linux-can.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Roger Quadros <rogerq@ti.com>
To: Marc Kleine-Budde <mkl@pengutronix.de>, linux-can@vger.kernel.org
Cc: wsa@the-dreams.de, linux-omap@vger.kernel.org, kernel@pengutronix.de
Subject: Re: [PATCH v8 9/9] net: can: c_can: Add support for TI am4372 DCAN
Date: Mon, 17 Nov 2014 16:19:01 +0200	[thread overview]
Message-ID: <546A03D5.5080103@ti.com> (raw)
In-Reply-To: <5469EABB.10506@ti.com>

On 11/17/2014 02:31 PM, Roger Quadros wrote:
> On 11/17/2014 02:12 PM, Marc Kleine-Budde wrote:
>> On 11/17/2014 01:09 PM, Roger Quadros wrote:
>>> AM4372 SoC has 2 DCAN modules. Add compatible id and
>>> raminit driver data for it. The driver data is same as AM3352
>>> but this gives us flexibility to add AM4372 specific quirks
>>> if required later.
>>
>> Strictly speaking we don't need the hunk in
>> "drivers/net/can/c_can/c_can_platform.c" yet, iff the AM4372 dts(i) has
>> this compatible:
>>
>> "ti,am4372-d_can", "ti,am3352-d_can"
> 
> I tried with that, but checkpatch still gives this warning
> WARNING: DT compatible string "ti,am4372-d_can" appears un-documented -- check ./Documentation/devicetree/bindings/
> 
> I guess we can just live with it. Please ignore this patch in that case.

Did you meant that we still need to add it in the binding documentation?
It is not usable by itself so won't it be a problem to exist in documentation?

cheers,
-roger

> 
>>
>>>
>>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>>> ---
>>>  Documentation/devicetree/bindings/net/can/c_can.txt | 3 ++-
>>>  drivers/net/can/c_can/c_can_platform.c              | 1 +
>>>  2 files changed, 3 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt b/Documentation/devicetree/bindings/net/can/c_can.txt
>>> index 6731730..5a1d8b0 100644
>>> --- a/Documentation/devicetree/bindings/net/can/c_can.txt
>>> +++ b/Documentation/devicetree/bindings/net/can/c_can.txt
>>> @@ -4,7 +4,8 @@ Bosch C_CAN/D_CAN controller Device Tree Bindings
>>>  Required properties:
>>>  - compatible		: Should be "bosch,c_can" for C_CAN controllers and
>>>  			  "bosch,d_can" for D_CAN controllers.
>>> -			  Can be "ti,dra7-d_can" or "ti,am3352-d_can".
>>> +			  Can be "ti,dra7-d_can", "ti,am3352-d_can" or
>>> +			  "ti,am4372-d_can".
>>>  - reg			: physical base address and size of the C_CAN/D_CAN
>>>  			  registers map
>>>  - interrupts		: property with a value describing the interrupt
>>> diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
>>> index f4488e5..a4535d2 100644
>>> --- a/drivers/net/can/c_can/c_can_platform.c
>>> +++ b/drivers/net/can/c_can/c_can_platform.c
>>> @@ -235,6 +235,7 @@ static const struct of_device_id c_can_of_table[] = {
>>>  	{ .compatible = "bosch,d_can", .data = &d_can_drvdata },
>>>  	{ .compatible = "ti,dra7-d_can", .data = &dra7_dcan_drvdata },
>>>  	{ .compatible = "ti,am3352-d_can", .data = &am3352_dcan_drvdata },
>>> +	{ .compatible = "ti,am4372-d_can", .data = &am3352_dcan_drvdata },
>>>  	{ /* sentinel */ },
>>>  };
>>>  MODULE_DEVICE_TABLE(of, c_can_of_table);
>>>
>>
>> Marc
>>
> 


  reply	other threads:[~2014-11-17 14:19 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-14 18:09 [PATCH v8 0/8] can: c_can: Use syscon regmap for TI specific RAMINIT register Marc Kleine-Budde
2014-11-14 18:09 ` [PATCH v8 1/8] can: c_can: Add timeout to c_can_hw_raminit_ti() Marc Kleine-Budde
2014-11-14 18:09 ` [PATCH v8 2/8] can: c_can: Introduce c_can_driver_data structure Marc Kleine-Budde
2014-11-14 18:09 ` [PATCH v8 3/8] can: c_can: Add RAMINIT register information to driver data Marc Kleine-Budde
2014-11-14 18:09 ` [PATCH v8 4/8] can: c_can: Add syscon/regmap RAMINIT mechanism Marc Kleine-Budde
2015-01-05  9:18   ` Tomi Valkeinen
2015-01-07  9:56     ` Roger Quadros
2014-11-14 18:09 ` [PATCH v8 5/8] can: c_can: Add support for START pulse in RAMINIT sequence Marc Kleine-Budde
2014-11-14 18:09 ` [PATCH v8 6/8] can: c_can: Disable pins when CAN interface is down Marc Kleine-Budde
2014-11-14 18:09 ` [PATCH v8 7/8] can: c_can: Add support for TI DRA7 DCAN Marc Kleine-Budde
2014-11-14 18:09 ` [PATCH v8 8/8] can: c_can: Add support for TI am3352 DCAN Marc Kleine-Budde
2014-11-17 12:07 ` [PATCH v8 0/8] can: c_can: Use syscon regmap for TI specific RAMINIT register Roger Quadros
2014-11-17 12:09 ` [PATCH v8 9/9] net: can: c_can: Add support for TI am4372 DCAN Roger Quadros
2014-11-17 12:12   ` Marc Kleine-Budde
2014-11-17 12:31     ` Roger Quadros
2014-11-17 14:19       ` Roger Quadros [this message]
2014-11-17 14:31         ` Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=546A03D5.5080103@ti.com \
    --to=rogerq@ti.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mkl@pengutronix.de \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).