messages from 2026-10-26 19:47:19 to 2026-10-30 11:46:18 UTC [more...]
[PATCH 0/9] arm64: renesas: r8a78000: Add PWM support
2026-10-30 11:46 UTC (12+ messages)
` [PATCH/RFC 1/9] dt-bindings: can: renesas,rcar-canfd: Document R-Car X5H support
` [PATCH 2/9] can: rcar_canfd: Add Runtime PM support
` [PATCH 3/9] can: rcar_canfd: Make clkp local
` [PATCH 4/9] can: rcar_canfd: Add support for R-Car Gen5
` [PATCH 5/9] dt-bindings: clock: renesas,r8a78000-cpg: Add CAN-FD clock
` [PATCH/RFC 6/9] arm64: dts: renesas: r8a78000: Add CAN-FD nodes
` [PATCH/DNI 7/9] clk: renesas: r8a78000: Add CAN-FD clocks
` [PATCH/DNI 8/9] pmdomain: renesas: r8a78000: Add CAN-FD support
` [PATCH/DNI 9/9] arm64: dts: renesas: ironhide: Enable CAN-FD
[PATCH v3 net] can: peak_usb: fix use-after-free on PCAN-USB disconnect
2026-10-30 11:20 UTC
[PATCH v7 00/13] can: peak_usb: fixes, cleanup and input validation hardening
2026-10-30 10:45 UTC (14+ messages)
` [PATCH v7 01/13] can: peak_usb: fix missing CAN_ERR_FLAG when reporting error counters
` [PATCH v7 02/13] can: peak_usb: add missing includes
` [PATCH v7 03/13] can: peak_usb: sort ctrlmode_supported flags
` [PATCH v7 04/13] can: peak_usb: harden PCAN-USB message validation
` [PATCH v7 05/13] can: peak_usb: replace open-coded bitmask operations with bitops
` [PATCH v7 06/13] can: peak_usb: harden channel handling in PCAN-USB FD
` [PATCH v7 07/13] can: peak_usb: fix RX cursor desync for self-received RTR frames with SRR
` [PATCH v7 08/13] can: peak_usb: reject records for unset channels in PCAN-USB Pro
` [PATCH v7 09/13] can: peak_usb: register the netdevs only once all channels are set up
` [PATCH v7 10/13] can: peak_usb: validate the data length of PCAN-USB Pro CAN records
` [PATCH v7 11/13] can: peak_usb: don't read past the message in PCAN-USB Pro decoders
` [PATCH v7 12/13] can: peak_usb: dump undecodable URBs once and rate limit decode errors
` [PATCH v7 13/13] can: peak_usb: don't return an uninitialized PCAN-USB CAN channel ID
[PATCH v2 net] can: peak_usb: fix use-after-free on PCAN-USB disconnect and init failure
2026-10-30 10:27 UTC (3+ messages)
[PATCH v6 00/13] can: peak_usb: fixes, cleanup and input validation hardening
2026-10-30 10:27 UTC (16+ messages)
` [PATCH v6 03/13] can: peak_usb: sort ctrlmode_supported flags
` [PATCH v6 06/13] can: peak_usb: harden channel handling in PCAN-USB FD
` [PATCH v6 08/13] can: peak_usb: reject records for unset channels in PCAN-USB Pro
` [PATCH v6 09/13] can: peak_usb: register the netdevs only once all channels are set up
` [PATCH v6 11/13] can: peak_usb: don't read past the message in PCAN-USB Pro decoders
[PATCH net v3 0/3] can: j1939: fix timer reference and cancellation races
2026-10-29 10:05 UTC (8+ messages)
` [PATCH net v3 1/3] can: j1939: fix session reference leaks on timer rearm
` [PATCH net v3 2/3] can: j1939: stop TX sends after session shutdown
` [PATCH net v3 3/3] can: j1939: enable context analysis
[PATCH v4] can: j1939: fix j1939_ecu refcount leak
2026-10-29 3:38 UTC (3+ messages)
[PATCH v12 0/7] can: protect the receive lists with a per-device lock
2026-10-28 21:31 UTC (12+ messages)
` [PATCH v12 1/7] can: replace ARPHRD_CAN type checks with can_get_ml_priv()
` [PATCH v12 2/7] can: isotp: check the return values of can_rx_register() in isotp_bind()
` [PATCH v12 3/7] can: protect the receive lists with a per-device lock
` [PATCH v12 4/7] can: raw, isotp: copy socket options outside of lock_sock()
` [PATCH v12 5/7] can: proc: reset pkg_stats atomics individually
` [PATCH v12 6/7] can: proc: skip stats calculation after reset in can_stat_update()
` [PATCH v12 7/7] can: proc: remove pointers from CAN specific proc output
[PATCH v8 1/2] can: dev: can_fill_info(): don't wake up controller if interface is down
2026-10-28 20:02 UTC (9+ messages)
` [PATCH v8 2/2] can: dev: can_tdc_fill_info(): don't read automatic TDCV "
` RE：[PATCH "
[PATCH net 0/1] can: bcm: bound per-socket RX operation resources
2026-10-28 16:04 UTC (13+ messages)
` [PATCH net 1/1] can: bcm: limit RX operation resource usage per socket
` [PATCH net v2 0/1] can: bcm: bound per-socket RX operation resources
` [PATCH net v2 1/1] can: bcm: limit RX operation resource usage per socket
[PATCH v6 1/3] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6563
2026-10-28 6:59 UTC (3+ messages)
[PATCH v5 1/3] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6563
2026-10-27 14:45 UTC (13+ messages)
` [PATCH v5 3/3] arm64: dts: imx95: Add support for Data Modul i.MX95 eDM SBC
[PATCH v3.2] can: j1939: fix j1939_ecu refcount leak
2026-10-27 14:35 UTC (4+ messages)
[PATCH v2 0/1] can: j1939: fix session reference leak on TX timer restart
2026-10-27 14:14 UTC (4+ messages)
` [PATCH v2 1/1] "
[PATCH v2 2/4] can: gs_usb: gs_usb_probe(): init netdev completely before register_candev()
2026-10-27 9:50 UTC (3+ messages)
[PATCH v5 0/3] can_rx_offload keeps a lockless irq_queue that the IRQ handlers fill and that is later spliced under skb_queue.lock into the NAPI-facing skb_queue. This works as long as a single context fills the irq_queue. flexcan with FLEXCAN_QUIRK_SECONDARY_MB_IRQ and mcf5441x use two mailbox IRQ lines. When those are affined to different CPUs the two handlers can enqueue into the same list at the same time and corrupt it
2026-10-27 9:35 UTC (3+ messages)
` [PATCH v5 3/3] can: gs_usb: check can_rx_offload_add_manual() return value
[PATCH 2/4] can: gs_usb: gs_usb_probe(): init netdev completely before register_candev()
2026-10-27 9:26 UTC (3+ messages)
[PATCH v3 0/4] gs_usb: fixes
2026-10-27 9:24 UTC (4+ messages)
` [syzbot ci] "
[PATCH 3/4] can: gs_usb: gs_usb_receive_bulk_callback(): check for overflow flag if SKB allocation fails
2026-10-27 7:37 UTC (2+ messages)
[PATCH] can: gs_usb: kill RX URBs before destroying the netdevs
2026-10-27 7:15 UTC (3+ messages)
[PATCH v7] can: dev: can_fill_info(): don't wake up controller if interface is down
2026-10-27 7:00 UTC (7+ messages)
` 回复：[PATCH "
` RE：[PATCH "
[PATCH 3/3] can: ifi_canfd: enable NAPI before starting the controller
2026-10-26 20:58 UTC (2+ messages)
[PATCH] can: softing: Fix locking in softing_card_shutdown()
2026-10-26 20:25 UTC (3+ messages)
page: | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox