[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.0-rc4+ (zampar@zampar-dell) (gcc version 4.7.3 (Buildroot 2014.02-rc2-00081-g5ec4f42) ) #3 Wed Feb 26 09:43:30 BRT 2014 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine model: MyMachine [ 0.000000] Memory policy: Data cache writeback [ 0.000000] AT91: Detected soc type: at91sam9x5 [ 0.000000] AT91: Detected soc subtype: at91sam9g25 [ 0.000000] AT91: sram at 0x300000 of 0x8000 mapped at 0xfef70000 [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] free_area_init_node: node 0, pgdat c04d81a4, node_mem_map c7efa000 [ 0.000000] Normal zone: 256 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] Clocks: CPU 400 MHz, master 133 MHz, main 12.000 MHz [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk root=/dev/nfs rw nfsroot=10.185.5.4:/work/nfs ip=10.185.5.102 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 124660K/131072K available (3548K kernel code, 170K rwdata, 1068K rodata, 138K init, 217K bss, 6412K reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc048a430 (4618 kB) [ 0.000000] .init : 0xc048b000 - 0xc04ad84c ( 139 kB) [ 0.000000] .data : 0xc04ae000 - 0xc04d8900 ( 171 kB) [ 0.000000] .bss : 0xc04d8900 - 0xc050ef94 ( 218 kB) [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] sched_clock: 32 bits at 128 Hz, resolution 7812500ns, wraps every 16777216000000000ns [ 0.000000] Console: colour dummy device 80x30 [ 0.054687] Calibrating delay loop... 198.76 BogoMIPS (lpj=775168) [ 0.054687] pid_max: default: 32768 minimum: 301 [ 0.062500] Mount-cache hash table entries: 512 [ 0.070312] CPU: Testing write buffer coherency: ok [ 0.070312] Setting up static identity map for 0x2035c910 - 0x2035c968 [ 0.070312] devtmpfs: initialized [ 0.070312] device: 'platform': device_add [ 0.070312] PM: Adding info for No Bus:platform [ 0.070312] bus: 'platform': registered [ 0.070312] bus: 'cpu': registered [ 0.070312] device: 'cpu': device_add [ 0.078125] PM: Adding info for No Bus:cpu [ 0.078125] bus: 'container': registered [ 0.078125] device: 'container': device_add [ 0.078125] PM: Adding info for No Bus:container [ 0.078125] bus: 'workqueue': registered [ 0.078125] device: 'workqueue': device_add [ 0.078125] PM: Adding info for No Bus:workqueue [ 0.078125] pinctrl core: initialized pinctrl subsystem [ 0.078125] NET: Registered protocol family 16 [ 0.078125] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.078125] device class 'bdi': registering [ 0.078125] device class 'gpio': registering [ 0.078125] device class 'tty': registering [ 0.078125] device class 'vtconsole': registering [ 0.078125] device: 'vtcon0': device_add [ 0.078125] PM: Adding info for No Bus:vtcon0 [ 0.085937] bus: 'spi': registered [ 0.085937] device class 'spi_master': registering [ 0.085937] bus: 'i2c': registered [ 0.085937] bus: 'i2c': add driver dummy [ 0.085937] device: 'ahb.0': device_add [ 0.085937] bus: 'platform': add device ahb.0 [ 0.085937] PM: Adding info for platform:ahb.0 [ 0.085937] device: 'apb.1': device_add [ 0.085937] bus: 'platform': add device apb.1 [ 0.085937] PM: Adding info for platform:apb.1 [ 0.085937] device: 'fffff000.interrupt-controller': device_add [ 0.085937] bus: 'platform': add device fffff000.interrupt-controller [ 0.085937] PM: Adding info for platform:fffff000.interrupt-controller [ 0.085937] device: 'ffffe800.ramc': device_add [ 0.085937] bus: 'platform': add device ffffe800.ramc [ 0.085937] PM: Adding info for platform:ffffe800.ramc [ 0.085937] device: 'fffffc00.pmc': device_add [ 0.085937] bus: 'platform': add device fffffc00.pmc [ 0.085937] PM: Adding info for platform:fffffc00.pmc [ 0.085937] device: 'fffffe00.rstc': device_add [ 0.085937] bus: 'platform': add device fffffe00.rstc [ 0.085937] PM: Adding info for platform:fffffe00.rstc [ 0.085937] device: 'fffffe10.shdwc': device_add [ 0.085937] bus: 'platform': add device fffffe10.shdwc [ 0.085937] PM: Adding info for platform:fffffe10.shdwc [ 0.085937] device: 'fffffe30.timer': device_add [ 0.085937] bus: 'platform': add device fffffe30.timer [ 0.085937] PM: Adding info for platform:fffffe30.timer [ 0.093750] device: 'f8008000.timer': device_add [ 0.093750] bus: 'platform': add device f8008000.timer [ 0.093750] PM: Adding info for platform:f8008000.timer [ 0.093750] device: 'f800c000.timer': device_add [ 0.093750] bus: 'platform': add device f800c000.timer [ 0.093750] PM: Adding info for platform:f800c000.timer [ 0.093750] device: 'ffffec00.dma-controller': device_add [ 0.093750] bus: 'platform': add device ffffec00.dma-controller [ 0.093750] PM: Adding info for platform:ffffec00.dma-controller [ 0.093750] device: 'ffffee00.dma-controller': device_add [ 0.093750] bus: 'platform': add device ffffee00.dma-controller [ 0.093750] PM: Adding info for platform:ffffee00.dma-controller [ 0.093750] device: 'pinctrl.2': device_add [ 0.093750] bus: 'platform': add device pinctrl.2 [ 0.093750] PM: Adding info for platform:pinctrl.2 [ 0.093750] device: 'fffff400.gpio': device_add [ 0.093750] bus: 'platform': add device fffff400.gpio [ 0.093750] PM: Adding info for platform:fffff400.gpio [ 0.093750] device: 'fffff600.gpio': device_add [ 0.093750] bus: 'platform': add device fffff600.gpio [ 0.093750] PM: Adding info for platform:fffff600.gpio [ 0.093750] device: 'fffff800.gpio': device_add [ 0.093750] bus: 'platform': add device fffff800.gpio [ 0.093750] PM: Adding info for platform:fffff800.gpio [ 0.101562] device: 'fffffa00.gpio': device_add [ 0.101562] bus: 'platform': add device fffffa00.gpio [ 0.101562] PM: Adding info for platform:fffffa00.gpio [ 0.101562] device: 'f0008000.mmc': device_add [ 0.101562] bus: 'platform': add device f0008000.mmc [ 0.101562] PM: Adding info for platform:f0008000.mmc [ 0.101562] device: 'fffff200.serial': device_add [ 0.101562] bus: 'platform': add device fffff200.serial [ 0.101562] PM: Adding info for platform:fffff200.serial [ 0.101562] device: 'f8010000.i2c': device_add [ 0.101562] bus: 'platform': add device f8010000.i2c [ 0.101562] PM: Adding info for platform:f8010000.i2c [ 0.101562] device: 'f8014000.i2c': device_add [ 0.101562] bus: 'platform': add device f8014000.i2c [ 0.101562] PM: Adding info for platform:f8014000.i2c [ 0.101562] device: 'f804c000.adc': device_add [ 0.101562] bus: 'platform': add device f804c000.adc [ 0.101562] PM: Adding info for platform:f804c000.adc [ 0.101562] device: 'f0000000.spi': device_add [ 0.101562] bus: 'platform': add device f0000000.spi [ 0.101562] PM: Adding info for platform:f0000000.spi [ 0.101562] device: 'fffffeb0.rtc': device_add [ 0.101562] bus: 'platform': add device fffffeb0.rtc [ 0.101562] PM: Adding info for platform:fffffeb0.rtc [ 0.101562] device: 'f802c000.ethernet': device_add [ 0.101562] bus: 'platform': add device f802c000.ethernet [ 0.109375] PM: Adding info for platform:f802c000.ethernet [ 0.109375] device: '40000000.nand': device_add [ 0.109375] bus: 'platform': add device 40000000.nand [ 0.109375] PM: Adding info for platform:40000000.nand [ 0.109375] device: '600000.ohci': device_add [ 0.109375] bus: 'platform': add device 600000.ohci [ 0.109375] PM: Adding info for platform:600000.ohci [ 0.109375] device: '700000.ehci': device_add [ 0.109375] bus: 'platform': add device 700000.ehci [ 0.109375] PM: Adding info for platform:700000.ehci [ 0.109375] device: 'leds.3': device_add [ 0.109375] bus: 'platform': add device leds.3 [ 0.109375] PM: Adding info for platform:leds.3 [ 0.109375] device: 'gpio_keys.4': device_add [ 0.109375] bus: 'platform': add device gpio_keys.4 [ 0.109375] PM: Adding info for platform:gpio_keys.4 [ 0.109375] device: 'onewire.5': device_add [ 0.109375] bus: 'platform': add device onewire.5 [ 0.109375] PM: Adding info for platform:onewire.5 [ 0.109375] No ATAGs? [ 0.109375] AT91: Power Management [ 0.109375] Registering platform device 'cpuidle-at91.0'. Parent at platform [ 0.109375] device: 'cpuidle-at91.0': device_add [ 0.109375] bus: 'platform': add device cpuidle-at91.0 [ 0.109375] PM: Adding info for platform:cpuidle-at91.0 [ 0.109375] AT91: Starting after power-restored wakeup [ 0.109375] bus: 'platform': add driver gpio-at91 [ 0.109375] bus: 'platform': driver_probe_device: matched device fffff400.gpio with driver gpio-at91 [ 0.109375] bus: 'platform': really_probe: probing driver gpio-at91 with device fffff400.gpio [ 0.109375] gpio-at91 fffff400.gpio: no default pinctrl state [ 0.109375] device: 'gpiochip0': device_add [ 0.109375] PM: Adding info for No Bus:gpiochip0 [ 0.109375] gpio-at91 fffff400.gpio: at address fefff400 [ 0.117187] driver: 'fffff400.gpio': driver_bound: bound to device 'gpio-at91' [ 0.117187] bus: 'platform': really_probe: bound device fffff400.gpio to driver gpio-at91 [ 0.117187] bus: 'platform': driver_probe_device: matched device fffff600.gpio with driver gpio-at91 [ 0.117187] bus: 'platform': really_probe: probing driver gpio-at91 with device fffff600.gpio [ 0.117187] gpio-at91 fffff600.gpio: no default pinctrl state [ 0.117187] device: 'gpiochip32': device_add [ 0.117187] PM: Adding info for No Bus:gpiochip32 [ 0.117187] gpio-at91 fffff600.gpio: at address fefff600 [ 0.117187] driver: 'fffff600.gpio': driver_bound: bound to device 'gpio-at91' [ 0.117187] bus: 'platform': really_probe: bound device fffff600.gpio to driver gpio-at91 [ 0.117187] bus: 'platform': driver_probe_device: matched device fffff800.gpio with driver gpio-at91 [ 0.117187] bus: 'platform': really_probe: probing driver gpio-at91 with device fffff800.gpio [ 0.117187] gpio-at91 fffff800.gpio: no default pinctrl state [ 0.117187] device: 'gpiochip64': device_add [ 0.117187] PM: Adding info for No Bus:gpiochip64 [ 0.117187] gpio-at91 fffff800.gpio: at address fefff800 [ 0.117187] driver: 'fffff800.gpio': driver_bound: bound to device 'gpio-at91' [ 0.117187] bus: 'platform': really_probe: bound device fffff800.gpio to driver gpio-at91 [ 0.117187] bus: 'platform': driver_probe_device: matched device fffffa00.gpio with driver gpio-at91 [ 0.117187] bus: 'platform': really_probe: probing driver gpio-at91 with device fffffa00.gpio [ 0.117187] gpio-at91 fffffa00.gpio: no default pinctrl state [ 0.117187] device: 'gpiochip96': device_add [ 0.117187] PM: Adding info for No Bus:gpiochip96 [ 0.117187] gpio-at91 fffffa00.gpio: at address fefffa00 [ 0.117187] driver: 'fffffa00.gpio': driver_bound: bound to device 'gpio-at91' [ 0.117187] bus: 'platform': really_probe: bound device fffffa00.gpio to driver gpio-at91 [ 0.117187] bus: 'platform': add driver pinctrl-at91 [ 0.117187] bus: 'platform': driver_probe_device: matched device pinctrl.2 with driver pinctrl-at91 [ 0.117187] bus: 'platform': really_probe: probing driver pinctrl-at91 with device pinctrl.2 [ 0.117187] pinctrl-at91 pinctrl.2: no default pinctrl state [ 0.117187] pinctrl-at91 pinctrl.2: initialized AT91 pinctrl driver [ 0.117187] driver: 'pinctrl.2': driver_bound: bound to device 'pinctrl-at91' [ 0.117187] bus: 'platform': really_probe: bound device pinctrl.2 to driver pinctrl-at91 [ 0.117187] device class 'dma': registering [ 0.117187] bus: 'platform': add driver atmel_tcb [ 0.125000] bus: 'platform': driver_probe_device: matched device f8008000.timer with driver atmel_tcb [ 0.125000] bus: 'platform': really_probe: probing driver atmel_tcb with device f8008000.timer [ 0.125000] atmel_tcb f8008000.timer: no default pinctrl state [ 0.125000] driver: 'f8008000.timer': driver_bound: bound to device 'atmel_tcb' [ 0.125000] bus: 'platform': really_probe: bound device f8008000.timer to driver atmel_tcb [ 0.125000] bus: 'platform': driver_probe_device: matched device f800c000.timer with driver atmel_tcb [ 0.125000] bus: 'platform': really_probe: probing driver atmel_tcb with device f800c000.timer [ 0.125000] atmel_tcb f800c000.timer: no default pinctrl state [ 0.125000] driver: 'f800c000.timer': driver_bound: bound to device 'atmel_tcb' [ 0.125000] bus: 'platform': really_probe: bound device f800c000.timer to driver atmel_tcb [ 0.125000] tcb_clksrc: tc0 at 16.166 MHz [ 0.125000] device: 'cpu0': device_add [ 0.125000] bus: 'cpu': add device cpu0 [ 0.125000] PM: Adding info for cpu:cpu0 [ 0.179687] device: 'writeback': device_add [ 0.179687] bus: 'workqueue': add device writeback [ 0.179687] PM: Adding info for workqueue:writeback [ 0.179687] device: 'default': device_add [ 0.179687] PM: Adding info for No Bus:default [ 0.179687] bio: create slab at 0 [ 0.179687] device class 'block': registering [ 0.179687] bus: 'platform': add driver at_hdmac [ 0.179687] bus: 'platform': driver_probe_device: matched device ffffec00.dma-controller with driver at_hdmac [ 0.179687] bus: 'platform': really_probe: probing driver at_hdmac with device ffffec00.dma-controller [ 0.179687] at_hdmac ffffec00.dma-controller: no default pinctrl state [ 0.179687] at_hdmac ffffec00.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels [ 0.179687] device: 'dma0chan0': device_add [ 0.179687] PM: Adding info for No Bus:dma0chan0 [ 0.179687] device: 'dma0chan1': device_add [ 0.179687] PM: Adding info for No Bus:dma0chan1 [ 0.179687] device: 'dma0chan2': device_add [ 0.179687] PM: Adding info for No Bus:dma0chan2 [ 0.179687] device: 'dma0chan3': device_add [ 0.179687] PM: Adding info for No Bus:dma0chan3 [ 0.179687] device: 'dma0chan4': device_add [ 0.179687] PM: Adding info for No Bus:dma0chan4 [ 0.187500] device: 'dma0chan5': device_add [ 0.187500] PM: Adding info for No Bus:dma0chan5 [ 0.187500] device: 'dma0chan6': device_add [ 0.187500] PM: Adding info for No Bus:dma0chan6 [ 0.187500] device: 'dma0chan7': device_add [ 0.187500] PM: Adding info for No Bus:dma0chan7 [ 0.187500] driver: 'ffffec00.dma-controller': driver_bound: bound to device 'at_hdmac' [ 0.187500] bus: 'platform': really_probe: bound device ffffec00.dma-controller to driver at_hdmac [ 0.187500] bus: 'platform': driver_probe_device: matched device ffffee00.dma-controller with driver at_hdmac [ 0.187500] bus: 'platform': really_probe: probing driver at_hdmac with device ffffee00.dma-controller [ 0.187500] at_hdmac ffffee00.dma-controller: no default pinctrl state [ 0.187500] at_hdmac ffffee00.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels [ 0.187500] device: 'dma1chan0': device_add [ 0.187500] PM: Adding info for No Bus:dma1chan0 [ 0.187500] device: 'dma1chan1': device_add [ 0.187500] PM: Adding info for No Bus:dma1chan1 [ 0.187500] device: 'dma1chan2': device_add [ 0.187500] PM: Adding info for No Bus:dma1chan2 [ 0.187500] device: 'dma1chan3': device_add [ 0.187500] PM: Adding info for No Bus:dma1chan3 [ 0.187500] device: 'dma1chan4': device_add [ 0.187500] PM: Adding info for No Bus:dma1chan4 [ 0.187500] device: 'dma1chan5': device_add [ 0.187500] PM: Adding info for No Bus:dma1chan5 [ 0.187500] device: 'dma1chan6': device_add [ 0.187500] PM: Adding info for No Bus:dma1chan6 [ 0.195312] device: 'dma1chan7': device_add [ 0.195312] PM: Adding info for No Bus:dma1chan7 [ 0.195312] driver: 'ffffee00.dma-controller': driver_bound: bound to device 'at_hdmac' [ 0.195312] bus: 'platform': really_probe: bound device ffffee00.dma-controller to driver at_hdmac [ 0.195312] device class 'misc': registering [ 0.195312] device class 'scsi_host': registering [ 0.195312] bus: 'scsi': registered [ 0.195312] device class 'scsi_device': registering [ 0.195312] SCSI subsystem initialized [ 0.195312] device class 'mdio_bus': registering [ 0.195312] bus: 'mdio_bus': registered [ 0.195312] bus: 'mdio_bus': add driver Generic PHY [ 0.195312] bus: 'mdio_bus': add driver Generic 10G PHY [ 0.203125] bus: 'usb': registered [ 0.203125] bus: 'usb': add driver usbfs [ 0.203125] usbcore: registered new interface driver usbfs [ 0.203125] bus: 'usb': add driver hub [ 0.203125] usbcore: registered new interface driver hub [ 0.203125] bus: 'usb': add driver usb [ 0.203125] usbcore: registered new device driver usb [ 0.203125] device class 'input': registering [ 0.203125] device class 'rtc': registering [ 0.203125] bus: 'platform': add driver at91_i2c [ 0.203125] bus: 'platform': driver_probe_device: matched device f8010000.i2c with driver at91_i2c [ 0.203125] bus: 'platform': really_probe: probing driver at91_i2c with device f8010000.i2c [ 0.203125] at91_i2c f8010000.i2c: no sleep pinctrl state [ 0.203125] at91_i2c f8010000.i2c: no idle pinctrl state [ 0.203125] at91_i2c f8010000.i2c: using dma0chan0 (tx) and dma0chan1 (rx) for DMA transfers [ 0.203125] device: 'i2c-0': device_add [ 0.203125] bus: 'i2c': add device i2c-0 [ 0.203125] PM: Adding info for i2c:i2c-0 [ 0.203125] device: '0-0050': device_add [ 0.203125] bus: 'i2c': add device 0-0050 [ 0.203125] PM: Adding info for i2c:0-0050 [ 0.203125] at91_i2c f8010000.i2c: AT91 i2c bus driver. [ 0.203125] driver: 'f8010000.i2c': driver_bound: bound to device 'at91_i2c' [ 0.203125] bus: 'platform': really_probe: bound device f8010000.i2c to driver at91_i2c [ 0.203125] bus: 'platform': driver_probe_device: matched device f8014000.i2c with driver at91_i2c [ 0.203125] bus: 'platform': really_probe: probing driver at91_i2c with device f8014000.i2c [ 0.203125] at91_i2c f8014000.i2c: no sleep pinctrl state [ 0.203125] at91_i2c f8014000.i2c: no idle pinctrl state [ 0.210937] at91_i2c f8014000.i2c: using dma1chan0 (tx) and dma1chan1 (rx) for DMA transfers [ 0.210937] device: 'i2c-1': device_add [ 0.210937] bus: 'i2c': add device i2c-1 [ 0.210937] PM: Adding info for i2c:i2c-1 [ 0.210937] at91_i2c f8014000.i2c: AT91 i2c bus driver. [ 0.210937] driver: 'f8014000.i2c': driver_bound: bound to device 'at91_i2c' [ 0.210937] bus: 'platform': really_probe: bound device f8014000.i2c to driver at91_i2c [ 0.210937] device class 'watchdog': registering [ 0.210937] bus: 'mmc': registered [ 0.210937] device class 'mmc_host': registering [ 0.210937] bus: 'sdio': registered [ 0.210937] device class 'leds': registering [ 0.210937] device class 'net': registering [ 0.210937] device: 'lo': device_add [ 0.210937] PM: Adding info for No Bus:lo [ 0.218750] Switched to clocksource tcb_clksrc [ 0.218750] device class 'mem': registering [ 0.218750] device: 'mem': device_add [ 0.218750] PM: Adding info for No Bus:mem [ 0.218750] device: 'kmem': device_add [ 0.218750] PM: Adding info for No Bus:kmem [ 0.218750] device: 'null': device_add [ 0.218750] PM: Adding info for No Bus:null [ 0.218750] device: 'zero': device_add [ 0.218750] PM: Adding info for No Bus:zero [ 0.218750] device: 'full': device_add [ 0.218750] PM: Adding info for No Bus:full [ 0.218750] device: 'random': device_add [ 0.218750] PM: Adding info for No Bus:random [ 0.218750] device: 'urandom': device_add [ 0.218750] PM: Adding info for No Bus:urandom [ 0.218750] device: 'kmsg': device_add [ 0.218750] PM: Adding info for No Bus:kmsg [ 0.226562] device: 'tty': device_add [ 0.226562] PM: Adding info for No Bus:tty [ 0.226562] device: 'console': device_add [ 0.226562] PM: Adding info for No Bus:console [ 0.226562] device: 'tty0': device_add [ 0.226562] PM: Adding info for No Bus:tty0 [ 0.226562] device class 'vc': registering [ 0.226562] device: 'vcs': device_add [ 0.226562] PM: Adding info for No Bus:vcs [ 0.226562] device: 'vcsa': device_add [ 0.226562] PM: Adding info for No Bus:vcsa [ 0.226562] device: 'vcs1': device_add [ 0.226562] PM: Adding info for No Bus:vcs1 [ 0.226562] device: 'vcsa1': device_add [ 0.226562] PM: Adding info for No Bus:vcsa1 [ 0.226562] device: 'tty1': device_add [ 0.226562] PM: Adding info for No Bus:tty1 [ 0.226562] device: 'tty2': device_add [ 0.234375] PM: Adding info for No Bus:tty2 [ 0.234375] device: 'tty3': device_add [ 0.234375] PM: Adding info for No Bus:tty3 [ 0.234375] device: 'tty4': device_add [ 0.234375] PM: Adding info for No Bus:tty4 [ 0.234375] device: 'tty5': device_add [ 0.234375] PM: Adding info for No Bus:tty5 [ 0.234375] device: 'tty6': device_add [ 0.234375] PM: Adding info for No Bus:tty6 [ 0.234375] device: 'tty7': device_add [ 0.234375] PM: Adding info for No Bus:tty7 [ 0.234375] device: 'tty8': device_add [ 0.234375] PM: Adding info for No Bus:tty8 [ 0.234375] device: 'tty9': device_add [ 0.234375] PM: Adding info for No Bus:tty9 [ 0.234375] device: 'tty10': device_add [ 0.234375] PM: Adding info for No Bus:tty10 [ 0.234375] device: 'tty11': device_add [ 0.242187] PM: Adding info for No Bus:tty11 [ 0.242187] device: 'tty12': device_add [ 0.242187] PM: Adding info for No Bus:tty12 [ 0.242187] device: 'tty13': device_add [ 0.242187] PM: Adding info for No Bus:tty13 [ 0.242187] device: 'tty14': device_add [ 0.242187] PM: Adding info for No Bus:tty14 [ 0.242187] device: 'tty15': device_add [ 0.242187] PM: Adding info for No Bus:tty15 [ 0.242187] device: 'tty16': device_add [ 0.242187] PM: Adding info for No Bus:tty16 [ 0.242187] device: 'tty17': device_add [ 0.242187] PM: Adding info for No Bus:tty17 [ 0.242187] device: 'tty18': device_add [ 0.242187] PM: Adding info for No Bus:tty18 [ 0.242187] device: 'tty19': device_add [ 0.242187] PM: Adding info for No Bus:tty19 [ 0.242187] device: 'tty20': device_add [ 0.250000] PM: Adding info for No Bus:tty20 [ 0.250000] device: 'tty21': device_add [ 0.250000] PM: Adding info for No Bus:tty21 [ 0.250000] device: 'tty22': device_add [ 0.250000] PM: Adding info for No Bus:tty22 [ 0.250000] device: 'tty23': device_add [ 0.250000] PM: Adding info for No Bus:tty23 [ 0.250000] device: 'tty24': device_add [ 0.250000] PM: Adding info for No Bus:tty24 [ 0.250000] device: 'tty25': device_add [ 0.250000] PM: Adding info for No Bus:tty25 [ 0.250000] device: 'tty26': device_add [ 0.250000] PM: Adding info for No Bus:tty26 [ 0.250000] device: 'tty27': device_add [ 0.250000] PM: Adding info for No Bus:tty27 [ 0.250000] device: 'tty28': device_add [ 0.250000] PM: Adding info for No Bus:tty28 [ 0.250000] device: 'tty29': device_add [ 0.257812] PM: Adding info for No Bus:tty29 [ 0.257812] device: 'tty30': device_add [ 0.257812] PM: Adding info for No Bus:tty30 [ 0.257812] device: 'tty31': device_add [ 0.257812] PM: Adding info for No Bus:tty31 [ 0.257812] device: 'tty32': device_add [ 0.257812] PM: Adding info for No Bus:tty32 [ 0.257812] device: 'tty33': device_add [ 0.257812] PM: Adding info for No Bus:tty33 [ 0.257812] device: 'tty34': device_add [ 0.257812] PM: Adding info for No Bus:tty34 [ 0.257812] device: 'tty35': device_add [ 0.257812] PM: Adding info for No Bus:tty35 [ 0.257812] device: 'tty36': device_add [ 0.257812] PM: Adding info for No Bus:tty36 [ 0.257812] device: 'tty37': device_add [ 0.257812] PM: Adding info for No Bus:tty37 [ 0.257812] device: 'tty38': device_add [ 0.265625] PM: Adding info for No Bus:tty38 [ 0.265625] device: 'tty39': device_add [ 0.265625] PM: Adding info for No Bus:tty39 [ 0.265625] device: 'tty40': device_add [ 0.265625] PM: Adding info for No Bus:tty40 [ 0.265625] device: 'tty41': device_add [ 0.265625] PM: Adding info for No Bus:tty41 [ 0.265625] device: 'tty42': device_add [ 0.265625] PM: Adding info for No Bus:tty42 [ 0.265625] device: 'tty43': device_add [ 0.265625] PM: Adding info for No Bus:tty43 [ 0.265625] device: 'tty44': device_add [ 0.265625] PM: Adding info for No Bus:tty44 [ 0.265625] device: 'tty45': device_add [ 0.265625] PM: Adding info for No Bus:tty45 [ 0.265625] device: 'tty46': device_add [ 0.265625] PM: Adding info for No Bus:tty46 [ 0.265625] device: 'tty47': device_add [ 0.273437] PM: Adding info for No Bus:tty47 [ 0.273437] device: 'tty48': device_add [ 0.273437] PM: Adding info for No Bus:tty48 [ 0.273437] device: 'tty49': device_add [ 0.273437] PM: Adding info for No Bus:tty49 [ 0.273437] device: 'tty50': device_add [ 0.273437] PM: Adding info for No Bus:tty50 [ 0.273437] device: 'tty51': device_add [ 0.273437] PM: Adding info for No Bus:tty51 [ 0.273437] device: 'tty52': device_add [ 0.273437] PM: Adding info for No Bus:tty52 [ 0.273437] device: 'tty53': device_add [ 0.273437] PM: Adding info for No Bus:tty53 [ 0.273437] device: 'tty54': device_add [ 0.273437] PM: Adding info for No Bus:tty54 [ 0.273437] device: 'tty55': device_add [ 0.273437] PM: Adding info for No Bus:tty55 [ 0.273437] device: 'tty56': device_add [ 0.281250] PM: Adding info for No Bus:tty56 [ 0.281250] device: 'tty57': device_add [ 0.281250] PM: Adding info for No Bus:tty57 [ 0.281250] device: 'tty58': device_add [ 0.281250] PM: Adding info for No Bus:tty58 [ 0.281250] device: 'tty59': device_add [ 0.281250] PM: Adding info for No Bus:tty59 [ 0.281250] device: 'tty60': device_add [ 0.281250] PM: Adding info for No Bus:tty60 [ 0.281250] device: 'tty61': device_add [ 0.281250] PM: Adding info for No Bus:tty61 [ 0.281250] device: 'tty62': device_add [ 0.281250] PM: Adding info for No Bus:tty62 [ 0.281250] device: 'tty63': device_add [ 0.281250] PM: Adding info for No Bus:tty63 [ 0.281250] device class 'firmware': registering [ 0.289062] NET: Registered protocol family 2 [ 0.289062] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.289062] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.289062] TCP: Hash tables configured (established 1024 bind 1024) [ 0.289062] TCP: reno registered [ 0.289062] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.289062] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.289062] NET: Registered protocol family 1 [ 0.289062] RPC: Registered named UNIX socket transport module. [ 0.289062] RPC: Registered udp transport module. [ 0.289062] RPC: Registered tcp transport module. [ 0.289062] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.289062] bus: 'clocksource': registered [ 0.289062] device: 'clocksource': device_add [ 0.289062] PM: Adding info for No Bus:clocksource [ 0.289062] device: 'clocksource0': device_add [ 0.289062] bus: 'clocksource': add device clocksource0 [ 0.289062] PM: Adding info for clocksource:clocksource0 [ 0.289062] bus: 'platform': add driver alarmtimer [ 0.289062] Registering platform device 'alarmtimer'. Parent at platform [ 0.289062] device: 'alarmtimer': device_add [ 0.289062] bus: 'platform': add device alarmtimer [ 0.289062] PM: Adding info for platform:alarmtimer [ 0.289062] bus: 'platform': driver_probe_device: matched device alarmtimer with driver alarmtimer [ 0.289062] bus: 'platform': really_probe: probing driver alarmtimer with device alarmtimer [ 0.289062] alarmtimer alarmtimer: no default pinctrl state [ 0.289062] driver: 'alarmtimer': driver_bound: bound to device 'alarmtimer' [ 0.289062] bus: 'platform': really_probe: bound device alarmtimer to driver alarmtimer [ 0.296875] bus: 'clockevents': registered [ 0.296875] device: 'clockevents': device_add [ 0.296875] PM: Adding info for No Bus:clockevents [ 0.296875] device: 'clockevent0': device_add [ 0.296875] bus: 'clockevents': add device clockevent0 [ 0.296875] PM: Adding info for clockevents:clockevent0 [ 0.296875] futex hash table entries: 256 (order: -1, 2048 bytes) [ 0.296875] NTFS driver 2.1.30 [Flags: R/W]. [ 0.296875] msgmni has been set to 243 [ 0.296875] io scheduler noop registered (default) [ 0.296875] device: 'ptyp0': device_add [ 0.296875] PM: Adding info for No Bus:ptyp0 [ 0.296875] device: 'ptyp1': device_add [ 0.296875] PM: Adding info for No Bus:ptyp1 [ 0.304687] device: 'ptyp2': device_add [ 0.304687] PM: Adding info for No Bus:ptyp2 [ 0.304687] device: 'ptyp3': device_add [ 0.304687] PM: Adding info for No Bus:ptyp3 [ 0.304687] device: 'ttyp0': device_add [ 0.304687] PM: Adding info for No Bus:ttyp0 [ 0.304687] device: 'ttyp1': device_add [ 0.304687] PM: Adding info for No Bus:ttyp1 [ 0.304687] device: 'ttyp2': device_add [ 0.304687] PM: Adding info for No Bus:ttyp2 [ 0.304687] device: 'ttyp3': device_add [ 0.304687] PM: Adding info for No Bus:ttyp3 [ 0.304687] device: 'ptmx': device_add [ 0.304687] PM: Adding info for No Bus:ptmx [ 0.304687] bus: 'platform': add driver atmel_usart [ 0.304687] bus: 'platform': driver_probe_device: matched device fffff200.serial with driver atmel_usart [ 0.304687] bus: 'platform': really_probe: probing driver atmel_usart with device fffff200.serial [ 0.304687] atmel_usart fffff200.serial: no sleep pinctrl state [ 0.304687] atmel_usart fffff200.serial: no idle pinctrl state [ 0.304687] fffff200.serial: ttyS0 at MMIO 0xfffff200 (irq = 16, base_baud = 8333333) is a ATMEL_SERIAL [ 0.648437] console [ttyS0] enabled [ 0.656250] device: 'ttyS0': device_add [ 0.656250] PM: Adding info for No Bus:ttyS0 [ 0.656250] driver: 'fffff200.serial': driver_bound: bound to device 'atmel_usart' [ 0.656250] bus: 'platform': really_probe: bound device fffff200.serial to driver atmel_usart [ 0.656250] bus: 'platform': add driver atmel-trng [ 0.656250] device: '1:0': device_add [ 0.656250] PM: Adding info for No Bus:1:0 [ 0.656250] device: 'ram0': device_add [ 0.656250] PM: Adding info for No Bus:ram0 [ 0.656250] device: '1:1': device_add [ 0.656250] PM: Adding info for No Bus:1:1 [ 0.656250] device: 'ram1': device_add [ 0.656250] PM: Adding info for No Bus:ram1 [ 0.664062] device: '1:2': device_add [ 0.664062] PM: Adding info for No Bus:1:2 [ 0.664062] device: 'ram2': device_add [ 0.664062] PM: Adding info for No Bus:ram2 [ 0.664062] device: '1:3': device_add [ 0.664062] PM: Adding info for No Bus:1:3 [ 0.664062] device: 'ram3': device_add [ 0.664062] PM: Adding info for No Bus:ram3 [ 0.664062] brd: module loaded [ 0.671875] device: 'loop-control': device_add [ 0.671875] PM: Adding info for No Bus:loop-control [ 0.671875] device: '7:0': device_add [ 0.671875] PM: Adding info for No Bus:7:0 [ 0.671875] device: 'loop0': device_add [ 0.671875] PM: Adding info for No Bus:loop0 [ 0.671875] device: '7:1': device_add [ 0.671875] PM: Adding info for No Bus:7:1 [ 0.671875] device: 'loop1': device_add [ 0.671875] PM: Adding info for No Bus:loop1 [ 0.671875] device: '7:2': device_add [ 0.671875] PM: Adding info for No Bus:7:2 [ 0.671875] device: 'loop2': device_add [ 0.679687] PM: Adding info for No Bus:loop2 [ 0.679687] device: '7:3': device_add [ 0.679687] PM: Adding info for No Bus:7:3 [ 0.679687] device: 'loop3': device_add [ 0.679687] PM: Adding info for No Bus:loop3 [ 0.679687] device: '7:4': device_add [ 0.679687] PM: Adding info for No Bus:7:4 [ 0.679687] device: 'loop4': device_add [ 0.679687] PM: Adding info for No Bus:loop4 [ 0.679687] device: '7:5': device_add [ 0.679687] PM: Adding info for No Bus:7:5 [ 0.679687] device: 'loop5': device_add [ 0.679687] PM: Adding info for No Bus:loop5 [ 0.687500] device: '7:6': device_add [ 0.687500] PM: Adding info for No Bus:7:6 [ 0.687500] device: 'loop6': device_add [ 0.687500] PM: Adding info for No Bus:loop6 [ 0.687500] device: '7:7': device_add [ 0.687500] PM: Adding info for No Bus:7:7 [ 0.687500] device: 'loop7': device_add [ 0.687500] PM: Adding info for No Bus:loop7 [ 0.687500] loop: module loaded [ 0.695312] bus: 'platform': add driver atmel_pwm [ 0.695312] bus: 'platform': remove driver atmel_pwm [ 0.695312] driver: 'atmel_pwm': driver_release [ 0.695312] bus: 'i2c': add driver at24 [ 0.695312] bus: 'i2c': driver_probe_device: matched device 0-0050 with driver at24 [ 0.695312] bus: 'i2c': really_probe: probing driver at24 with device 0-0050 [ 0.695312] at24 0-0050: no default pinctrl state [ 0.695312] at24 0-0050: 65536 byte 24c512 EEPROM, writable, 128 bytes/write [ 0.703125] driver: '0-0050': driver_bound: bound to device 'at24' [ 0.703125] bus: 'i2c': really_probe: bound device 0-0050 to driver at24 [ 0.703125] device class 'scsi_disk': registering [ 0.703125] bus: 'scsi': add driver sd [ 0.703125] device class 'mtd': registering [ 0.703125] device: 'mtd-unmap': device_add [ 0.703125] PM: Adding info for No Bus:mtd-unmap [ 0.703125] device: 'mtd-romap': device_add [ 0.703125] PM: Adding info for No Bus:mtd-romap [ 0.703125] device: 'mtd-rwmap': device_add [ 0.703125] PM: Adding info for No Bus:mtd-rwmap [ 0.703125] bus: 'spi': add driver mtd_dataflash [ 0.703125] bus: 'platform': add driver atmel_nand [ 0.703125] bus: 'platform': driver_probe_device: matched device 40000000.nand with driver atmel_nand [ 0.703125] bus: 'platform': really_probe: probing driver atmel_nand with device 40000000.nand [ 0.703125] atmel_nand 40000000.nand: no sleep pinctrl state [ 0.703125] atmel_nand 40000000.nand: no idle pinctrl state [ 0.703125] bus: 'platform': add driver atmel_nand_nfc [ 0.718750] atmel_nand 40000000.nand: Use On Flash BBT [ 0.718750] atmel_nand 40000000.nand: No DMA support for NAND access. [ 0.726562] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xda [ 0.734375] nand: Samsung NAND 256MiB 3,3V 8-bit [ 0.742187] nand: 256MiB, SLC, page size: 2048, OOB size: 64 [ 0.742187] atmel_nand 40000000.nand: can't detect min. ECC, assume 2 bits in 512 bytes [ 0.750000] atmel_nand 40000000.nand: Initialize PMECC params, cap: 2, sector: 512 [ 0.757812] Bad block table found at page 131008, version 0x01 [ 0.765625] Bad block table found at page 130944, version 0x01 [ 0.773437] nand_read_bbt: bad block at 0x0000057a0000 [ 0.781250] nand_read_bbt: bad block at 0x000006e20000 [ 0.781250] nand_read_bbt: bad block at 0x000008800000 [ 0.789062] nand_read_bbt: bad block at 0x000008fa0000 [ 0.789062] nand_read_bbt: bad block at 0x00000d460000 [ 0.796875] nand_read_bbt: bad block at 0x00000e7c0000 [ 0.804687] 5 ofpart partitions found on MTD device atmel_nand [ 0.812500] Creating 5 MTD partitions on "atmel_nand": [ 0.812500] 0x000000000000-0x000000040000 : "at91bootstrap" [ 0.820312] device: 'mtd0': device_add [ 0.820312] PM: Adding info for No Bus:mtd0 [ 0.820312] device: 'mtd0ro': device_add [ 0.820312] PM: Adding info for No Bus:mtd0ro [ 0.820312] device: '31:0': device_add [ 0.820312] PM: Adding info for No Bus:31:0 [ 0.820312] device: 'mtdblock0': device_add [ 0.820312] PM: Adding info for No Bus:mtdblock0 [ 0.828125] 0x000000040000-0x0000000c0000 : "u-boot" [ 0.828125] device: 'mtd1': device_add [ 0.828125] PM: Adding info for No Bus:mtd1 [ 0.828125] device: 'mtd1ro': device_add [ 0.828125] PM: Adding info for No Bus:mtd1ro [ 0.828125] device: '31:1': device_add [ 0.828125] PM: Adding info for No Bus:31:1 [ 0.835937] device: 'mtdblock1': device_add [ 0.835937] PM: Adding info for No Bus:mtdblock1 [ 0.835937] 0x0000000c0000-0x000000200000 : "U-Boot Env" [ 0.835937] device: 'mtd2': device_add [ 0.835937] PM: Adding info for No Bus:mtd2 [ 0.843750] device: 'mtd2ro': device_add [ 0.843750] PM: Adding info for No Bus:mtd2ro [ 0.843750] device: '31:2': device_add [ 0.843750] PM: Adding info for No Bus:31:2 [ 0.843750] device: 'mtdblock2': device_add [ 0.843750] PM: Adding info for No Bus:mtdblock2 [ 0.843750] 0x000000200000-0x000000800000 : "kernel" [ 0.851562] device: 'mtd3': device_add [ 0.851562] PM: Adding info for No Bus:mtd3 [ 0.851562] device: 'mtd3ro': device_add [ 0.851562] PM: Adding info for No Bus:mtd3ro [ 0.851562] device: '31:3': device_add [ 0.851562] PM: Adding info for No Bus:31:3 [ 0.851562] device: 'mtdblock3': device_add [ 0.851562] PM: Adding info for No Bus:mtdblock3 [ 0.851562] 0x000000800000-0x000020000000 : "rootfs" [ 0.859375] mtd: partition "rootfs" extends beyond the end of device "atmel_nand" -- size truncated to 0xf800000 [ 0.867187] device: 'mtd4': device_add [ 0.867187] PM: Adding info for No Bus:mtd4 [ 0.867187] device: 'mtd4ro': device_add [ 0.867187] PM: Adding info for No Bus:mtd4ro [ 0.875000] device: '31:4': device_add [ 0.875000] PM: Adding info for No Bus:31:4 [ 0.875000] device: 'mtdblock4': device_add [ 0.875000] PM: Adding info for No Bus:mtdblock4 [ 0.875000] driver: '40000000.nand': driver_bound: bound to device 'atmel_nand' [ 0.875000] bus: 'platform': really_probe: bound device 40000000.nand to driver atmel_nand [ 0.875000] device class 'spidev': registering [ 0.875000] bus: 'spi': add driver spidev [ 0.875000] bus: 'platform': add driver atmel_spi [ 0.875000] bus: 'platform': driver_probe_device: matched device f0000000.spi with driver atmel_spi [ 0.875000] bus: 'platform': really_probe: probing driver atmel_spi with device f0000000.spi [ 0.875000] atmel_spi f0000000.spi: no sleep pinctrl state [ 0.875000] atmel_spi f0000000.spi: no idle pinctrl state [ 0.875000] atmel_spi f0000000.spi: version: 0x212 [ 0.882812] atmel_spi f0000000.spi: Using dma0chan2 (tx) and dma0chan3 (rx) for DMA transfers [ 0.890625] atmel_spi f0000000.spi: Atmel SPI Controller at 0xf0000000 (irq 26) [ 0.898437] device: 'spi32766': device_add [ 0.898437] PM: Adding info for No Bus:spi32766 [ 0.898437] atmel_spi f0000000.spi: registered master spi32766 (dynamic) [ 0.898437] spi spi32766.0: setup: bpw 8 mode 0x0 -> csr0 00000002 [ 0.898437] spi spi32766.0: setup mode 0, 8 bits/w, 10000000 Hz max --> 0 [ 0.898437] device: 'spi32766.0': device_add [ 0.898437] bus: 'spi': add device spi32766.0 [ 0.898437] PM: Adding info for spi:spi32766.0 [ 0.898437] bus: 'spi': driver_probe_device: matched device spi32766.0 with driver mtd_dataflash [ 0.898437] bus: 'spi': really_probe: probing driver mtd_dataflash with device spi32766.0 [ 0.898437] mtd_dataflash spi32766.0: no default pinctrl state [ 0.898437] mtd_dataflash spi32766.0: new message c783fc58 submitted for spi32766.0 [ 0.898437] mtd_dataflash spi32766.0: activate 14, mr 000e0031 [ 0.898437] atmel_spi f0000000.spi: start pio xfer c783fc88: len 1 tx c78697a0 rx (null) bitpw 8 [ 0.898437] atmel_spi f0000000.spi: start pio xfer c783fcac: len 3 tx (null) rx c78697a1 bitpw 8 [ 0.898437] atmel_spi f0000000.spi: start pio xfer c783fcac: len 3 tx (null) rx c78697a1 bitpw 8 [ 0.898437] atmel_spi f0000000.spi: start pio xfer c783fcac: len 3 tx (null) rx c78697a1 bitpw 8 [ 0.898437] mtd_dataflash spi32766.0: xfer c783fc88: len 1 tx c78697a0/00000000 rx (null)/00000000 [ 0.898437] mtd_dataflash spi32766.0: xfer c783fcac: len 3 tx (null)/00000000 rx c78697a1/00000000 [ 0.898437] mtd_dataflash spi32766.0: DEactivate 14, mr 000f0031 [ 0.898437] mtd_dataflash spi32766.0: new message c783fc58 submitted for spi32766.0 [ 0.898437] mtd_dataflash spi32766.0: activate 14, mr 000e0031 [ 0.898437] atmel_spi f0000000.spi: start pio xfer c783fc88: len 1 tx c78697a0 rx (null) bitpw 8 [ 0.898437] atmel_spi f0000000.spi: start pio xfer c783fcac: len 1 tx (null) rx c78697a1 bitpw 8 [ 0.898437] mtd_dataflash spi32766.0: xfer c783fc88: len 1 tx c78697a0/00000000 rx (null)/00000000 [ 0.898437] mtd_dataflash spi32766.0: xfer c783fcac: len 1 tx (null)/00000000 rx c78697a1/00000000 [ 0.898437] mtd_dataflash spi32766.0: DEactivate 14, mr 000f0031 [ 0.898437] mtd_dataflash spi32766.0: AT45DB321x (4224 KBytes) pagesize 528 bytes, OTP [ 0.906250] device: 'mtd5': device_add [ 0.906250] PM: Adding info for No Bus:mtd5 [ 0.914062] device: 'mtd5ro': device_add [ 0.914062] PM: Adding info for No Bus:mtd5ro [ 0.914062] device: '31:5': device_add [ 0.914062] PM: Adding info for No Bus:31:5 [ 0.914062] device: 'mtdblock5': device_add [ 0.914062] PM: Adding info for No Bus:mtdblock5 [ 0.914062] driver: 'spi32766.0': driver_bound: bound to device 'mtd_dataflash' [ 0.914062] bus: 'spi': really_probe: bound device spi32766.0 to driver mtd_dataflash [ 0.914062] atmel_spi f0000000.spi: registered child spi32766.0 [ 0.914062] spi spi32766.2: setup: bpw 8 mode 0x0 -> csr2 00000002 [ 0.914062] spi spi32766.2: setup mode 0, 8 bits/w, 10000000 Hz max --> 0 [ 0.914062] device: 'spi32766.2': device_add [ 0.914062] bus: 'spi': add device spi32766.2 [ 0.914062] PM: Adding info for spi:spi32766.2 [ 0.914062] atmel_spi f0000000.spi: registered child spi32766.2 [ 0.914062] driver: 'f0000000.spi': driver_bound: bound to device 'atmel_spi' [ 0.914062] bus: 'platform': really_probe: bound device f0000000.spi to driver atmel_spi [ 0.914062] bus: 'mdio_bus': add driver Davicom DM9161E [ 0.914062] bus: 'mdio_bus': add driver Davicom DM9161A [ 0.921875] bus: 'mdio_bus': add driver Davicom DM9131 [ 0.921875] bus: 'mdio_bus': add driver SMSC LAN83C185 [ 0.921875] bus: 'mdio_bus': add driver SMSC LAN8187 [ 0.921875] bus: 'mdio_bus': add driver SMSC LAN8700 [ 0.921875] bus: 'mdio_bus': add driver SMSC LAN911x Internal PHY [ 0.921875] bus: 'mdio_bus': add driver SMSC LAN8710/LAN8720 [ 0.921875] bus: 'mdio_bus': add driver Micrel KS8737 [ 0.921875] bus: 'mdio_bus': add driver Micrel KSZ8021 or KSZ8031 [ 0.921875] bus: 'mdio_bus': add driver Micrel KSZ8031 [ 0.921875] bus: 'mdio_bus': add driver Micrel KSZ8041 [ 0.921875] bus: 'mdio_bus': add driver Micrel KSZ8041RNLI [ 0.921875] bus: 'mdio_bus': add driver Micrel KSZ8051 [ 0.921875] bus: 'mdio_bus': add driver Micrel KSZ8001 or KS8721 [ 0.921875] bus: 'mdio_bus': add driver Micrel KSZ8081 or KSZ8091 [ 0.929687] bus: 'mdio_bus': add driver Micrel KSZ8061 [ 0.929687] bus: 'mdio_bus': add driver Micrel KSZ9021 Gigabit PHY [ 0.929687] bus: 'mdio_bus': add driver Micrel KSZ9031 Gigabit PHY [ 0.929687] bus: 'mdio_bus': add driver Micrel KSZ8873MLL Switch [ 0.929687] bus: 'mdio_bus': add driver Micrel KSZ886X Switch [ 0.929687] vcan: Virtual CAN interface driver [ 0.937500] CAN device driver interface [ 0.937500] bus: 'spi': add driver mcp251x [ 0.937500] bus: 'spi': driver_probe_device: matched device spi32766.2 with driver mcp251x [ 0.937500] bus: 'spi': really_probe: probing driver mcp251x with device spi32766.2 [ 0.937500] mcp251x spi32766.2: no sleep pinctrl state [ 0.937500] mcp251x spi32766.2: no idle pinctrl state [ 0.937500] mcp251x: probe of spi32766.2 failed with error -2 [ 0.945312] bus: 'platform': add driver macb [ 0.945312] bus: 'platform': driver_probe_device: matched device f802c000.ethernet with driver macb [ 0.945312] bus: 'platform': really_probe: probing driver macb with device f802c000.ethernet [ 0.945312] macb f802c000.ethernet: no sleep pinctrl state [ 0.945312] macb f802c000.ethernet: no idle pinctrl state [ 0.945312] device: 'eth0': device_add [ 0.945312] PM: Adding info for No Bus:eth0 [ 0.945312] device: 'f802c000.etherne': device_add [ 0.945312] PM: Adding info for No Bus:f802c000.etherne [ 0.945312] libphy: MACB_mii_bus: probed [ 0.953125] device: 'f802c000.etherne:01': device_add [ 0.953125] bus: 'mdio_bus': add device f802c000.etherne:01 [ 0.953125] PM: Adding info for mdio_bus:f802c000.etherne:01 [ 0.953125] bus: 'mdio_bus': driver_probe_device: matched device f802c000.etherne:01 with driver SMSC LAN8710/LAN8720 [ 0.953125] bus: 'mdio_bus': really_probe: probing driver SMSC LAN8710/LAN8720 with device f802c000.etherne:01 [ 0.953125] SMSC LAN8710/LAN8720 f802c000.etherne:01: no default pinctrl state [ 0.953125] driver: 'f802c000.etherne:01': driver_bound: bound to device 'SMSC LAN8710/LAN8720' [ 0.953125] bus: 'mdio_bus': really_probe: bound device f802c000.etherne:01 to driver SMSC LAN8710/LAN8720 [ 1.031250] macb f802c000.ethernet eth0: Cadence MACB at 0xf802c000 irq 27 (00:11:22:33:44:55) [ 1.039062] macb f802c000.ethernet eth0: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=f802c000.etherne:01, irq=-1) [ 1.046875] driver: 'f802c000.ethernet': driver_bound: bound to device 'macb' [ 1.046875] bus: 'platform': really_probe: bound device f802c000.ethernet to driver macb [ 1.046875] bus: 'platform': add driver smc91x [ 1.046875] bus: 'platform': add driver smc911x [ 1.046875] bus: 'platform': add driver smsc911x [ 1.046875] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.054687] ehci-atmel: EHCI Atmel driver [ 1.062500] bus: 'platform': add driver atmel-ehci [ 1.062500] bus: 'platform': driver_probe_device: matched device 700000.ehci with driver atmel-ehci [ 1.062500] bus: 'platform': really_probe: probing driver atmel-ehci with device 700000.ehci [ 1.062500] atmel-ehci 700000.ehci: no default pinctrl state [ 1.062500] atmel-ehci 700000.ehci: EHCI Host Controller [ 1.070312] atmel-ehci 700000.ehci: new USB bus registered, assigned bus number 1 [ 1.078125] atmel-ehci 700000.ehci: irq 28, io mem 0x00700000 [ 1.093750] atmel-ehci 700000.ehci: USB 2.0 started, EHCI 1.00 [ 1.093750] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.101562] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.109375] usb usb1: Product: EHCI Host Controller [ 1.117187] usb usb1: Manufacturer: Linux 3.14.0-rc4+ ehci_hcd [ 1.117187] usb usb1: SerialNumber: 700000.ehci [ 1.125000] device: 'usb1': device_add [ 1.125000] bus: 'usb': add device usb1 [ 1.125000] PM: Adding info for usb:usb1 [ 1.125000] bus: 'usb': driver_probe_device: matched device usb1 with driver usb [ 1.125000] bus: 'usb': really_probe: probing driver usb with device usb1 [ 1.125000] usb usb1: no default pinctrl state [ 1.125000] device: '1-0:1.0': device_add [ 1.125000] bus: 'usb': add device 1-0:1.0 [ 1.125000] PM: Adding info for usb:1-0:1.0 [ 1.125000] bus: 'usb': driver_probe_device: matched device 1-0:1.0 with driver hub [ 1.125000] bus: 'usb': really_probe: probing driver hub with device 1-0:1.0 [ 1.125000] hub 1-0:1.0: no default pinctrl state [ 1.125000] hub 1-0:1.0: USB hub found [ 1.132812] hub 1-0:1.0: 3 ports detected [ 1.132812] device: 'port1': device_add [ 1.132812] PM: Adding info for No Bus:port1 [ 1.132812] device: 'port2': device_add [ 1.132812] PM: Adding info for No Bus:port2 [ 1.132812] device: 'port3': device_add [ 1.132812] PM: Adding info for No Bus:port3 [ 1.140625] driver: '1-0:1.0': driver_bound: bound to device 'hub' [ 1.140625] bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub [ 1.140625] device: 'ep_81': device_add [ 1.140625] PM: Adding info for No Bus:ep_81 [ 1.140625] driver: 'usb1': driver_bound: bound to device 'usb' [ 1.140625] bus: 'usb': really_probe: bound device usb1 to driver usb [ 1.140625] device: 'ep_00': device_add [ 1.140625] PM: Adding info for No Bus:ep_00 [ 1.140625] driver: '700000.ehci': driver_bound: bound to device 'atmel-ehci' [ 1.140625] bus: 'platform': really_probe: bound device 700000.ehci to driver atmel-ehci [ 1.140625] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.140625] ohci-atmel: OHCI Atmel driver [ 1.148437] bus: 'platform': add driver at91_ohci [ 1.148437] bus: 'platform': driver_probe_device: matched device 600000.ohci with driver at91_ohci [ 1.148437] bus: 'platform': really_probe: probing driver at91_ohci with device 600000.ohci [ 1.148437] at91_ohci 600000.ohci: no default pinctrl state [ 1.148437] at91_ohci 600000.ohci: OHCI Host Controller [ 1.156250] at91_ohci 600000.ohci: new USB bus registered, assigned bus number 2 [ 1.164062] at91_ohci 600000.ohci: irq 28, io mem 0x00600000 [ 1.226562] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.234375] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.242187] usb usb2: Product: OHCI Host Controller [ 1.242187] usb usb2: Manufacturer: Linux 3.14.0-rc4+ ohci_hcd [ 1.250000] usb usb2: SerialNumber: at91 [ 1.257812] device: 'usb2': device_add [ 1.257812] bus: 'usb': add device usb2 [ 1.257812] PM: Adding info for usb:usb2 [ 1.257812] bus: 'usb': driver_probe_device: matched device usb2 with driver usb [ 1.257812] bus: 'usb': really_probe: probing driver usb with device usb2 [ 1.257812] usb usb2: no default pinctrl state [ 1.257812] device: '2-0:1.0': device_add [ 1.257812] bus: 'usb': add device 2-0:1.0 [ 1.257812] PM: Adding info for usb:2-0:1.0 [ 1.257812] bus: 'usb': driver_probe_device: matched device 2-0:1.0 with driver hub [ 1.257812] bus: 'usb': really_probe: probing driver hub with device 2-0:1.0 [ 1.257812] hub 2-0:1.0: no default pinctrl state [ 1.257812] hub 2-0:1.0: USB hub found [ 1.265625] hub 2-0:1.0: 3 ports detected [ 1.265625] device: 'port1': device_add [ 1.265625] PM: Adding info for No Bus:port1 [ 1.265625] device: 'port2': device_add [ 1.265625] PM: Adding info for No Bus:port2 [ 1.265625] device: 'port3': device_add [ 1.265625] PM: Adding info for No Bus:port3 [ 1.265625] driver: '2-0:1.0': driver_bound: bound to device 'hub' [ 1.265625] bus: 'usb': really_probe: bound device 2-0:1.0 to driver hub [ 1.265625] device: 'ep_81': device_add [ 1.265625] PM: Adding info for No Bus:ep_81 [ 1.265625] driver: 'usb2': driver_bound: bound to device 'usb' [ 1.265625] bus: 'usb': really_probe: bound device usb2 to driver usb [ 1.265625] device: 'ep_00': device_add [ 1.265625] PM: Adding info for No Bus:ep_00 [ 1.265625] driver: '600000.ohci': driver_bound: bound to device 'at91_ohci' [ 1.265625] bus: 'platform': really_probe: bound device 600000.ohci to driver at91_ohci [ 1.265625] bus: 'usb': add driver usb-storage [ 1.273437] usbcore: registered new interface driver usb-storage [ 1.273437] bus: 'platform': add driver at91_rtc [ 1.273437] bus: 'platform': driver_probe_device: matched device fffffeb0.rtc with driver at91_rtc [ 1.273437] bus: 'platform': really_probe: probing driver at91_rtc with device fffffeb0.rtc [ 1.273437] at91_rtc fffffeb0.rtc: no default pinctrl state [ 1.273437] device: 'rtc0': device_add [ 1.273437] PM: Adding info for No Bus:rtc0 [ 1.281250] at91_rtc fffffeb0.rtc: rtc core: registered fffffeb0.rtc as rtc0 [ 1.281250] at91_rtc fffffeb0.rtc: AT91 Real Time Clock driver. [ 1.289062] driver: 'fffffeb0.rtc': driver_bound: bound to device 'at91_rtc' [ 1.289062] bus: 'platform': really_probe: bound device fffffeb0.rtc to driver at91_rtc [ 1.289062] bus: 'platform': add driver rtc-at91sam9 [ 1.289062] i2c /dev entries driver [ 1.296875] device class 'i2c-dev': registering [ 1.296875] device: 'i2c-0': device_add [ 1.296875] PM: Adding info for No Bus:i2c-0 [ 1.296875] device: 'i2c-1': device_add [ 1.296875] PM: Adding info for No Bus:i2c-1 [ 1.296875] bus: 'platform': add driver at91_wdt [ 1.296875] bus: 'platform': remove driver at91_wdt [ 1.296875] driver: 'at91_wdt': driver_release [ 1.296875] bus: 'mmc': add driver mmcblk [ 1.296875] bus: 'spi': add driver mmc_spi [ 1.296875] bus: 'platform': add driver leds-gpio [ 1.296875] bus: 'platform': driver_probe_device: matched device leds.3 with driver leds-gpio [ 1.296875] bus: 'platform': really_probe: probing driver leds-gpio with device leds.3 [ 1.296875] leds-gpio leds.3: no default pinctrl state [ 1.296875] device: 'module_led': device_add [ 1.304687] PM: Adding info for No Bus:module_led [ 1.304687] device: 'cpu_led': device_add [ 1.304687] PM: Adding info for No Bus:cpu_led [ 1.304687] device: 'busy_led': device_add [ 1.304687] PM: Adding info for No Bus:busy_led [ 1.304687] device: 'fail_led': device_add [ 1.304687] PM: Adding info for No Bus:fail_led [ 1.304687] driver: 'leds.3': driver_bound: bound to device 'leds-gpio' [ 1.304687] bus: 'platform': really_probe: bound device leds.3 to driver leds-gpio [ 1.304687] bus: 'hid': registered [ 1.304687] bus: 'hid': add driver hid-generic [ 1.304687] bus: 'usb': add driver usbhid [ 1.304687] usbcore: registered new interface driver usbhid [ 1.312500] usbhid: USB HID core driver [ 1.320312] TCP: cubic registered [ 1.320312] NET: Registered protocol family 17 [ 1.328125] can: controller area network core (rev 20120528 abi 9) [ 1.335937] NET: Registered protocol family 29 [ 1.335937] can: raw protocol (rev 20120528) [ 1.343750] can: broadcast manager protocol (rev 20120528 t) [ 1.343750] device: 'cpu_dma_latency': device_add [ 1.343750] PM: Adding info for No Bus:cpu_dma_latency [ 1.351562] device: 'network_latency': device_add [ 1.351562] PM: Adding info for No Bus:network_latency [ 1.351562] device: 'network_throughput': device_add [ 1.351562] PM: Adding info for No Bus:network_throughput [ 1.351562] device class 'ubi': registering [ 1.351562] device: 'ubi_ctrl': device_add [ 1.351562] PM: Adding info for No Bus:ubi_ctrl [ 1.351562] bus: 'platform': add driver gpio-keys [ 1.351562] bus: 'platform': driver_probe_device: matched device gpio_keys.4 with driver gpio-keys [ 1.351562] bus: 'platform': really_probe: probing driver gpio-keys with device gpio_keys.4 [ 1.351562] gpio-keys gpio_keys.4: no default pinctrl state [ 1.351562] device: 'input0': device_add [ 1.351562] PM: Adding info for No Bus:input0 [ 1.351562] input: gpio_keys.4 as /devices/gpio_keys.4/input/input0 [ 1.359375] device: 'event0': device_add [ 1.359375] PM: Adding info for No Bus:event0 [ 1.359375] evbug: Connected device: input0 (gpio_keys.4 at gpio-keys/input0) [ 1.359375] driver: 'gpio_keys.4': driver_bound: bound to device 'gpio-keys' [ 1.359375] bus: 'platform': really_probe: bound device gpio_keys.4 to driver gpio-keys [ 1.367187] at91_rtc fffffeb0.rtc: setting system clock to 2014-02-26 09:47:03 UTC (1393408023) [ 1.375000] bus: 'platform': add driver atmel_mci [ 1.375000] bus: 'platform': driver_probe_device: matched device f0008000.mmc with driver atmel_mci [ 1.375000] bus: 'platform': really_probe: probing driver atmel_mci with device f0008000.mmc [ 1.375000] atmel_mci f0008000.mmc: no sleep pinctrl state [ 1.375000] atmel_mci f0008000.mmc: no idle pinctrl state [ 1.375000] atmel_mci f0008000.mmc: version: 0x504 [ 1.375000] atmel_mci f0008000.mmc: using dma0chan4 for DMA transfers [ 1.382812] device: 'mmc0': device_add [ 1.382812] PM: Adding info for No Bus:mmc0 [ 1.429687] atmel_mci f0008000.mmc: Atmel MCI controller at 0xf0008000 irq 22, 1 slots [ 1.437500] driver: 'f0008000.mmc': driver_bound: bound to device 'atmel_mci' [ 1.437500] bus: 'platform': really_probe: bound device f0008000.mmc to driver atmel_mci [ 3.031250] macb f802c000.ethernet eth0: link up (100/Full) [ 3.054687] IP-Config: Guessing netmask 255.0.0.0 [ 3.054687] IP-Config: Complete: [ 3.054687] device=eth0, hwaddr=00:11:22:33:44:55, ipaddr=10.185.5.102, mask=255.0.0.0, gw=255.255.255.255 [ 3.062500] host=10.185.5.102, domain=, nis-domain=(none) [ 3.070312] bootserver=255.255.255.255, rootserver=10.185.5.4, rootpath= [ 3.101562] device: '0:11': device_add [ 3.101562] PM: Adding info for No Bus:0:11 [ 3.101562] VFS: Mounted root (nfs filesystem) on device 0:11. [ 3.109375] devtmpfs: mounted [ 3.109375] Freeing unused kernel memory: 136K (c048b000 - c04ad000) [ 3.796875] random: dd urandom read with 21 bits of entropy available [ 45.789062] random: nonblocking pool is initialized