From: Holger Schurig <holgerschurig@gmail.com>
To: Marc Kleine-Budde <mkl@pengutronix.de>, linux-can@vger.kernel.org
Subject: Re: [PATCH v2 00/12] can: rx-offload: add implmentation and switch flexcan driver to use it
Date: Tue, 04 Oct 2016 08:32:15 +0200 [thread overview]
Message-ID: <87zimk8w0g.fsf@gmail.com> (raw)
In-Reply-To: <878tv48bhm.fsf@gmail.com>
Holger Schurig <holgerschurig@gmail.com> writes:
> Then they did same CAN ping-ping test with reboots and wrote: "Out of
> about 16,000 reboots we had one failure. This failed both CAN interfaces
> and the logs show that the PTX-C received all CAN messages and returned
> them, but the test machine for some reason did not receive any CAN
> messages."
It turned out that the error was not in the FlexCAN + rx-fifo patches,
but at the receiving end.
So you can have a "Tested-By: Holger Schurig <holgerschurig@gmail.com>"
for your patch series on top of 4.7.5.
next prev parent reply other threads:[~2016-10-04 6:32 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-04 18:32 [PATCH v2 00/12] can: rx-offload: add implmentation and switch flexcan driver to use it Marc Kleine-Budde
2016-07-04 18:32 ` [PATCH v2 01/12] can: rx-offload: Add support for HW fifo based irq offloading Marc Kleine-Budde
2016-07-04 18:32 ` [PATCH v2 02/12] can: rx-offload: Add support for timestamp " Marc Kleine-Budde
2016-07-04 18:49 ` Andri Yngvason
2016-07-04 20:59 ` Marc Kleine-Budde
2016-07-04 22:30 ` Marc Kleine-Budde
2016-07-05 11:58 ` Andri Yngvason
2016-07-05 12:40 ` Marc Kleine-Budde
2016-07-05 5:46 ` Alexander Stein
2016-07-05 6:19 ` Marc Kleine-Budde
2016-07-05 6:31 ` David Jander
2016-07-05 7:21 ` Marc Kleine-Budde
2016-07-04 18:32 ` [PATCH v2 03/12] can: flexcan: remove write-only member pdata of struct flexcan_priv Marc Kleine-Budde
2016-07-04 18:32 ` [PATCH v2 04/12] can: flexcan: make declaration of devtype_data const Marc Kleine-Budde
2016-07-04 18:32 ` [PATCH v2 05/12] can: flexcan: calculate default value for imask1 during runtime Marc Kleine-Budde
2016-07-04 18:32 ` [PATCH v2 06/12] can: flexcan: make TX mailbox selectable " Marc Kleine-Budde
2016-07-04 18:32 ` [PATCH v2 07/12] can: flexcan: make use of rx-offload's irq_offload_fifo Marc Kleine-Budde
2016-07-04 18:32 ` [PATCH v2 08/12] can: flexcan: add missing register definitions Marc Kleine-Budde
2016-07-04 18:32 ` [PATCH v2 09/12] can: flexcan: activate individual RX masking and initialize reg_rximr Marc Kleine-Budde
2016-07-04 18:32 ` [PATCH v2 10/12] can: flexcan: add quirk FLEXCAN_QUIRK_ENABLE_EACEN_RRS Marc Kleine-Budde
2016-07-04 18:32 ` [PATCH v2 11/12] can: flexcan: add support for timestamp based rx-offload Marc Kleine-Budde
2016-07-04 18:32 ` [PATCH v2 12/12] can: flexcan: switch imx6 and vf610 to timestamp based offloading Marc Kleine-Budde
2016-07-13 7:28 ` [PATCH v2 00/12] can: rx-offload: add implmentation and switch flexcan driver to use it Mirza Krak
2016-07-13 7:46 ` Marc Kleine-Budde
2016-09-07 6:33 ` Holger Schurig
2016-10-04 6:32 ` Holger Schurig [this message]
2016-10-04 11:57 ` Alexander Stein
2016-10-04 12:33 ` David Jander
2016-10-05 12:37 ` Alexander Stein
2016-11-30 14:22 ` Alexander Stein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87zimk8w0g.fsf@gmail.com \
--to=holgerschurig@gmail.com \
--cc=linux-can@vger.kernel.org \
--cc=mkl@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).