linux-can.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: David Jander <david@protonic.nl>
Cc: Wolfgang Grandegger <wg@grandegger.com>,
	linux-can@vger.kernel.org,
	Alexander Stein <alexander.stein@systec-electronic.com>
Subject: Re: [PATCH 09/15] can: rx-fifo: Add can_rx_fifo_reset() function
Date: Mon, 03 Nov 2014 13:51:46 +0100	[thread overview]
Message-ID: <54577A62.2010803@pengutronix.de> (raw)
In-Reply-To: <20141103134655.1108332b@archvile>

[-- Attachment #1: Type: text/plain, Size: 2215 bytes --]

On 11/03/2014 01:46 PM, David Jander wrote:
> On Mon, 03 Nov 2014 12:16:24 +0100
> Marc Kleine-Budde <mkl@pengutronix.de> wrote:
> 
>> On 10/10/2014 05:46 PM, David Jander wrote:
>>> This function needs to be called every time the CAN controller is reset
>>> and before interrupts are enabled. Otherwise the irq-offload loop gets
>>> out of sync. Detect this and BUG() to the user if he forgot.
>>>
>>> Signed-off-by: David Jander <david@protonic.nl>
>>> ---
>>>  drivers/net/can/dev.c   | 20 ++++++++++++++++++--
>>>  include/linux/can/dev.h |  1 +
>>>  2 files changed, 19 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
>>> index 3e1160a..fc35d28 100644
>>> --- a/drivers/net/can/dev.c
>>> +++ b/drivers/net/can/dev.c
>>> @@ -487,8 +487,17 @@ int can_rx_fifo_irq_offload(struct can_rx_fifo *fifo)
>>>  		fifo->second_first = true;
>>>  	}
>>>  
>>> -	if (received)
>>> -		napi_schedule(&fifo->napi);
>>> +	if (received) {
>>> +		can_rx_fifo_napi_schedule(fifo);
>>> +	} else {
>>> +		/*
>>> +		 * This should only happen if the CAN conroller was
>>> reset, but
>>> +		 * can_rx_fifo_reset() was not called. BUG();
>>> +		 */
>>> +		netdev_warn(fifo->dev, "%s: No messages found,"
>>> +			    " RX-FIFO out of sync?\n", __func__);
>>> +		BUG();
>>
>> Can you replace the BUG() (which crashes the system) by something less
>> fatal? E.g. by some of the WARN function [1]? Does it make sense to call
>> the fifo_reset() function after this? We'll loose up to a FIFO size
>> amount of CAN frames, but the system stays hopefully working.
> 
> Ok. We just need to make enough noise, so that the potential driver's author
> sees it before release... a WARN*() should do.

ACK, and it will generate a stack-trace, too. However I don't want to
have crashing machines at $CUSTOMER, if there is a subtle bug, what's
not triggered regularly.

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

  reply	other threads:[~2014-11-03 12:51 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-10 15:46 [RFC PATCH V3 00/15] CAN: Add rx-fifo support and port flexcan to it David Jander
2014-10-10 15:46 ` [PATCH 01/15] can: flexcan: add documentation about mailbox organizaiton David Jander
2014-10-10 15:46 ` [PATCH 02/15] can: flexcan: rename crl2 -> ctrl2 David Jander
2014-10-10 15:46 ` [PATCH 03/15] can: flexcan: replace open coded mailbox code by proper defines David Jander
2014-10-10 15:46 ` [PATCH 04/15] can: flexcan: Re-write receive path to use MB queue instead of FIFO David Jander
2014-10-10 15:46 ` [PATCH 05/15] can: dev: add preliminary rx-fifo David Jander
2014-10-10 15:46 ` [PATCH 06/15] can: rx-fifo: Increase MB size limit from 32 to 64 David Jander
2014-10-19 21:25   ` Marc Kleine-Budde
2014-10-20  6:14     ` David Jander
2014-10-10 15:46 ` [PATCH 07/15] can: rx-fifo: Change to do controller off-load in interrupt and NAPI poll David Jander
2014-10-19 22:09   ` Marc Kleine-Budde
2014-10-20  7:06     ` David Jander
2014-11-03 11:10       ` Marc Kleine-Budde
2014-11-03 12:44         ` David Jander
2014-10-10 15:46 ` [PATCH 08/15] can: rx-fifo: fix long lines David Jander
2014-10-19 21:18   ` Marc Kleine-Budde
2014-10-20  7:09     ` David Jander
2014-10-10 15:46 ` [PATCH 09/15] can: rx-fifo: Add can_rx_fifo_reset() function David Jander
2014-11-03 11:16   ` Marc Kleine-Budde
2014-11-03 12:46     ` David Jander
2014-11-03 12:51       ` Marc Kleine-Budde [this message]
2014-10-10 15:46 ` [PATCH 10/15] can: rx-fifo: remove obsolete comment David Jander
2014-10-10 15:46 ` [PATCH 11/15] can: rx-fifo: Add support for can state tracking and error polling David Jander
2014-11-03 11:24   ` Marc Kleine-Budde
2014-11-03 12:51     ` David Jander
2014-11-03 12:58       ` Marc Kleine-Budde
2014-11-03 13:09         ` David Jander
2014-11-03 13:24           ` Marc Kleine-Budde
2014-11-05 17:16             ` David Jander
2014-11-06 10:20               ` Marc Kleine-Budde
2014-11-06 11:07                 ` David Jander
2014-10-10 15:46 ` [PATCH 12/15] can: flexcan: Add support for RX-FIFO David Jander
2014-11-03 11:26   ` Marc Kleine-Budde
2014-11-03 12:55     ` David Jander
2014-11-03 13:34       ` Marc Kleine-Budde
2014-10-10 15:46 ` [PATCH 13/15] can: rx-fifo: Add support for simple irq offloading David Jander
2014-11-03 11:59   ` Marc Kleine-Budde
2014-10-10 15:46 ` [PATCH 14/15] can: flexcan: Add MB/Fifo specific column to comment table of IP versions David Jander
2014-10-10 15:47 ` [PATCH 15/15] can: flexcan: Re-enable RTR reception support for older flexcan IPs David Jander
2014-11-03 12:02   ` Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54577A62.2010803@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=alexander.stein@systec-electronic.com \
    --cc=david@protonic.nl \
    --cc=linux-can@vger.kernel.org \
    --cc=wg@grandegger.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).