From: Anssi Hannula <anssi.hannula@bitwise.fi>
To: Jimmy Assarsson <extja@kvaser.com>,
linux-can@vger.kernel.org, Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Jimmy Assarsson <jimmyassarsson@gmail.com>, stable@vger.kernel.org
Subject: Re: [PATCH v3 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
Date: Fri, 2 Sep 2022 14:40:36 +0300 [thread overview]
Message-ID: <e1c06d77-9758-49e3-f772-084d2df365b9@bitwise.fi> (raw)
In-Reply-To: <20220901122729.271-5-extja@kvaser.com>
Hi,
On 1.9.2022 15.27, Jimmy Assarsson wrote:
> Use the CMD_GET_CAPABILITIES_REQ command to query the device for certain
> capabilities. We are only interested in LISTENONLY mode and wither the
> device reports CAN error counters.
>
> And remove hard coded capabilities for all Leaf devices.
I think the second paragraph is no longer accurate.
But the patch itself works for me now with no regressions that I can see.
Tested-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Thanks for taking care of the patchset!
> Cc: stable@vger.kernel.org
> Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
> Reported-by: Anssi Hannula <anssi.hannula@bitwise.fi>
> Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
> ---
> Changes in v3
> - Rebased on 1d5eeda23f36 ("can: kvaser_usb: advertise timestamping capabilities and add ioctl support")
> - Add stable to CC
> - Re-add hard coded capabilities for Leaf M32C devices, to fix regression
> found by Anssi Hannula in v2 [1].
>
> Changes in v2:
> - New in v2. Replaces [PATCH 04/12] can: kvaser_usb: Mark Mini PCIe 2xHS as supporting
> error counters
> - Fixed Anssi's comments; https://lore.kernel.org/linux-can/9742e7ab-3650-74d8-5a44-136555788c08@bitwise.fi/
>
> [1] https://lore.kernel.org/linux-can/b25bc059-d776-146d-0b3c-41aecf4bd9f8@bitwise.fi/
>
> .../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 144 +++++++++++++++++-
> 1 file changed, 143 insertions(+), 1 deletion(-)
>
[...]
--
Anssi Hannula / Bitwise Oy
+358 503803997
next prev parent reply other threads:[~2022-09-02 11:47 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-01 12:27 [PATCH v3 00/15] can: kvaser_usb: Various fixes Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 01/15] can: kvaser_usb_leaf: Fix overread with an invalid command Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 02/15] can: kvaser_usb: Fix use of uninitialized completion Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 03/15] can: kvaser_usb: Fix possible completions during init_completion Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device Jimmy Assarsson
2022-09-02 11:40 ` Anssi Hannula [this message]
2022-09-03 18:21 ` Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 05/15] can: kvaser_usb: kvaser_usb_leaf: Rename {leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 06/15] can: kvaser_usb: kvaser_usb_leaf: Handle CMD_ERROR_EVENT Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 07/15] can: kvaser_usb_leaf: Set Warning state even without bus errors Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 08/15] can: kvaser_usb_leaf: Fix TX queue out of sync after restart Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 09/15] can: kvaser_usb_leaf: Fix CAN state " Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 10/15] can: kvaser_usb_leaf: Fix improved state not being reported Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 11/15] can: kvaser_usb_leaf: Fix wrong CAN state after stopping Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 12/15] can: kvaser_usb_leaf: Ignore stale bus-off after start Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 13/15] can: kvaser_usb_leaf: Fix bogus restart events Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 14/15] can: kvaser_usb: Add struct kvaser_usb_busparams Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 15/15] can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming Jimmy Assarsson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e1c06d77-9758-49e3-f772-084d2df365b9@bitwise.fi \
--to=anssi.hannula@bitwise.fi \
--cc=extja@kvaser.com \
--cc=jimmyassarsson@gmail.com \
--cc=linux-can@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox