From: Wolfgang <wutz@unterderbruecke.de>
To: linux-can@vger.kernel.org
Subject: Re: backporting can & can-j1939
Date: Wed, 14 Dec 2011 18:19:45 +0000 (UTC) [thread overview]
Message-ID: <loom.20111214T190347-790@post.gmane.org> (raw)
In-Reply-To: 20111214154351.GB6112@e-circ.dyndns.org
> Hold here: Your 2.6.31 is too old for this feature.
> You must do : $ echo can0 > /proc/net/can-j1939/net
> as a legacy measure.
>
> You will be able to use $ip for adding/removing addressing info.
Ok, I will try that.
> > Error: either "dev" is duplicate, or "j1939" is a garbage.
>
> This makes me think you have the original 'stock' iproute2, and not
> the iproute2-j1939 one (but I'm not sure yet today).
Yes, you are right I was using the 'stock' iproute2, should I replace the stock
with the j1939 iproute2, before compiling the kernel? I think I understood that
wrong.
Do I have to replace the can-utils as well; I am still not complete aware how
the respitories differ from each other
--Wolfgang
next prev parent reply other threads:[~2011-12-14 18:20 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-06 10:44 using j1939 wutz
2011-12-06 12:14 ` Kurt Van Dijck
2011-12-06 12:28 ` Kurt Van Dijck
2011-12-06 12:37 ` Wolfgang
2011-12-06 13:18 ` Kurt Van Dijck
2011-12-07 8:55 ` Wolfgang
2011-12-07 14:33 ` using j1939: j1939.h Kurt Van Dijck
2011-12-07 14:50 ` Kurt Van Dijck
2011-12-08 12:23 ` Wolfgang
2011-12-08 12:30 ` using j1939: userspace binaries Kurt Van Dijck
2011-12-08 12:48 ` Wolfgang
2011-12-08 13:32 ` Kurt Van Dijck
2011-12-08 14:27 ` Wolfgang
2011-12-08 15:17 ` using j1939: AF_CAN missing Kurt Van Dijck
2011-12-08 15:34 ` Oliver Hartkopp
2011-12-08 15:19 ` iproute2-j1939 Kurt Van Dijck
2011-12-08 15:56 ` iproute2-j1939 Wolfgang
2011-12-08 16:44 ` iproute2-j1939 Wolfgang
2011-12-09 6:55 ` iproute2-j1939 Oliver Hartkopp
2011-12-09 7:28 ` iproute2-j1939 Wolfgang
2011-12-09 7:58 ` iproute2-j1939 Oliver Hartkopp
2011-12-09 8:07 ` iproute2-j1939 Kurt Van Dijck
2011-12-09 8:12 ` iproute2-j1939 Oliver Hartkopp
2011-12-09 9:02 ` iproute2-j1939 Wolfgang
2011-12-09 9:48 ` iproute2-j1939 Kurt Van Dijck
2011-12-09 10:56 ` iproute2-j1939 Wolfgang
2011-12-09 11:03 ` iproute2-j1939 Kurt Van Dijck
2011-12-09 11:12 ` iproute2-j1939 Wolfgang
2011-12-09 11:47 ` iproute2-j1939 Kurt Van Dijck
2011-12-09 12:14 ` iproute2-j1939 Wolfgang
2011-12-06 13:24 ` using j1939 Oliver Hartkopp
2011-12-09 13:47 ` Kurt Van Dijck
2011-12-09 13:58 ` Wolfgang
[not found] ` <20111209143224.GB309@e-circ.dyndns.org>
[not found] ` <20111209144911.144460@gmx.net>
2011-12-09 15:01 ` Kurt Van Dijck
2011-12-09 17:23 ` Wolfgang Wagner
2011-12-12 8:12 ` Kurt Van Dijck
2011-12-12 11:27 ` Wolfgang
2011-12-12 12:40 ` Kurt Van Dijck
2011-12-12 15:10 ` Wolfgang
2011-12-13 9:53 ` backporting can & can-j1939 Kurt Van Dijck
2011-12-13 15:20 ` Wolfgang
2011-12-13 15:51 ` Kurt Van Dijck
2011-12-13 18:49 ` Wolfgang
2011-12-14 13:29 ` Wolfgang
2011-12-14 15:43 ` Kurt Van Dijck
2011-12-14 18:19 ` Wolfgang [this message]
2011-12-14 20:42 ` Using " Kurt Van Dijck
2011-12-15 8:35 ` Wolfgang
2011-12-15 9:20 ` Cross-compiling iproute2-j1939 Kurt Van Dijck
2011-12-15 11:24 ` Wolfgang
2011-12-15 12:04 ` replacing iproute2 & can-utils with j1939 variants Kurt Van Dijck
2011-12-15 13:43 ` Wolfgang
2011-12-15 14:00 ` using can-j1939 Kurt Van Dijck
2011-12-15 14:49 ` Wolfgang
2011-12-15 15:06 ` Kurt Van Dijck
2011-12-15 15:16 ` Wolfgang
2011-12-15 15:50 ` Kurt Van Dijck
2011-12-15 16:17 ` Wolfgang
2011-12-16 8:37 ` Kurt Van Dijck
2011-12-16 9:00 ` Wolfgang
2011-12-16 9:33 ` Kurt Van Dijck
2011-12-16 14:29 ` Wolfgang
2011-12-17 19:20 ` Kurt Van Dijck
2011-12-20 10:35 ` API calls Wolfgang
2011-12-20 11:00 ` Kurt Van Dijck
2011-12-20 14:49 ` Wolfgang
2011-12-20 15:05 ` Kurt Van Dijck
2011-12-20 15:43 ` Wolfgang
2011-12-20 16:32 ` Kurt Van Dijck
2011-12-21 10:46 ` Wolfgang
2011-12-21 13:43 ` using can-j1939 Kurt Van Dijck
2011-12-21 15:11 ` Wolfgang
2011-12-21 15:53 ` Kurt Van Dijck
2011-12-22 13:06 ` Wolfgang
2011-12-23 11:04 ` Kurt Van Dijck
2011-12-28 10:49 ` Wolfgang
2012-01-04 9:47 ` Kurt Van Dijck
2012-01-04 16:28 ` recv list Wolfgang
2012-01-04 20:41 ` Kurt Van Dijck
2012-01-05 10:55 ` Wolfgang
2012-01-05 12:09 ` Kurt Van Dijck
2012-01-05 21:24 ` Wolfgang
2012-01-06 12:25 ` Kurt Van Dijck
2012-01-06 18:25 ` Wolfgang
2012-01-09 9:33 ` Kurt Van Dijck
2012-01-09 10:02 ` Changing addr with bind() Kurt Van Dijck
2012-01-09 10:23 ` Kurt Van Dijck
2012-01-09 10:46 ` recv list Wolfgang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=loom.20111214T190347-790@post.gmane.org \
--to=wutz@unterderbruecke.de \
--cc=linux-can@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).