From: Marc Kleine-Budde <mkl@pengutronix.de>
To: David Jander <david@protonic.nl>
Cc: wg@grandegger.com, linux-can@vger.kernel.org
Subject: Re: [PATCH 1/3] can: flexcan.c: Correctly initialize mailboxes
Date: Tue, 02 Sep 2014 16:53:15 +0200 [thread overview]
Message-ID: <5405D9DB.7050101@pengutronix.de> (raw)
In-Reply-To: <5405AC3D.5040508@pengutronix.de>
[-- Attachment #1: Type: text/plain, Size: 2043 bytes --]
On 09/02/2014 01:38 PM, Marc Kleine-Budde wrote:
>> diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
>> index 3f21142..f028c5d 100644
>> --- a/drivers/net/can/flexcan.c
>> +++ b/drivers/net/can/flexcan.c
>> @@ -62,7 +62,7 @@
>> #define FLEXCAN_MCR_BCC BIT(16)
>> #define FLEXCAN_MCR_LPRIO_EN BIT(13)
>> #define FLEXCAN_MCR_AEN BIT(12)
>> -#define FLEXCAN_MCR_MAXMB(x) ((x) & 0xf)
>> +#define FLEXCAN_MCR_MAXMB(x) ((x) & 0x1f)
>> #define FLEXCAN_MCR_IDAM_A (0 << 8)
>> #define FLEXCAN_MCR_IDAM_B (1 << 8)
>> #define FLEXCAN_MCR_IDAM_C (2 << 8)
>> @@ -735,9 +735,11 @@ static int flexcan_chip_start(struct net_device *dev)
>> *
>> */
>> reg_mcr = flexcan_read(®s->mcr);
>> + reg_mcr &= ~FLEXCAN_MCR_MAXMB(0xff);
>> reg_mcr |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_FEN | FLEXCAN_MCR_HALT |
>> FLEXCAN_MCR_SUPV | FLEXCAN_MCR_WRN_EN |
>> - FLEXCAN_MCR_IDAM_C | FLEXCAN_MCR_SRX_DIS;
>> + FLEXCAN_MCR_IDAM_C | FLEXCAN_MCR_SRX_DIS |
>> + FLEXCAN_MCR_MAXMB(FLEXCAN_TX_BUF_ID);
>> netdev_dbg(dev, "%s: writing mcr=0x%08x", __func__, reg_mcr);
>> flexcan_write(reg_mcr, ®s->mcr);
>>
>> Eh! This looks wrong! The MAXMB field is 7 bits wide according to the
>> reference manual (bits 0-6)... but the reset default value is supposed to be
>
> ...according to the imx6 reference manual. The size of the MAXMB field
> depends on the actual IP version.
On mcf5213 (some old coldfire, not supported by this driver)
it's 4 bit wide.
On mx25, mx28, mx53 it's 6 bits wide.
On mx6{q,sdl}, vf610 it's 7 bits wide.
I'm not sure about the powerpc based cores as I don't have the data sheets.
I cannot find a data sheet, where it has a width of 5 bit.
I'll prepare a patch to fix it.
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
next prev parent reply other threads:[~2014-09-02 14:53 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-27 9:58 [PATCH 0/3] Decrease likelyhood of RX overruns David Jander
2014-08-27 9:58 ` [PATCH 1/3] can: flexcan.c: Correctly initialize mailboxes David Jander
2014-09-02 10:24 ` Marc Kleine-Budde
2014-09-02 10:37 ` David Jander
2014-09-02 10:59 ` Marc Kleine-Budde
2014-09-02 11:15 ` David Jander
2014-09-02 13:54 ` Marc Kleine-Budde
2014-09-02 14:27 ` David Jander
2014-09-02 11:32 ` David Jander
2014-09-02 11:38 ` Marc Kleine-Budde
2014-09-02 14:53 ` Marc Kleine-Budde [this message]
2014-08-27 9:58 ` [PATCH 2/3] can: flexcan.c: Re-write receive path to use MB queue instead of FIFO David Jander
2014-09-02 11:30 ` Marc Kleine-Budde
2014-09-02 12:04 ` David Jander
2014-09-02 14:53 ` Marc Kleine-Budde
2014-09-03 7:19 ` David Jander
2014-09-03 9:12 ` Marc Kleine-Budde
2014-09-03 15:42 ` David Jander
2014-08-27 9:58 ` [PATCH 3/3] can: flexcan.c: Implement last step of workaround for errata ERR005829 David Jander
2014-09-02 11:28 ` Marc Kleine-Budde
2014-09-02 11:36 ` David Jander
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5405D9DB.7050101@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=david@protonic.nl \
--cc=linux-can@vger.kernel.org \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).