[PATCH] can: Documentation: fix spelling of sample-point

[PATCH] can: Documentation: fix spelling of sample-point

[Robert Schwebel]

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
---
 Documentation/networking/can.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index 0cbe6ec..2fa44cb 100644
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt
@@ -1017,7 +1017,7 @@ solution for a couple of reasons:
 	in case of a bus-off condition after the specified delay time
 	in milliseconds. By default it's off.
 
-    "bitrate 125000 sample_point 0.875"
+    "bitrate 125000 sample-point 0.875"
 	Shows the real bit-rate in bits/sec and the sample-point in the
 	range 0.000..0.999. If the calculation of bit-timing parameters
 	is enabled in the kernel (CONFIG_CAN_CALC_BITTIMING=y), the
-- 
1.9.0

Re: [PATCH] can: Documentation: fix spelling of sample-point

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 692 bytes --]

On 03/19/2014 09:49 AM, Robert Schwebel wrote:
> Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>

Applied to can-next, adjusted the commit message as follows:

> can: Documentation: fix parameter name "sample-point"
> 
> This patch fixes the name of the parameter to configure the sample point used
> in iproute2's ip command. The correct writing is "sample-point" not
> "sample_point"

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 242 bytes --]