messages from 2015-11-02 20:34:39 to 2016-01-20 14:11:28 UTC [more...]
[PATCH] can/peak_pci: fix FPGA potential frame loss issue
2016-01-20 14:11 UTC (2+ messages)
[PATCH v2] can: c_can: add xceiver enable/disable support
2016-01-20 14:01 UTC (2+ messages)
[PATCH] can: c_can: add xceiver enable/disable support
2016-01-20 11:55 UTC
(unknown),
2016-01-20 10:23 UTC (4+ messages)
` [PATCH v5 1/3] can: sja1000: of: add per-compatible init hook
` [PATCH v5 2/3] can: sja1000: add documentation for Technologic Systems version
` [PATCH v5 3/3] can: sja1000: of: add compatibility with "
[PATCH v4 0/3] can: sja1000: support for technologic version
2016-01-20 10:22 UTC (7+ messages)
` [PATCH v4 1/3] can: sja1000: of: add per-compatible init hook
` [PATCH v4 2/3] can: sja1000: add documentation for Technologic Systems version
` [PATCH v4 3/3] can: sja1000: of: add compatibility with "
[PATCH v2 00/11] RFC: cleanup flexcan driver, introduce and make use of IRQ offloading
2016-01-19 0:26 UTC (16+ messages)
` [PATCH v2 01/11] can: flexcan: calculate default value for imask1 during runtime
` [PATCH v2 02/11] can: flexcan: make TX mailbox selectable "
` [PATCH v2 03/11] can: rx-fifo: Add support for simple irq offloading
` [PATCH v2 04/11] can: flexcan: make use of rx-fifo's irq_offload_simple
` [PATCH v2 05/11] can: flexcan: add missing register definitions
` [PATCH v2 06/11] can: flexcan: activate individual RX masking and initialize reg_rximr
` [PATCH v2 07/11] can: flexcan: add quirk FLEXCAN_QUIRK_ENABLE_EACEN_RRS
` [PATCH v2 08/11] can: flexcan: reg_imask2_default
` [PATCH v2 09/11] can: rx-fifo: introduce software rx-fifo implementation
` [PATCH v2 10/11] can: flexcan: add support for rx-fifo based software FIFO implementation
` [PATCH v2 11/11] can: flexcan: switch imx6 and vf610 to software based fifo
Urgent Matter
2016-01-18 19:51 UTC
(unknown),
2016-01-14 3:01 UTC
[PATCH v3 0/3] can: sja1000: support for technologic version
2016-01-13 11:21 UTC (5+ messages)
` [PATCH v3 1/3] can: sja1000: of: add per-compatible init hook
` [PATCH v3 2/3] can: sja1000: add documentation for Technologic Systems version
` [PATCH v3 3/3] can: sja1000: of: add compatibility with "
[PATCH v2 0/3] can: sja1000: support for technologic version
2016-01-12 16:24 UTC (11+ messages)
` [PATCH v2 1/3] can: sja1000: of: add per-compatible init hook
` [PATCH v2 2/3] can: sja1000: add documentation for Technologic Systems version
` [PATCH v2 3/3] can: sja1000: of: add compatibility with "
Please get back
2016-01-11 19:32 UTC
Assalam o Alaikum
2015-12-29 2:02 UTC
Charity Donation
2015-12-28 23:22 UTC
Charity Donation
2015-12-28 21:43 UTC
Setting bitrate from user-space application
2015-12-23 14:10 UTC (10+ messages)
[PATCH v2 0/5] Add flexcan support for LS1021A SoCs
2015-12-23 0:53 UTC (13+ messages)
` [PATCH v2 5/5] can: flexcan: Add support for non RX-FIFO mode
` can: flexcan: Ancient Freescale Reference FlexCAN Driver and bug fixes so it works
[PATCH 1/2] can: sja1000: add documentation for Technologic Systems version
2015-12-22 18:28 UTC (8+ messages)
` [PATCH 2/2] can: sja1000: of: add compatibility with "
[PATCH 1/1]can:ems_usb:Fix possible tx overflow
2015-12-22 16:29 UTC
peak_pci: TX Frame Loss
2015-12-22 11:51 UTC (17+ messages)
` [BULK]Re: "
[RFC PATCH] can: sja1000: of: add per-compatible init hook
2015-12-19 17:11 UTC
Connecting mcp2515 to Linux
2015-12-18 14:23 UTC
(unknown),
2015-12-18 2:32 UTC
Hardware Loopback on RT-Socket-CAN Needed
2015-12-17 18:31 UTC (5+ messages)
SocketCAN timestamps
2015-12-10 18:29 UTC (5+ messages)
` [PATCH] can-doc: Add hint about getting timestamps
[PATCH 00/12] RFC: cleanup flexcan driver, introduce and make use of IRQ offloading
2015-12-10 12:21 UTC (3+ messages)
` [PATCH 12/12] can: flexcan: make use of rx-fifos's irq_offload_simple
J1939 send causes call trace dump
2015-12-09 10:54 UTC (5+ messages)
(unknown),
2015-12-08 16:13 UTC
J1939 crash after receiving BAM frame and no DT frame
2015-12-04 14:04 UTC (9+ messages)
pull-request: can-next 2015-11-23
2015-11-24 19:23 UTC (2+ messages)
pull-request: can 2015-11-23
2015-11-24 19:22 UTC (5+ messages)
` [PATCH 1/3] can: sja1000: clear interrupts on start
` [PATCH 2/3] can: fix assignment of error location in CAN error messages
` [PATCH 3/3] can: remove obsolete assignment for CAN protocol error type
[PATCH 1/2] can: fix assignment of error location in CAN error messages
2015-11-23 8:47 UTC (3+ messages)
` [PATCH 2/2] [RFC] can: remove obsolete assignment for CAN protocol error type
can: kvaser_usb: Add support for Kvaser CAN/USB devices
2015-11-21 13:39 UTC (7+ messages)
Can support at Linux LXC?
2015-11-21 12:57 UTC (3+ messages)
[PATCH 0/2] can: m_can: Add CAN clock generated by UPLLCK support
2015-11-19 4:25 UTC (7+ messages)
` [PATCH 1/2] can: m_can: Increase delay to ensure written INIT accepted
` [PATCH 2/2] can: m_can: Add CAN clock generated by UPLLCK support
[can-utils] J1939 v6 (#7)
2015-11-17 8:43 UTC (18+ messages)
` can-j1939 API
` "
j1939 (Higher Layer Protocols)
2015-11-16 13:14 UTC (6+ messages)
usb_8dev: Initialisation issue with powered USB 2.0 hub
2015-11-13 20:20 UTC (9+ messages)
` [SOLVED] "
[PATCH] can-doc: Add missing semicolon to example
2015-11-13 20:00 UTC (4+ messages)
can-j1939: semantics question
2015-11-12 8:39 UTC (3+ messages)
[PATCH 1/1] can: sja1000: clear interrupts on start
2015-11-11 12:49 UTC (9+ messages)
[PATCH v8] can: xilinx: Convert to runtime_pm
2015-11-10 20:36 UTC (3+ messages)
API to support hardware priorities (was: Re: API zur hardwareunterstützten Priorisierung von CAN-Paketen)
2015-11-09 16:36 UTC (6+ messages)
` API to support hardware priorities
AW: can-isotp-modules
2015-11-06 5:59 UTC
can-j1939 with Linux kernel >= 4.1.6
2015-11-05 22:36 UTC (2+ messages)
AW: can-isotp-modules
2015-11-04 18:29 UTC (2+ messages)
can-isotp-modules
2015-11-04 10:06 UTC (3+ messages)
pull-request: can 2015-10-30
2015-11-02 20:34 UTC (2+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).