messages from 2022-02-22 15:48:41 to 2022-03-09 16:25:27 UTC [more...]
[PATCH AUTOSEL 5.16 15/27] can: rcar_canfd: rcar_canfd_channel_probe(): register the CAN device when fully ready
2022-03-09 16:16 UTC
[RFC]: can-next gs-usb
2022-03-09 14:20 UTC (26+ messages)
` [can-next-rfc 01/21] can: gs_usb: use consistent one space indention
` [can-next-rfc 02/21] can: gs_usb: fix checkpatch warning
` [can-next-rfc 03/21] can: gs_usb: sort include files alphabetically
` [can-next-rfc 04/21] can: gs_usb: GS_CAN_FLAG_OVERFLOW: make use of BIT()
` [can-next-rfc 05/21] can: gs_usb: rewrap error messages
` [can-next-rfc 06/21] can: gs_usb: rewrap usb_control_msg() and usb_fill_bulk_urb()
` [can-next-rfc 07/21] can: gs_usb: gs_make_candev(): call SET_NETDEV_DEV() after handling all bt_const->feature
` [can-next-rfc 08/21] can: gs_usb: add HW timestamp mode bit
` [can-next-rfc 09/21] can: gs_usb: update GS_CAN_FEATURE_IDENTIFY documentation
` [can-next-rfc 10/21] can: gs_usb: document the USER_ID feature
` [can-next-rfc 11/21] can: gs_usb: document the PAD_PKTS_TO_MAX_PKT_SIZE feature
` [can-next-rfc 12/21] can: gs_usb: gs_usb_probe(): introduce udev and make use of it
` [can-next-rfc 13/21] can: gs_usb: support up to 3 channels per device
` [can-next-rfc 14/21] can: gs_usb: use union and FLEX_ARRAY for data in struct gs_host_frame
` [can-next-rfc 15/21] can: gs_usb: add CAN-FD support
` [can-next-rfc 16/21] can: gs_usb: add usb quirk for NXP LPC546xx controllers
` [can-next-rfc 17/21] can: gs_usb: add quirk for CANtact Pro overlapping GS_USB_BREQ value
` [can-next-rfc 18/21] can: gs_usb: activate quirks for CANtact Pro unconditionally
` [can-next-rfc 19/21] can: gs_usb: add extended bt_const feature
` [can-next-rfc 20/21] can: gs_usb: add VID/PID for CES CANext FD devices
` [can-next-rfc 21/21] can: gs_usb: add VID/PID for ABE CAN Debugger devices
[PATCH v3] can, tty: elmcan CAN/ldisc driver for ELM327 based OBD-II adapters
2022-03-09 13:49 UTC (6+ messages)
[can-next v2 1/5] can: isotp: add local echo tx processing for consecutive frames
2022-03-09 12:04 UTC (5+ messages)
` [can-next v2 2/5] can: isotp: set default value for N_As to 50 micro seconds
` [can-next v2 3/5] can: isotp: set max PDU size to 64 kByte
` [can-next v2 4/5] vxcan: remove sk reference in peer skb
` [can-next v2 5/5] vxcan: enable local echo for sent CAN frames
[mkl-can-next:mcp251xfd-coalesce 13/13] drivers/net/can/spi/mcp251xfd/mcp251xfd-ring.c:15: warning: "DEBUG" redefined
2022-03-09 11:19 UTC (2+ messages)
[RFC]: can: mcp251xfd: coalescing support
2022-03-09 10:57 UTC (14+ messages)
` [can-next-rfc 01/13] can: mcp251xfd: mcp251xfd_ring_init(): fix debug info
` [can-next-rfc 02/13] can: mcp251xfd: ring: add helper functions for dynamic ring size calculation
` [can-next-rfc 03/13] can: mcp251xfd: can_ram_get_layout() add coalescing support
` [can-next-rfc 04/13] can: mcp251xfd: ethtool: add support
` [can-next-rfc 05/13] can: mcp251xfd: ring: prepare support for runtime configurable RX/TX ring sizes
` [can-next-rfc 06/13] can: mcp251xfd: use new defines
` [can-next-rfc 07/13] can: mcp251xfd: ring: add support for runtime configurable RX/TX ring sizes
` [can-next-rfc 08/13] can: mcp251xfd: add RX coalesce support
` [can-next-rfc 09/13] can: mcp251xfd: add RX coalesce ethtool support
` [can-next-rfc 10/13] can: mcp251xfd: add TX coalesce support
` [can-next-rfc 11/13] can: mcp251xfd: add TX coalesce ethtool support
` [can-next-rfc 12/13] can: mcp251xfd: ring: increase number of RX-FIFOs to 3 and increase max TX-FIFO depth to 16
` [can-next-rfc 13/13] can: mcp251xfd: mcp251xfd-ring: enable DEBUG for now to print FIFO configuration overview during ifup
[can-next 1/3] can: isotp: add local echo tx processing for consecutive frames
2022-03-09 9:52 UTC (4+ messages)
` [can-next 2/3] can: isotp: set default value for N_As to 50 micro seconds
` [can-next 3/3] can: isotp: set max PDU size to 64 kByte
[PATCH v4] phy: phy-can-transceiver: Add support for setting mux
2022-03-09 6:04 UTC
[PATCH RFT] can: mcba_usb: properly check endpoint type
2022-03-09 2:58 UTC (6+ messages)
` [PATCH v2] "
[PATCH v3 0/2] CAN: Add support for setting mux
2022-03-08 16:39 UTC (3+ messages)
` [PATCH v3 1/2] dt-bindings: phy: ti,tcan104x-can: Document mux-states property
` [PATCH v3 1/2] dt-bindings: phy: ti, tcan104x-can: "
[can-next 1/2] vxcan: remove sk reference in peer skb
2022-03-07 16:56 UTC (2+ messages)
` [can-next 2/2] vxcan: enable local echo for sent CAN frames
[PATCH] drivers: Fix Links to Technologic Systems web resources
2022-03-07 9:22 UTC (3+ messages)
[PATCH] can: etas_es58x: initialize rx_event_msg before calling es58x_check_msg_len()
2022-03-07 8:41 UTC (3+ messages)
Queries on CAN frame work
2022-03-06 14:47 UTC (8+ messages)
[PATCH net-next 0/8] net: Convert user to netif_rx(), part 2
2022-03-06 11:40 UTC (5+ messages)
` [PATCH net-next 2/8] can: Use netif_rx()
drivers/net/can/usb/etas_es58x/es58x_fd.c:174:8: warning: Uninitialized variable: rx_event_msg [uninitvar]
2022-03-02 14:47 UTC (4+ messages)
[PATCH] dt-bindings: net: can: renesas,rcar-canfd: Document RZ/V2L SoC
2022-03-02 13:57 UTC (5+ messages)
[PATCH 0/5] spi: make remove callback a void function
2022-03-02 7:30 UTC (2+ messages)
` [PATCH 5/5] "
[PATCH] can: usb: delete a redundant dev_kfree_skb() in ems_usb_start_xmit()
2022-02-28 10:47 UTC (5+ messages)
[PATCH] can: usb: fix a possible memory leak in esd_usb2_start_xmit
2022-02-28 8:06 UTC (5+ messages)
[PATCH net 0/3] pull-request: can 2022-02-25
2022-02-25 23:10 UTC (5+ messages)
` [PATCH net 1/3] can: etas_es58x: change opened_channel_cnt's type from atomic_t to u8
` [PATCH net 2/3] can: gs_usb: change active_channels's "
` [PATCH net 3/3] can: rcar_canfd: rcar_canfd_channel_probe(): register the CAN device when fully ready
[PATCH] can: rcar_canfd: Register the CAN device when fully ready
2022-02-25 16:47 UTC (2+ messages)
can: m_can: m_can_isr IR_ERR_ALL_30X
2022-02-25 16:42 UTC (3+ messages)
` [PATCH] can: m_can: m_can_isr: IR_ERR_ALL_30X
[PATCH net-next] dt-binding: can: m_can: fix indention of table in bosch,mram-cfg description
2022-02-25 16:33 UTC (2+ messages)
[PATCH net-next 0/36] pull-request: can-next 2022-02-24
2022-02-24 11:00 UTC (38+ messages)
` [PATCH net-next 01/36] dt-binding: can: mcp251xfd: include common CAN controller bindings
` [PATCH net-next 02/36] dt-binding: can: sun4i_can: "
` [PATCH net-next 03/36] dt-binding: can: m_can: list Chandrasekar Ramakrishnan as maintainer
` [PATCH net-next 04/36] dt-binding: can: m_can: fix indention of table in bosch,mram-cfg description
` [PATCH net-next 05/36] dt-binding: can: m_can: include common CAN controller bindings
` [PATCH net-next 06/36] can: gw: use call_rcu() instead of costly synchronize_rcu()
` [PATCH net-next 07/36] can: bittiming: can_validate_bitrate(): simplify bit rate checking
` [PATCH net-next 08/36] can: bittiming: mark function arguments and local variables as const
` [PATCH net-next 09/36] can: kvaser_usb: kvaser_usb_send_cmd(): remove redundant variable actual_len
` [PATCH net-next 10/36] can: c_can: ethtool: use default drvinfo
` [PATCH net-next 11/36] can: softing: softing_netdev_open(): remove redundant ret variable
` [PATCH net-next 12/36] can: xilinx_can: Add check for NAPI Poll function
` [PATCH net-next 13/36] can: etas_es58x: use BITS_PER_TYPE() instead of manual calculation
` [PATCH net-next 14/36] can: mcp251xfd: mcp251xfd_reg_invalid(): rename from mcp251xfd_osc_invalid()
` [PATCH net-next 15/36] can: mcp251xfd: mcp251xfd_regmap_crc_read(): ignore CRC error only if solely OSC register is read
` [PATCH net-next 16/36] can: mcp251xfd: mcp251xfd_unregister(): simplify runtime PM handling
` [PATCH net-next 17/36] can: mcp251xfd: mcp251xfd_chip_sleep(): introduce function to bring chip into sleep mode
` [PATCH net-next 18/36] can: mcp251xfd: mcp251xfd_chip_stop(): convert to a void function
` [PATCH net-next 19/36] can: mcp251xfd: mcp251xfd_chip_wait_for_osc_ready(): factor out into separate function
` [PATCH net-next 20/36] can: mcp251xfd: mcp251xfd_chip_wait_for_osc_ready(): improve chip detection and error handling
` [PATCH net-next 21/36] can: mcp251xfd: mcp251xfd_chip_wait_for_osc_ready(): prepare for PLL support
` [PATCH net-next 22/36] can: mcp251xfd: mcp251xfd_chip_softreset_check(): wait for OSC ready before accessing chip
` [PATCH net-next 23/36] can: mcp251xfd: mcp251xfd_chip_timestamp_init(): factor out into separate function
` [PATCH net-next 24/36] can: mcp251xfd: mcp251xfd_chip_wake(): renamed from mcp251xfd_chip_clock_enable()
` [PATCH net-next 25/36] can: mcp251xfd: __mcp251xfd_chip_set_mode(): prepare for PLL support: improve error handling and diagnostics
` [PATCH net-next 26/36] can: mcp251xfd: mcp251xfd_chip_clock_init(): prepare for PLL support, wait for OSC ready
` [PATCH net-next 27/36] can: mcp251xfd: mcp251xfd_register(): prepare to activate PLL after softreset
` [PATCH net-next 28/36] can: mcp251xfd: add support for internal PLL
` [PATCH net-next 29/36] can: mcp251xfd: introduce struct mcp251xfd_tx_ring::nr and ::fifo_nr and make use of it
` [PATCH net-next 30/36] can: mcp251xfd: mcp251xfd_ring_init(): split ring_init into separate functions
` [PATCH net-next 31/36] can: mcp251xfd: ring: prepare to change order of TX and RX FIFOs
` [PATCH net-next 32/36] can: mcp251xfd: ring: "
` [PATCH net-next 33/36] can: mcp251xfd: ring: mcp251xfd_ring_init(): checked RAM usage of ring setup
` [PATCH net-next 34/36] can: mcp251xfd: ring: update FIFO setup debug info
` [PATCH net-next 35/36] can: mcp251xfd: prepare for multiple RX-FIFOs
` [PATCH net-next 36/36] can: mcp251xfd: mcp251xfd_priv: introduce macros specifying the number of supported TEF/RX/TX rings
[PATCH net-next 0/36] pull-request: can-next 2022-02-22
2022-02-24 8:33 UTC (39+ messages)
` [PATCH net-next 01/36] dt-binding: can: mcp251xfd: include common CAN controller bindings
` [PATCH net-next 02/36] dt-binding: can: sun4i_can: "
` [PATCH net-next 03/36] dt-binding: can: m_can: list Chandrasekar Ramakrishnan as maintainer
` [PATCH net-next 04/36] dt-binding: can: m_can: fix indention of table in bosch,mram-cfg description
` [PATCH net-next 05/36] dt-binding: can: m_can: include common CAN controller bindings
` [PATCH net-next 06/36] can: gw: use call_rcu() instead of costly synchronize_rcu()
` [PATCH net-next 07/36] can: bittiming: can_validate_bitrate(): simplify bit rate checking
` [PATCH net-next 08/36] can: bittiming: mark function arguments and local variables as const
` [PATCH net-next 09/36] can: kvaser_usb: kvaser_usb_send_cmd(): remove redundant variable actual_len
` [PATCH net-next 10/36] can: c_can: ethtool: use default drvinfo
` [PATCH net-next 11/36] can: softing: softing_netdev_open(): remove redundant ret variable
` [PATCH net-next 12/36] can: xilinx_can: Add check for NAPI Poll function
` [PATCH net-next 13/36] can: etas_es58x: use BITS_PER_TYPE() instead of manual calculation
` [PATCH net-next 14/36] can: mcp251xfd: mcp251xfd_reg_invalid(): rename from mcp251xfd_osc_invalid()
` [PATCH net-next 15/36] can: mcp251xfd: mcp251xfd_regmap_crc_read(): ignore CRC error only if solely OSC register is read
` [PATCH net-next 16/36] can: mcp251xfd: mcp251xfd_unregister(): simplify runtime PM handling
` [PATCH net-next 17/36] can: mcp251xfd: mcp251xfd_chip_sleep(): introduce function to bring chip into sleep mode
` [PATCH net-next 18/36] can: mcp251xfd: mcp251xfd_chip_stop(): convert to a void function
` [PATCH net-next 19/36] can: mcp251xfd: mcp251xfd_chip_wait_for_osc_ready(): factor out into separate function
` [PATCH net-next 20/36] can: mcp251xfd: mcp251xfd_chip_wait_for_osc_ready(): improve chip detection and error handling
` [PATCH net-next 21/36] can: mcp251xfd: mcp251xfd_chip_wait_for_osc_ready(): prepare for PLL support
` [PATCH net-next 22/36] can: mcp251xfd: mcp251xfd_chip_softreset_check(): wait for OSC ready before accessing chip
` [PATCH net-next 23/36] can: mcp251xfd: mcp251xfd_chip_timestamp_init(): factor out into separate function
` [PATCH net-next 24/36] can: mcp251xfd: mcp251xfd_chip_wake(): renamed from mcp251xfd_chip_clock_enable()
` [PATCH net-next 25/36] can: mcp251xfd: __mcp251xfd_chip_set_mode(): prepare for PLL support: improve error handling and diagnostics
` [PATCH net-next 26/36] can: mcp251xfd: mcp251xfd_chip_clock_init(): prepare for PLL support, wait for OSC ready
` [PATCH net-next 27/36] can: mcp251xfd: mcp251xfd_register(): prepare to activate PLL after softreset
` [PATCH net-next 28/36] can: mcp251xfd: add support for internal PLL
` [PATCH net-next 29/36] can: mcp251xfd: introduce struct mcp251xfd_tx_ring::nr and ::fifo_nr and make use of it
` [PATCH net-next 30/36] can: mcp251xfd: mcp251xfd_ring_init(): split ring_init into separate functions
` [PATCH net-next 31/36] can: mcp251xfd: ring: prepare to change order of TX and RX FIFOs
` [PATCH net-next 32/36] can: mcp251xfd: ring: "
` [PATCH net-next 33/36] can: mcp251xfd: ring: mcp251xfd_ring_init(): checked RAM usage of ring setup
` [PATCH net-next 34/36] can: mcp251xfd: ring: update FIFO setup debug info
` [PATCH net-next 35/36] can: mcp251xfd: prepare for multiple RX-FIFOs
` [PATCH net-next 36/36] can: mcp251xfd: mcp251xfd_priv: introduce macros specifying the number of supported TEF/RX/TX rings
can: m_can: tcan4x5x m_can_isr do not handle tx if rx fails
2022-02-23 8:55 UTC (17+ messages)
[syzbot] KASAN: invalid-free in skb_release_data
2022-02-23 0:20 UTC
[syzbot] WARNING in j1939_session_deactivate_activate_next
2022-02-22 19:50 UTC
Looking for CAN FD sample captures for socket-can hardware integration testing
2022-02-22 17:23 UTC (3+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox