From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Wagner Subject: how to apply j1939 Date: Thu, 1 Dec 2011 20:55:36 +0000 (UTC) Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Return-path: Received: from lo.gmane.org ([80.91.229.12]:39802 "EHLO lo.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753633Ab1LAVAK (ORCPT ); Thu, 1 Dec 2011 16:00:10 -0500 Received: from list by lo.gmane.org with local (Exim 4.69) (envelope-from ) id 1RWDjk-0001Ci-M5 for linux-can@vger.kernel.org; Thu, 01 Dec 2011 22:00:08 +0100 Received: from p549CB4C3.dip.t-dialin.net ([84.156.180.195]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 01 Dec 2011 22:00:08 +0100 Received: from wutz by p549CB4C3.dip.t-dialin.net with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 01 Dec 2011 22:00:08 +0100 Sender: linux-can-owner@vger.kernel.org List-ID: To: linux-can@vger.kernel.org Good evening together, I want to run the j1939-linux-can on my phycore MPC5121e-tiny. I am using the OSELAS.BSP-Phytec-phyCORE-MPC512x-tiny-PD10.1.1, Powerpc-603e-linux-gnu, ptxdist-2011.10.1. I got the kernel module 'can-j1939-modules', usertools 'can-j1939-utils' and the 'iproute2-j1939'. According to Mr Van Dijck, these 3 are necessary - thanks to you. I am an absolutely newbie, is there anywhere a documentation how to apply this 3 things that CAN j1939 is enabled on my board? Or would be anybody so kind and tell me which steps I have to do - I would be really thankful. Kind regards, Wolfgang