[PATCH v8] can: xilinx: Convert to runtime_pm

[PATCH v8] can: xilinx: Convert to runtime_pm

[Kedareswara rao Appana]

Instead of enabling/disabling clocks at several locations in the driver,
Use the runtime_pm framework. This consolidates the actions for runtime PM
In the appropriate callbacks and makes the driver more readable and mantainable.

Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
---
Changes for v8:
  - Remove pm_runtime_irq_safe() API call from the probe as clk_prepare_enable
    Call canbe called from the atomic context as suggested by Marc.
Changes for v7:
  - Removed the unnecessary clk_prepare/clk_unprepare calls
    From  the probe and remove as suggested by Soren.
Changes for v6:
 - Updated the driver with review comments as suggested by Marc.
Changes for v5:
 - Updated with the review comments.
   Updated the remove fuction to use runtime_pm.
Chnages for v4:
 - Updated with the review comments.
Changes for v3:
  - Converted the driver to use runtime_pm.
Changes for v2:
  - Removed the struct platform_device* from suspend/resume
    as suggest by Lothar

 drivers/net/can/xilinx_can.c | 176 +++++++++++++++++++++++++------------------
 1 file changed, 101 insertions(+), 75 deletions(-)

diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index fc55e8e..ad38065 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -32,6 +32,7 @@
 #include <linux/can/dev.h>
 #include <linux/can/error.h>
 #include <linux/can/led.h>
+#include <linux/pm_runtime.h>
 
 #define DRIVER_NAME	"xilinx_can"
 
@@ -138,7 +139,7 @@ struct xcan_priv {
 	u32 (*read_reg)(const struct xcan_priv *priv, enum xcan_reg reg);
 	void (*write_reg)(const struct xcan_priv *priv, enum xcan_reg reg,
 			u32 val);
-	struct net_device *dev;
+	struct device *dev;
 	void __iomem *reg_base;
 	unsigned long irq_flags;
 	struct clk *bus_clk;
@@ -843,6 +844,13 @@ static int xcan_open(struct net_device *ndev)
 	struct xcan_priv *priv = netdev_priv(ndev);
 	int ret;
 
+	ret = pm_runtime_get_sync(priv->dev);
+	if (ret < 0) {
+		netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
+				__func__, ret);
+		return ret;
+	}
+
 	ret = request_irq(ndev->irq, xcan_interrupt, priv->irq_flags,
 			ndev->name, ndev);
 	if (ret < 0) {
@@ -850,29 +858,17 @@ static int xcan_open(struct net_device *ndev)
 		goto err;
 	}
 
-	ret = clk_prepare_enable(priv->can_clk);
-	if (ret) {
-		netdev_err(ndev, "unable to enable device clock\n");
-		goto err_irq;
-	}
-
-	ret = clk_prepare_enable(priv->bus_clk);
-	if (ret) {
-		netdev_err(ndev, "unable to enable bus clock\n");
-		goto err_can_clk;
-	}
-
 	/* Set chip into reset mode */
 	ret = set_reset_mode(ndev);
 	if (ret < 0) {
 		netdev_err(ndev, "mode resetting failed!\n");
-		goto err_bus_clk;
+		goto err_irq;
 	}
 
 	/* Common open */
 	ret = open_candev(ndev);
 	if (ret)
-		goto err_bus_clk;
+		goto err_irq;
 
 	ret = xcan_chip_start(ndev);
 	if (ret < 0) {
@@ -888,13 +884,11 @@ static int xcan_open(struct net_device *ndev)
 
 err_candev:
 	close_candev(ndev);
-err_bus_clk:
-	clk_disable_unprepare(priv->bus_clk);
-err_can_clk:
-	clk_disable_unprepare(priv->can_clk);
 err_irq:
 	free_irq(ndev->irq, ndev);
 err:
+	pm_runtime_put(priv->dev);
+
 	return ret;
 }
 
@@ -911,12 +905,11 @@ static int xcan_close(struct net_device *ndev)
 	netif_stop_queue(ndev);
 	napi_disable(&priv->napi);
 	xcan_chip_stop(ndev);
-	clk_disable_unprepare(priv->bus_clk);
-	clk_disable_unprepare(priv->can_clk);
 	free_irq(ndev->irq, ndev);
 	close_candev(ndev);
 
 	can_led_event(ndev, CAN_LED_EVENT_STOP);
+	pm_runtime_put(priv->dev);
 
 	return 0;
 }
@@ -935,27 +928,20 @@ static int xcan_get_berr_counter(const struct net_device *ndev,
 	struct xcan_priv *priv = netdev_priv(ndev);
 	int ret;
 
-	ret = clk_prepare_enable(priv->can_clk);
-	if (ret)
-		goto err;
-
-	ret = clk_prepare_enable(priv->bus_clk);
-	if (ret)
-		goto err_clk;
+	ret = pm_runtime_get_sync(priv->dev);
+	if (ret < 0) {
+		netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
+				__func__, ret);
+		return ret;
+	}
 
 	bec->txerr = priv->read_reg(priv, XCAN_ECR_OFFSET) & XCAN_ECR_TEC_MASK;
 	bec->rxerr = ((priv->read_reg(priv, XCAN_ECR_OFFSET) &
 			XCAN_ECR_REC_MASK) >> XCAN_ESR_REC_SHIFT);
 
-	clk_disable_unprepare(priv->bus_clk);
-	clk_disable_unprepare(priv->can_clk);
+	pm_runtime_put(priv->dev);
 
 	return 0;
-
-err_clk:
-	clk_disable_unprepare(priv->can_clk);
-err:
-	return ret;
 }
 
 
@@ -968,15 +954,45 @@ static const struct net_device_ops xcan_netdev_ops = {
 
 /**
  * xcan_suspend - Suspend method for the driver
- * @dev:	Address of the platform_device structure
+ * @dev:	Address of the device structure
  *
  * Put the driver into low power mode.
- * Return: 0 always
+ * Return: 0 on success and failure value on error
  */
 static int __maybe_unused xcan_suspend(struct device *dev)
 {
-	struct platform_device *pdev = dev_get_drvdata(dev);
-	struct net_device *ndev = platform_get_drvdata(pdev);
+	if (!device_may_wakeup(dev))
+		return pm_runtime_force_suspend(dev);
+
+	return 0;
+}
+
+/**
+ * xcan_resume - Resume from suspend
+ * @dev:	Address of the device structure
+ *
+ * Resume operation after suspend.
+ * Return: 0 on success and failure value on error
+ */
+static int __maybe_unused xcan_resume(struct device *dev)
+{
+	if (!device_may_wakeup(dev))
+		return pm_runtime_force_resume(dev);
+
+	return 0;
+
+}
+
+/**
+ * xcan_runtime_suspend - Runtime suspend method for the driver
+ * @dev:	Address of the device structure
+ *
+ * Put the driver into low power mode.
+ * Return: 0 always
+ */
+static int __maybe_unused xcan_runtime_suspend(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
 	struct xcan_priv *priv = netdev_priv(ndev);
 
 	if (netif_running(ndev)) {
@@ -987,43 +1003,55 @@ static int __maybe_unused xcan_suspend(struct device *dev)
 	priv->write_reg(priv, XCAN_MSR_OFFSET, XCAN_MSR_SLEEP_MASK);
 	priv->can.state = CAN_STATE_SLEEPING;
 
-	clk_disable(priv->bus_clk);
-	clk_disable(priv->can_clk);
+	clk_disable_unprepare(priv->bus_clk);
+	clk_disable_unprepare(priv->can_clk);
 
 	return 0;
 }
 
 /**
- * xcan_resume - Resume from suspend
- * @dev:	Address of the platformdevice structure
+ * xcan_runtime_resume - Runtime resume from suspend
+ * @dev:	Address of the device structure
  *
  * Resume operation after suspend.
  * Return: 0 on success and failure value on error
  */
-static int __maybe_unused xcan_resume(struct device *dev)
+static int __maybe_unused xcan_runtime_resume(struct device *dev)
 {
-	struct platform_device *pdev = dev_get_drvdata(dev);
-	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct net_device *ndev = dev_get_drvdata(dev);
 	struct xcan_priv *priv = netdev_priv(ndev);
 	int ret;
+	u32 isr, status;
 
-	ret = clk_enable(priv->bus_clk);
+	ret = clk_prepare_enable(priv->bus_clk);
 	if (ret) {
 		dev_err(dev, "Cannot enable clock.\n");
 		return ret;
 	}
-	ret = clk_enable(priv->can_clk);
+	ret = clk_prepare_enable(priv->can_clk);
 	if (ret) {
 		dev_err(dev, "Cannot enable clock.\n");
 		clk_disable_unprepare(priv->bus_clk);
 		return ret;
 	}
 
-	priv->write_reg(priv, XCAN_MSR_OFFSET, 0);
-	priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_CEN_MASK);
-	priv->can.state = CAN_STATE_ERROR_ACTIVE;
+	priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_RESET_MASK);
+	isr = priv->read_reg(priv, XCAN_ISR_OFFSET);
+	status = priv->read_reg(priv, XCAN_SR_OFFSET);
 
 	if (netif_running(ndev)) {
+		if (isr & XCAN_IXR_BSOFF_MASK) {
+			priv->can.state = CAN_STATE_BUS_OFF;
+			priv->write_reg(priv, XCAN_SRR_OFFSET,
+					XCAN_SRR_RESET_MASK);
+		} else if ((status & XCAN_SR_ESTAT_MASK) ==
+					XCAN_SR_ESTAT_MASK) {
+			priv->can.state = CAN_STATE_ERROR_PASSIVE;
+		} else if (status & XCAN_SR_ERRWRN_MASK) {
+			priv->can.state = CAN_STATE_ERROR_WARNING;
+		} else {
+			priv->can.state = CAN_STATE_ERROR_ACTIVE;
+		}
 		netif_device_attach(ndev);
 		netif_start_queue(ndev);
 	}
@@ -1031,7 +1059,10 @@ static int __maybe_unused xcan_resume(struct device *dev)
 	return 0;
 }
 
-static SIMPLE_DEV_PM_OPS(xcan_dev_pm_ops, xcan_suspend, xcan_resume);
+static const struct dev_pm_ops xcan_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(xcan_suspend, xcan_resume)
+	SET_RUNTIME_PM_OPS(xcan_runtime_suspend, xcan_runtime_resume, NULL)
+};
 
 /**
  * xcan_probe - Platform registration call
@@ -1072,7 +1103,7 @@ static int xcan_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	priv = netdev_priv(ndev);
-	priv->dev = ndev;
+	priv->dev = &pdev->dev;
 	priv->can.bittiming_const = &xcan_bittiming_const;
 	priv->can.do_set_mode = xcan_do_set_mode;
 	priv->can.do_get_berr_counter = xcan_get_berr_counter;
@@ -1114,21 +1145,17 @@ static int xcan_probe(struct platform_device *pdev)
 		}
 	}
 
-	ret = clk_prepare_enable(priv->can_clk);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to enable device clock\n");
-		goto err_free;
-	}
-
-	ret = clk_prepare_enable(priv->bus_clk);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to enable bus clock\n");
-		goto err_unprepare_disable_dev;
-	}
-
 	priv->write_reg = xcan_write_reg_le;
 	priv->read_reg = xcan_read_reg_le;
 
+	pm_runtime_enable(&pdev->dev);
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret < 0) {
+		netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
+			__func__, ret);
+		goto err_pmdisable;
+	}
+
 	if (priv->read_reg(priv, XCAN_SR_OFFSET) != XCAN_SR_CONFIG_MASK) {
 		priv->write_reg = xcan_write_reg_be;
 		priv->read_reg = xcan_read_reg_be;
@@ -1141,22 +1168,23 @@ static int xcan_probe(struct platform_device *pdev)
 	ret = register_candev(ndev);
 	if (ret) {
 		dev_err(&pdev->dev, "fail to register failed (err=%d)\n", ret);
-		goto err_unprepare_disable_busclk;
+		goto err_disableclks;
 	}
 
 	devm_can_led_init(ndev);
-	clk_disable_unprepare(priv->bus_clk);
-	clk_disable_unprepare(priv->can_clk);
+
+	pm_runtime_put(&pdev->dev);
+
 	netdev_dbg(ndev, "reg_base=0x%p irq=%d clock=%d, tx fifo depth:%d\n",
 			priv->reg_base, ndev->irq, priv->can.clock.freq,
 			priv->tx_max);
 
 	return 0;
 
-err_unprepare_disable_busclk:
-	clk_disable_unprepare(priv->bus_clk);
-err_unprepare_disable_dev:
-	clk_disable_unprepare(priv->can_clk);
+err_disableclks:
+	pm_runtime_put(priv->dev);
+err_pmdisable:
+	pm_runtime_disable(&pdev->dev);
 err_free:
 	free_candev(ndev);
 err:
@@ -1175,10 +1203,8 @@ static int xcan_remove(struct platform_device *pdev)
 	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct xcan_priv *priv = netdev_priv(ndev);
 
-	if (set_reset_mode(ndev) < 0)
-		netdev_err(ndev, "mode resetting failed!\n");
-
 	unregister_candev(ndev);
+	pm_runtime_disable(&pdev->dev);
 	netif_napi_del(&priv->napi);
 	free_candev(ndev);
 
-- 
2.1.2

RE: [PATCH v8] can: xilinx: Convert to runtime_pm

[Appana Durga Kedareswara Rao]

Ping!!

> -----Original Message-----
> From: Kedareswara rao Appana [mailto:appana.durga.rao@xilinx.com]
> Sent: Monday, October 26, 2015 11:42 AM
> To: Anirudha Sarangi; wg@grandegger.com; mkl@pengutronix.de; Michal
> Simek; Soren Brinkmann
> Cc: linux-can@vger.kernel.org; netdev@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org; linux-kernel@vger.kernel.org; Appana Durga
> Kedareswara Rao
> Subject: [PATCH v8] can: xilinx: Convert to runtime_pm
> 
> Instead of enabling/disabling clocks at several locations in the driver,
> Use the runtime_pm framework. This consolidates the actions for runtime PM
> In the appropriate callbacks and makes the driver more readable and
> mantainable.
> 
> Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
> ---
> Changes for v8:
>   - Remove pm_runtime_irq_safe() API call from the probe as
> clk_prepare_enable
>     Call canbe called from the atomic context as suggested by Marc.
> Changes for v7:
>   - Removed the unnecessary clk_prepare/clk_unprepare calls
>     From  the probe and remove as suggested by Soren.
> Changes for v6:
>  - Updated the driver with review comments as suggested by Marc.
> Changes for v5:
>  - Updated with the review comments.
>    Updated the remove fuction to use runtime_pm.
> Chnages for v4:
>  - Updated with the review comments.
> Changes for v3:
>   - Converted the driver to use runtime_pm.
> Changes for v2:
>   - Removed the struct platform_device* from suspend/resume
>     as suggest by Lothar
> 
>  drivers/net/can/xilinx_can.c | 176 +++++++++++++++++++++++++-----------------
> -
>  1 file changed, 101 insertions(+), 75 deletions(-)
> 
> diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
> index fc55e8e..ad38065 100644
> --- a/drivers/net/can/xilinx_can.c
> +++ b/drivers/net/can/xilinx_can.c
> @@ -32,6 +32,7 @@
>  #include <linux/can/dev.h>
>  #include <linux/can/error.h>
>  #include <linux/can/led.h>
> +#include <linux/pm_runtime.h>
> 
>  #define DRIVER_NAME	"xilinx_can"
> 
> @@ -138,7 +139,7 @@ struct xcan_priv {
>  	u32 (*read_reg)(const struct xcan_priv *priv, enum xcan_reg reg);
>  	void (*write_reg)(const struct xcan_priv *priv, enum xcan_reg reg,
>  			u32 val);
> -	struct net_device *dev;
> +	struct device *dev;
>  	void __iomem *reg_base;
>  	unsigned long irq_flags;
>  	struct clk *bus_clk;
> @@ -843,6 +844,13 @@ static int xcan_open(struct net_device *ndev)
>  	struct xcan_priv *priv = netdev_priv(ndev);
>  	int ret;
> 
> +	ret = pm_runtime_get_sync(priv->dev);
> +	if (ret < 0) {
> +		netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
> +				__func__, ret);
> +		return ret;
> +	}
> +
>  	ret = request_irq(ndev->irq, xcan_interrupt, priv->irq_flags,
>  			ndev->name, ndev);
>  	if (ret < 0) {
> @@ -850,29 +858,17 @@ static int xcan_open(struct net_device *ndev)
>  		goto err;
>  	}
> 
> -	ret = clk_prepare_enable(priv->can_clk);
> -	if (ret) {
> -		netdev_err(ndev, "unable to enable device clock\n");
> -		goto err_irq;
> -	}
> -
> -	ret = clk_prepare_enable(priv->bus_clk);
> -	if (ret) {
> -		netdev_err(ndev, "unable to enable bus clock\n");
> -		goto err_can_clk;
> -	}
> -
>  	/* Set chip into reset mode */
>  	ret = set_reset_mode(ndev);
>  	if (ret < 0) {
>  		netdev_err(ndev, "mode resetting failed!\n");
> -		goto err_bus_clk;
> +		goto err_irq;
>  	}
> 
>  	/* Common open */
>  	ret = open_candev(ndev);
>  	if (ret)
> -		goto err_bus_clk;
> +		goto err_irq;
> 
>  	ret = xcan_chip_start(ndev);
>  	if (ret < 0) {
> @@ -888,13 +884,11 @@ static int xcan_open(struct net_device *ndev)
> 
>  err_candev:
>  	close_candev(ndev);
> -err_bus_clk:
> -	clk_disable_unprepare(priv->bus_clk);
> -err_can_clk:
> -	clk_disable_unprepare(priv->can_clk);
>  err_irq:
>  	free_irq(ndev->irq, ndev);
>  err:
> +	pm_runtime_put(priv->dev);
> +
>  	return ret;
>  }
> 
> @@ -911,12 +905,11 @@ static int xcan_close(struct net_device *ndev)
>  	netif_stop_queue(ndev);
>  	napi_disable(&priv->napi);
>  	xcan_chip_stop(ndev);
> -	clk_disable_unprepare(priv->bus_clk);
> -	clk_disable_unprepare(priv->can_clk);
>  	free_irq(ndev->irq, ndev);
>  	close_candev(ndev);
> 
>  	can_led_event(ndev, CAN_LED_EVENT_STOP);
> +	pm_runtime_put(priv->dev);
> 
>  	return 0;
>  }
> @@ -935,27 +928,20 @@ static int xcan_get_berr_counter(const struct
> net_device *ndev,
>  	struct xcan_priv *priv = netdev_priv(ndev);
>  	int ret;
> 
> -	ret = clk_prepare_enable(priv->can_clk);
> -	if (ret)
> -		goto err;
> -
> -	ret = clk_prepare_enable(priv->bus_clk);
> -	if (ret)
> -		goto err_clk;
> +	ret = pm_runtime_get_sync(priv->dev);
> +	if (ret < 0) {
> +		netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
> +				__func__, ret);
> +		return ret;
> +	}
> 
>  	bec->txerr = priv->read_reg(priv, XCAN_ECR_OFFSET) &
> XCAN_ECR_TEC_MASK;
>  	bec->rxerr = ((priv->read_reg(priv, XCAN_ECR_OFFSET) &
>  			XCAN_ECR_REC_MASK) >> XCAN_ESR_REC_SHIFT);
> 
> -	clk_disable_unprepare(priv->bus_clk);
> -	clk_disable_unprepare(priv->can_clk);
> +	pm_runtime_put(priv->dev);
> 
>  	return 0;
> -
> -err_clk:
> -	clk_disable_unprepare(priv->can_clk);
> -err:
> -	return ret;
>  }
> 
> 
> @@ -968,15 +954,45 @@ static const struct net_device_ops xcan_netdev_ops
> = {
> 
>  /**
>   * xcan_suspend - Suspend method for the driver
> - * @dev:	Address of the platform_device structure
> + * @dev:	Address of the device structure
>   *
>   * Put the driver into low power mode.
> - * Return: 0 always
> + * Return: 0 on success and failure value on error
>   */
>  static int __maybe_unused xcan_suspend(struct device *dev)
>  {
> -	struct platform_device *pdev = dev_get_drvdata(dev);
> -	struct net_device *ndev = platform_get_drvdata(pdev);
> +	if (!device_may_wakeup(dev))
> +		return pm_runtime_force_suspend(dev);
> +
> +	return 0;
> +}
> +
> +/**
> + * xcan_resume - Resume from suspend
> + * @dev:	Address of the device structure
> + *
> + * Resume operation after suspend.
> + * Return: 0 on success and failure value on error
> + */
> +static int __maybe_unused xcan_resume(struct device *dev)
> +{
> +	if (!device_may_wakeup(dev))
> +		return pm_runtime_force_resume(dev);
> +
> +	return 0;
> +
> +}
> +
> +/**
> + * xcan_runtime_suspend - Runtime suspend method for the driver
> + * @dev:	Address of the device structure
> + *
> + * Put the driver into low power mode.
> + * Return: 0 always
> + */
> +static int __maybe_unused xcan_runtime_suspend(struct device *dev)
> +{
> +	struct net_device *ndev = dev_get_drvdata(dev);
>  	struct xcan_priv *priv = netdev_priv(ndev);
> 
>  	if (netif_running(ndev)) {
> @@ -987,43 +1003,55 @@ static int __maybe_unused xcan_suspend(struct
> device *dev)
>  	priv->write_reg(priv, XCAN_MSR_OFFSET, XCAN_MSR_SLEEP_MASK);
>  	priv->can.state = CAN_STATE_SLEEPING;
> 
> -	clk_disable(priv->bus_clk);
> -	clk_disable(priv->can_clk);
> +	clk_disable_unprepare(priv->bus_clk);
> +	clk_disable_unprepare(priv->can_clk);
> 
>  	return 0;
>  }
> 
>  /**
> - * xcan_resume - Resume from suspend
> - * @dev:	Address of the platformdevice structure
> + * xcan_runtime_resume - Runtime resume from suspend
> + * @dev:	Address of the device structure
>   *
>   * Resume operation after suspend.
>   * Return: 0 on success and failure value on error
>   */
> -static int __maybe_unused xcan_resume(struct device *dev)
> +static int __maybe_unused xcan_runtime_resume(struct device *dev)
>  {
> -	struct platform_device *pdev = dev_get_drvdata(dev);
> -	struct net_device *ndev = platform_get_drvdata(pdev);
> +	struct net_device *ndev = dev_get_drvdata(dev);
>  	struct xcan_priv *priv = netdev_priv(ndev);
>  	int ret;
> +	u32 isr, status;
> 
> -	ret = clk_enable(priv->bus_clk);
> +	ret = clk_prepare_enable(priv->bus_clk);
>  	if (ret) {
>  		dev_err(dev, "Cannot enable clock.\n");
>  		return ret;
>  	}
> -	ret = clk_enable(priv->can_clk);
> +	ret = clk_prepare_enable(priv->can_clk);
>  	if (ret) {
>  		dev_err(dev, "Cannot enable clock.\n");
>  		clk_disable_unprepare(priv->bus_clk);
>  		return ret;
>  	}
> 
> -	priv->write_reg(priv, XCAN_MSR_OFFSET, 0);
> -	priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_CEN_MASK);
> -	priv->can.state = CAN_STATE_ERROR_ACTIVE;
> +	priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_RESET_MASK);
> +	isr = priv->read_reg(priv, XCAN_ISR_OFFSET);
> +	status = priv->read_reg(priv, XCAN_SR_OFFSET);
> 
>  	if (netif_running(ndev)) {
> +		if (isr & XCAN_IXR_BSOFF_MASK) {
> +			priv->can.state = CAN_STATE_BUS_OFF;
> +			priv->write_reg(priv, XCAN_SRR_OFFSET,
> +					XCAN_SRR_RESET_MASK);
> +		} else if ((status & XCAN_SR_ESTAT_MASK) ==
> +					XCAN_SR_ESTAT_MASK) {
> +			priv->can.state = CAN_STATE_ERROR_PASSIVE;
> +		} else if (status & XCAN_SR_ERRWRN_MASK) {
> +			priv->can.state = CAN_STATE_ERROR_WARNING;
> +		} else {
> +			priv->can.state = CAN_STATE_ERROR_ACTIVE;
> +		}
>  		netif_device_attach(ndev);
>  		netif_start_queue(ndev);
>  	}
> @@ -1031,7 +1059,10 @@ static int __maybe_unused xcan_resume(struct
> device *dev)
>  	return 0;
>  }
> 
> -static SIMPLE_DEV_PM_OPS(xcan_dev_pm_ops, xcan_suspend, xcan_resume);
> +static const struct dev_pm_ops xcan_dev_pm_ops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(xcan_suspend, xcan_resume)
> +	SET_RUNTIME_PM_OPS(xcan_runtime_suspend, xcan_runtime_resume,
> NULL)
> +};
> 
>  /**
>   * xcan_probe - Platform registration call
> @@ -1072,7 +1103,7 @@ static int xcan_probe(struct platform_device *pdev)
>  		return -ENOMEM;
> 
>  	priv = netdev_priv(ndev);
> -	priv->dev = ndev;
> +	priv->dev = &pdev->dev;
>  	priv->can.bittiming_const = &xcan_bittiming_const;
>  	priv->can.do_set_mode = xcan_do_set_mode;
>  	priv->can.do_get_berr_counter = xcan_get_berr_counter;
> @@ -1114,21 +1145,17 @@ static int xcan_probe(struct platform_device
> *pdev)
>  		}
>  	}
> 
> -	ret = clk_prepare_enable(priv->can_clk);
> -	if (ret) {
> -		dev_err(&pdev->dev, "unable to enable device clock\n");
> -		goto err_free;
> -	}
> -
> -	ret = clk_prepare_enable(priv->bus_clk);
> -	if (ret) {
> -		dev_err(&pdev->dev, "unable to enable bus clock\n");
> -		goto err_unprepare_disable_dev;
> -	}
> -
>  	priv->write_reg = xcan_write_reg_le;
>  	priv->read_reg = xcan_read_reg_le;
> 
> +	pm_runtime_enable(&pdev->dev);
> +	ret = pm_runtime_get_sync(&pdev->dev);
> +	if (ret < 0) {
> +		netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
> +			__func__, ret);
> +		goto err_pmdisable;
> +	}
> +
>  	if (priv->read_reg(priv, XCAN_SR_OFFSET) != XCAN_SR_CONFIG_MASK) {
>  		priv->write_reg = xcan_write_reg_be;
>  		priv->read_reg = xcan_read_reg_be;
> @@ -1141,22 +1168,23 @@ static int xcan_probe(struct platform_device
> *pdev)
>  	ret = register_candev(ndev);
>  	if (ret) {
>  		dev_err(&pdev->dev, "fail to register failed (err=%d)\n", ret);
> -		goto err_unprepare_disable_busclk;
> +		goto err_disableclks;
>  	}
> 
>  	devm_can_led_init(ndev);
> -	clk_disable_unprepare(priv->bus_clk);
> -	clk_disable_unprepare(priv->can_clk);
> +
> +	pm_runtime_put(&pdev->dev);
> +
>  	netdev_dbg(ndev, "reg_base=0x%p irq=%d clock=%d, tx fifo
> depth:%d\n",
>  			priv->reg_base, ndev->irq, priv->can.clock.freq,
>  			priv->tx_max);
> 
>  	return 0;
> 
> -err_unprepare_disable_busclk:
> -	clk_disable_unprepare(priv->bus_clk);
> -err_unprepare_disable_dev:
> -	clk_disable_unprepare(priv->can_clk);
> +err_disableclks:
> +	pm_runtime_put(priv->dev);
> +err_pmdisable:
> +	pm_runtime_disable(&pdev->dev);
>  err_free:
>  	free_candev(ndev);
>  err:
> @@ -1175,10 +1203,8 @@ static int xcan_remove(struct platform_device
> *pdev)
>  	struct net_device *ndev = platform_get_drvdata(pdev);
>  	struct xcan_priv *priv = netdev_priv(ndev);
> 
> -	if (set_reset_mode(ndev) < 0)
> -		netdev_err(ndev, "mode resetting failed!\n");
> -
>  	unregister_candev(ndev);
> +	pm_runtime_disable(&pdev->dev);
>  	netif_napi_del(&priv->napi);
>  	free_candev(ndev);
> 
> --
> 2.1.2

Re: [PATCH v8] can: xilinx: Convert to runtime_pm

[Marc Kleine-Budde]

On 10/26/2015 07:11 AM, Kedareswara rao Appana wrote:
> Instead of enabling/disabling clocks at several locations in the driver,
> Use the runtime_pm framework. This consolidates the actions for runtime PM
> In the appropriate callbacks and makes the driver more readable and mantainable.
> 
> Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>

Applied to can-next.

thanks,
Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |