From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Matthias Klein <matthias.klein@optimeas.de>,
wg@grandegger.com, linux-can@vger.kernel.org,
support@karo-electronics.de
Cc: bigeasy@linutronix.de
Subject: Re: [PATCH V2 4/5] can: flexcan: fix transition from and to freeze mode in chip_{,un}freeze
Date: Mon, 28 Jul 2014 08:38:28 +0200 [thread overview]
Message-ID: <53D5EFE4.8060308@pengutronix.de> (raw)
In-Reply-To: <1406529268-20126-4-git-send-email-matthias.klein@optimeas.de>
[-- Attachment #1: Type: text/plain, Size: 4330 bytes --]
On 07/28/2014 08:34 AM, Matthias Klein wrote:
> From: Marc Kleine-Budde <mkl@pengutronix.de>
>
> This patch factors out freeze and unfreeze of the CAN core into seperate
> functions. Experiments have shown that the transition from and to freeze mode
> may take several microseconds, especially the time entering the freeze mode
> depends on the current bitrate.
>
> This patch adds a while loop which polls the Freeze Mode ACK bit (FRZ_ACK) that
> indicates a successfull mode change. If the function runs into a timeout a
> error value is returned.
>
> Cc: linux-stable <stable@vger.kernel.org>
> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> Signed-off-by: Matthias Klein <matthias.klein@optimeas.de>
This patch is already mainline, please make your series based on the
latest net-next/master tree.
Marc
> ---
> drivers/net/can/flexcan.c | 60 ++++++++++++++++++++++++++++++++++++++---------
> 1 file changed, 49 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
> index f6f95ae..b77f1da 100644
> --- a/drivers/net/can/flexcan.c
> +++ b/drivers/net/can/flexcan.c
> @@ -322,6 +322,44 @@ static int flexcan_chip_disable(struct flexcan_priv *priv)
> return 0;
> }
>
> +static int flexcan_chip_freeze(struct flexcan_priv *priv)
> +{
> + struct flexcan_regs __iomem *regs = priv->base;
> + unsigned int timeout = 1000 * 1000 * 10 / priv->can.bittiming.bitrate;
> + u32 reg;
> +
> + reg = flexcan_read(®s->mcr);
> + reg |= FLEXCAN_MCR_HALT;
> + flexcan_write(reg, ®s->mcr);
> +
> + while (timeout-- && !(flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK))
> + usleep_range(100, 200);
> +
> + if (!(flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK))
> + return -ETIMEDOUT;
> +
> + return 0;
> +}
> +
> +static int flexcan_chip_unfreeze(struct flexcan_priv *priv)
> +{
> + struct flexcan_regs __iomem *regs = priv->base;
> + unsigned int timeout = FLEXCAN_TIMEOUT_US / 10;
> + u32 reg;
> +
> + reg = flexcan_read(®s->mcr);
> + reg &= ~FLEXCAN_MCR_HALT;
> + flexcan_write(reg, ®s->mcr);
> +
> + while (timeout-- && (flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK))
> + usleep_range(10, 20);
> +
> + if (flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK)
> + return -ETIMEDOUT;
> +
> + return 0;
> +}
> +
> static int flexcan_get_berr_counter(const struct net_device *dev,
> struct can_berr_counter *bec)
> {
> @@ -776,7 +814,7 @@ static int flexcan_chip_start(struct net_device *dev)
> netdev_err(dev, "Failed to softreset can module (mcr=0x%08x)\n",
> reg_mcr);
> err = -ENODEV;
> - goto out;
> + goto out_chip_disable;
> }
>
> flexcan_set_bittiming(dev);
> @@ -846,12 +884,12 @@ static int flexcan_chip_start(struct net_device *dev)
>
> err = flexcan_transceiver_enable(priv);
> if (err)
> - goto out;
> + goto out_chip_disable;
>
> /* synchronize with the can bus */
> - reg_mcr = flexcan_read(®s->mcr);
> - reg_mcr &= ~FLEXCAN_MCR_HALT;
> - flexcan_write(reg_mcr, ®s->mcr);
> + err = flexcan_chip_unfreeze(priv);
> + if (err)
> + goto out_transceiver_disable;
>
> priv->can.state = CAN_STATE_ERROR_ACTIVE;
>
> @@ -864,7 +902,9 @@ static int flexcan_chip_start(struct net_device *dev)
>
> return 0;
>
> - out:
> + out_transceiver_disable:
> + flexcan_transceiver_disable(priv);
> + out_chip_disable:
> flexcan_chip_disable(priv);
> return err;
> }
> @@ -879,12 +919,10 @@ static void flexcan_chip_stop(struct net_device *dev)
> {
> struct flexcan_priv *priv = netdev_priv(dev);
> struct flexcan_regs __iomem *regs = priv->base;
> - u32 reg;
>
> - /* Disable + halt module */
> - reg = flexcan_read(®s->mcr);
> - reg |= FLEXCAN_MCR_MDIS | FLEXCAN_MCR_HALT;
> - flexcan_write(reg, ®s->mcr);
> + /* freeze + disable module */
> + flexcan_chip_freeze(priv);
> + flexcan_chip_disable(priv);
>
> /* Disable all interrupts */
> flexcan_write(0, ®s->imask1);
>
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 242 bytes --]
next prev parent reply other threads:[~2014-07-28 6:38 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-28 6:34 [PATCH V2 1/5] net: can: flexcan: provide propper return code in ISR Matthias Klein
2014-07-28 6:34 ` [PATCH V2 2/5] net: can: flexcan: disable error interrupts in non ERR-Active state Matthias Klein
2014-07-28 6:40 ` Varka Bhadram
2014-07-28 6:34 ` [PATCH V2 3/5] net: can: flexcan: handle state passive -> warning transition Matthias Klein
2014-07-28 6:34 ` [PATCH V2 4/5] can: flexcan: fix transition from and to freeze mode in chip_{,un}freeze Matthias Klein
2014-07-28 6:38 ` Marc Kleine-Budde [this message]
2014-07-28 6:34 ` [PATCH V2 5/5] net: can: flexcan: fix for wrong TX error count behaviour on i.MX53 Matthias Klein
2014-07-28 6:39 ` Varka Bhadram
2014-07-28 7:05 ` Marc Kleine-Budde
2014-07-28 7:08 ` Sebastian Andrzej Siewior
2014-07-28 6:36 ` [PATCH V2 1/5] net: can: flexcan: provide propper return code in ISR Varka Bhadram
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53D5EFE4.8060308@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=bigeasy@linutronix.de \
--cc=linux-can@vger.kernel.org \
--cc=matthias.klein@optimeas.de \
--cc=support@karo-electronics.de \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).