* Canplayer play to can0 - problem
@ 2015-10-19 9:14 s-amarce
2015-10-19 9:41 ` Marc Kleine-Budde
0 siblings, 1 reply; 2+ messages in thread
From: s-amarce @ 2015-10-19 9:14 UTC (permalink / raw)
To: linux-can
To whom it may concern,
I am currently trying to play a recorded log-file to my installed device
can0. There are no problems when the data is streamed to the device
using a cable.
I managed to stream the log file to a virtual device executing the
command canplayer can0=3Dvcan0 < file.log.
Using this command I can see all the data using candump vcan0 without
any problems.
However when I try to run: canplayer can0=3Dcan0 < file.log, I receive
the error: "sendto: No buffer space available."
Is it possible to replay logfiles to real devices like can0 or do I have
to use virtual devices?
My ifconfig after reboot:
can0 Link encap:UNSPEC HWaddr
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
UP RUNNING NOARP MTU:16 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:10
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:68
// The error
canplayer can0=3Dcan0 < data.log
sendto: No buffer space available
// After
ifconfig can0
can0 Link encap:UNSPEC HWaddr
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
UP RUNNING NOARP MTU:16 Metric:1
RX packets:2 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:10
RX bytes:16 (16.0 B) TX bytes:0 (0.0 B)
Interrupt:68
I hope you can help me with this. I look forward to hearing from you.
Andreas Marcec
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Canplayer play to can0 - problem
2015-10-19 9:14 Canplayer play to can0 - problem s-amarce
@ 2015-10-19 9:41 ` Marc Kleine-Budde
0 siblings, 0 replies; 2+ messages in thread
From: Marc Kleine-Budde @ 2015-10-19 9:41 UTC (permalink / raw)
To: s-amarce, linux-can
[-- Attachment #1: Type: text/plain, Size: 2838 bytes --]
On 10/19/2015 11:14 AM, s-amarce wrote:
> I am currently trying to play a recorded log-file to my installed device
> can0. There are no problems when the data is streamed to the device
> using a cable.
> I managed to stream the log file to a virtual device executing the
> command canplayer can0=3Dvcan0 < file.log.
> Using this command I can see all the data using candump vcan0 without
> any problems.
> However when I try to run: canplayer can0=3Dcan0 < file.log, I receive
> the error: "sendto: No buffer space available."
> Is it possible to replay logfiles to real devices like can0 or do I have
> to use virtual devices?
>
> My ifconfig after reboot:
> can0 Link encap:UNSPEC HWaddr
> 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
> UP RUNNING NOARP MTU:16 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:10
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
> Interrupt:68
>
> // The error
> canplayer can0=3Dcan0 < data.log
> sendto: No buffer space available
>
> // After
> ifconfig can0
> can0 Link encap:UNSPEC HWaddr
> 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
> UP RUNNING NOARP MTU:16 Metric:1
> RX packets:2 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:10
> RX bytes:16 (16.0 B) TX bytes:0 (0.0 B)
> Interrupt:68
>
> I hope you can help me with this. I look forward to hearing from you.
You have to add a loop like this:
resend:
nbytes = write(s, &frame, mtu);
if (nbytes < 0) {
if (errno != ENOBUFS) {
perror("write");
return -1;
}
/* wait for the write socket (with timeout) */
if (poll(&fds, 1, polltimeout) < 0) {
perror("poll");
return -1;
} else {
goto resend;
}
} else if (nbytes < mtu) {
fprintf(stderr, "write: incomplete CAN frame\n");
return 1;
}
Patches welcome,
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 455 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2015-10-19 9:41 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-10-19 9:14 Canplayer play to can0 - problem s-amarce
2015-10-19 9:41 ` Marc Kleine-Budde
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).