200
  #define ESD_PCI_SUB_SYS_ID_PCI104200	0x0501
  
+#define CAN200PCI_DEVICE_ID		0x9030
+#define CAN200PCI_VENDOR_ID		0x10b5
+#define CAN200PCI_SUB_DEVICE_ID		0x0301
+#define CAN200PCI_SUB_VENDOR_ID		0xe1c5
+
  #define IXXAT_PCI_VENDOR_ID		0x10b5
  #define IXXAT_PCI_DEVICE_ID		0x9050
  #define IXXAT_PCI_SUB_SYS_ID		0x2540
@@ -234,6 +240,14 @@ static struct plx_pci_card_info plx_pci_
  	/* based on PLX9030 */
  };
  
+static struct plx_pci_card_info plx_pci_card_info_elcus = {
+	"Eclus CAN-200-PCI", 2,
+	PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
+	{1, 0x00, 0x00}, { {2, 0x00, 0x80}, {3, 0x00, 0x80} },
+	&plx_pci_reset_common
+	/* based on PLX9030 */
+};
+
  static DEFINE_PCI_DEVICE_TABLE(plx_pci_tbl) = {
  	{
  		/* Adlink PCI-7841/cPCI-7841 */
@@ -319,6 +333,13 @@ static DEFINE_PCI_DEVICE_TABLE(plx_pci_t
  		0, 0,
  		(kernel_ulong_t)&plx_pci_card_info_cti
  	},
+	{
+		/* Elcus CAN-200-PCI */
+		CAN200PCI_VENDOR_ID, CAN200PCI_DEVICE_ID,
+		CAN200PCI_SUB_VENDOR_ID, CAN200PCI_SUB_DEVICE_ID,
+		0, 0,
+		(kernel_ulong_t)&plx_pci_card_info_elcus
+	},
  	{ 0,}
  };
  MODULE_DEVICE_TABLE(pci, plx_pci_tbl);