From mboxrd@z Thu Jan 1 00:00:00 1970 From: swapnil Subject: Re: AW: Need support J1939 protocol support to my kernel (v3.8 on BeagleBone Black) Date: Wed, 15 Jan 2014 16:14:41 +0000 (UTC) Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Return-path: Received: from plane.gmane.org ([80.91.229.3]:51533 "EHLO plane.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751499AbaAOQPJ (ORCPT ); Wed, 15 Jan 2014 11:15:09 -0500 Received: from list by plane.gmane.org with local (Exim 4.69) (envelope-from ) id 1W3T7R-0007lC-V5 for linux-can@vger.kernel.org; Wed, 15 Jan 2014 17:15:05 +0100 Received: from 192.158.48.16 ([192.158.48.16]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Wed, 15 Jan 2014 17:15:05 +0100 Received: from patilswa by 192.158.48.16 with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Wed, 15 Jan 2014 17:15:05 +0100 Sender: linux-can-owner@vger.kernel.org List-ID: To: linux-can@vger.kernel.org Hi Kurt, Using the test code given by you I have developed an app but I am facing some issues i don't know its j1939 limitation or the stack. 1.I want to transmit and single frame message RACM message canId--18EAFEFF data 00EE00FFFFFFFFFFFF it asks to bind address with 0xFE note -can i transmit single frame message like raw can from any source address to any dest address. I think address claim is needed for only TP message 2. In case of multiple address claims like 0x80 and 0x90 if i want to transmit the data from both address parallel y do i need to create different socket for each address? 3.It don't reply for RACM message if i send from different adapter example: 18EAFEFF#00EE00FFFFFFFFFFFF j1939 stack should reply with claimed address Like 80 and 90 I was busy in creating the app to test the linux j1939 stack on begalbone Black. thank you very much for the test programs those helped me a lot Thank Swapnil